[PATCH] gspca_sonixj: remove magic numbers for delay

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: MÃrton NÃmeth <nm127@xxxxxxxxxxx>

The number 0xdd is used for marking delay init sequence steps. Replace
0xdd values only if the meaning is delay.

Signed-off-by: MÃrton NÃmeth <nm127@xxxxxxxxxxx>
---
diff -upr a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
--- a/drivers/media/video/gspca/sonixj.c	2010-10-17 10:51:26.000000000 +0200
+++ b/drivers/media/video/gspca/sonixj.c	2010-10-17 11:22:33.000000000 +0200
@@ -572,20 +572,23 @@ static const u8 reg84[] = {
 	0x3e, 0x00, 0xcd, 0x0f, 0xf7, 0x0f,	/* VR VG VB */
 	0x00, 0x00, 0x00			/* YUV offsets */
 };
+
+#define DELAY		0xdd
+
 static const u8 adcm1700_sensor_init[][8] = {
 	{0xa0, 0x51, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x04, 0x08, 0x00, 0x00, 0x00, 0x10},	/* reset */
-	{0xdd, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	{DELAY, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 	{0xb0, 0x51, 0x04, 0x00, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	{DELAY, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 	{0xb0, 0x51, 0x0c, 0xe0, 0x2e, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x10, 0x02, 0x02, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x14, 0x0e, 0x0e, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x1c, 0x00, 0x80, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x20, 0x01, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	{DELAY, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 	{0xb0, 0x51, 0x04, 0x04, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+	{DELAY, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 	{0xb0, 0x51, 0x04, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa0, 0x51, 0xfe, 0x10, 0x00, 0x00, 0x00, 0x10},
 	{0xb0, 0x51, 0x14, 0x01, 0x00, 0x00, 0x00, 0x10},
@@ -629,7 +632,7 @@ static const u8 gc0307_sensor_init[][8]
 	{0xa0, 0x21, 0x0e, 0x02, 0x00, 0x00, 0x00, 0x10},
 	{0xa0, 0x21, 0x0f, 0xb2, 0x00, 0x00, 0x00, 0x10},
 	{0xa0, 0x21, 0x12, 0x70, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*delay 10ms*/
+	{DELAY, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /*delay 10ms*/
 	{0xa0, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa0, 0x21, 0x15, 0xb8, 0x00, 0x00, 0x00, 0x10},
 	{0xa0, 0x21, 0x16, 0x13, 0x00, 0x00, 0x00, 0x10},
@@ -772,7 +775,7 @@ static const u8 mo4000_sensor_init[][8]
 };
 static const u8 mt9v111_sensor_init[][8] = {
 	{0xb1, 0x5c, 0x0d, 0x00, 0x01, 0x00, 0x00, 0x10}, /* reset? */
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xb1, 0x5c, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xb1, 0x5c, 0x01, 0x00, 0x01, 0x00, 0x00, 0x10}, /* IFP select */
 	{0xb1, 0x5c, 0x08, 0x04, 0x80, 0x00, 0x00, 0x10}, /* output fmt ctrl */
@@ -860,10 +863,10 @@ static const u8 om6802_sensor_param1[][8
 static const u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
 /* win: i2c_r from 00 to 80 */
 	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
@@ -917,7 +920,7 @@ static const u8 ov7630_sensor_param1[][8
 static const u8 ov7648_sensor_init[][8] = {
 	{0xa1, 0x21, 0x76, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10},	/* reset */
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xa1, 0x21, 0x12, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xd1, 0x21, 0x03, 0xa4, 0x30, 0x88, 0x00, 0x10},
 	{0xb1, 0x21, 0x11, 0x80, 0x08, 0x00, 0x00, 0x10},
@@ -966,7 +969,7 @@ static const u8 ov7648_sensor_param1[][8

 static const u8 ov7660_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10},
 						/* Outformat = rawRGB */
 	{0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */
@@ -1062,7 +1065,7 @@ static const u8 ov7660_sensor_param1[][8
 static const u8 po1030_sensor_init[][8] = {
 /* the sensor registers are described in m5602/m5602_po1030.h */
 	{0xa1, 0x6e, 0x3f, 0x20, 0x00, 0x00, 0x00, 0x10}, /* sensor reset */
-	{0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+	{DELAY, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
 	{0xa1, 0x6e, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xd1, 0x6e, 0x04, 0x02, 0xb1, 0x02, 0x39, 0x10},
@@ -1116,10 +1119,10 @@ static const u8 po1030_sensor_param1[][8
 static const u8 po2030n_sensor_init[][8] = {
 	{0xa1, 0x6e, 0x1e, 0x1a, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x1f, 0x99, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 10ms */
+	{DELAY, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 10ms */
 	{0xa1, 0x6e, 0x1e, 0x0a, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x1f, 0x19, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 10ms */
+	{DELAY, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 10ms */
 	{0xa1, 0x6e, 0x20, 0x44, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x04, 0x03, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x05, 0x70, 0x00, 0x00, 0x00, 0x10},
@@ -1168,7 +1171,7 @@ static const u8 po2030n_sensor_init[][8]
 };
 static const u8 po2030n_sensor_param1[][8] = {
 	{0xa1, 0x6e, 0x1a, 0x01, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 8ms */
+	{DELAY, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 8ms */
 	{0xa1, 0x6e, 0x1b, 0xf4, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x6e, 0x15, 0x04, 0x00, 0x00, 0x00, 0x10},
 	{0xd1, 0x6e, 0x16, 0x50, 0x40, 0x49, 0x40, 0x10},
@@ -1182,16 +1185,16 @@ static const u8 po2030n_sensor_param1[][
 	{0xc1, 0x6e, 0x16, 0x52, 0x40, 0x48, 0x00, 0x10},
 /*after start*/
 	{0xa1, 0x6e, 0x15, 0x0f, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */
+	{DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */
 	{0xa1, 0x6e, 0x1a, 0x05, 0x00, 0x00, 0x00, 0x10},
-	{0xdd, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */
+	{DELAY, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 5ms */
 	{0xa1, 0x6e, 0x1b, 0x53, 0x00, 0x00, 0x00, 0x10},
 	{}
 };

 static const u8 soi768_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset */
-	{0xdd, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 96ms */
+	{DELAY, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 96ms */
 	{0xa1, 0x21, 0x12, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x0f, 0x03, 0x00, 0x00, 0x00, 0x10},
@@ -1466,7 +1469,7 @@ static void i2c_w_seq(struct gspca_dev *
 			const u8 (*data)[8])
 {
 	while ((*data)[0] != 0) {
-		if ((*data)[0] != 0xdd)
+		if ((*data)[0] != DELAY)
 			i2c_w8(gspca_dev, *data);
 		else
 			msleep((*data)[1]);
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux