Hello everyone, This series is based on the fifth iteration of the series introducing the tw9900 driver: sent 29 Dec 2020 [1] This is the version 6 of the series adding support for the Techwell TW9900 multi standard decoder. It's a pretty simple decoder compared to the TW9910, since it doesn't have a built-in scaler/crop engine. Changes v5 => v6: - dropped .skip_top and .field in the supported_modes - added error handling for the i2c writes/reads - added the colorimetry information to fill_fmt - removed pm_runtime - added the g_input_status callback - dropped SECAM - dropped the non-standard PAL/NTSC variants Any feedback is appreciated, Mehdi Djait media_tree, base-commit: 2c1bae27df787c9535e48cc27bbd11c3c3e0a235 [1] https://lore.kernel.org/linux-media/20210401070802.1685823-1-maxime.chevallier@xxxxxxxxxxx/ Mehdi Djait (3): dt-bindings: vendor-prefixes: Add techwell vendor prefix media: dt-bindings: media: i2c: Add bindings for TW9900 media: i2c: Introduce a driver for the Techwell TW9900 decoder .../bindings/media/i2c/techwell,tw9900.yaml | 61 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 6 + drivers/media/i2c/Kconfig | 12 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tw9900.c | 651 ++++++++++++++++++ 6 files changed, 733 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml create mode 100644 drivers/media/i2c/tw9900.c -- 2.41.0
