The RGA DMA descriptor list contains only 32-bit addresses. Set the
dma_mask to only allocate memory that is addressable by the descriptors.
This prevents errors when preparing vb2 buffers that were allocated by
the RGA.
Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
---
Changes in v2:
- Add mask for DMA coherent
- Set gfp_flags to DMA32
---
drivers/media/platform/rockchip/rga/rga.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index f18fccc7b204..ea566c11734a 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -98,6 +98,7 @@ queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
src_vq->drv_priv = ctx;
src_vq->ops = &rga_qops;
src_vq->mem_ops = &vb2_dma_sg_memops;
+ dst_vq->gfp_flags = __GFP_DMA32;
src_vq->buf_struct_size = sizeof(struct rga_vb_buffer);
src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
src_vq->lock = &ctx->rga->mutex;
@@ -112,6 +113,7 @@ queue_init(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)
dst_vq->drv_priv = ctx;
dst_vq->ops = &rga_qops;
dst_vq->mem_ops = &vb2_dma_sg_memops;
+ dst_vq->gfp_flags = __GFP_DMA32;
dst_vq->buf_struct_size = sizeof(struct rga_vb_buffer);
dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
dst_vq->lock = &ctx->rga->mutex;
@@ -824,6 +826,12 @@ static int rga_probe(struct platform_device *pdev)
goto err_put_clk;
}
+ ret = dma_set_mask_and_coherent(rga->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(rga->dev, "32-bit DMA not supported");
+ goto err_put_clk;
+ }
+
ret = v4l2_device_register(&pdev->dev, &rga->v4l2_dev);
if (ret)
goto err_put_clk;
--
2.39.2
