From: Jason Chen <jason.z.chen@xxxxxxxxx>
ov08x40 sensor ISP has the following work modes:
- 1C mode: full size
- 4C1 mode: binning size
In 1c and 4c1 modes, different tline calculations are
applied.
- 1c mode: Tline value needs to be doubled as per the
vendor's update.
Tline time = 2 * HTS / SCLK
Exposure unit : 1 * HTS = 0.5 Tline
- 4c1 mode:
Tline time = 1 * HTS / SCLK
Exposure unit : 1 * HTS = 1 Tline
Signed-off-by: Jason Chen <jason.z.chen@xxxxxxxxx>
---
drivers/media/i2c/ov08x40.c | 58 ++++++++++++++++++++++++++++---------
1 file changed, 44 insertions(+), 14 deletions(-)
diff --git a/drivers/media/i2c/ov08x40.c b/drivers/media/i2c/ov08x40.c
index 637da4df690..acf6799d7fa 100644
--- a/drivers/media/i2c/ov08x40.c
+++ b/drivers/media/i2c/ov08x40.c
@@ -34,7 +34,7 @@
/* V_TIMING internal */
#define OV08X40_REG_VTS 0x380e
-#define OV08X40_VTS_30FPS 0x1388
+#define OV08X40_VTS_30FPS 0x09c4 /* the VTS need to be half in 1c */
#define OV08X40_VTS_BIN_30FPS 0x115c
#define OV08X40_VTS_MAX 0x7fff
@@ -44,8 +44,9 @@
/* Exposure control */
#define OV08X40_REG_EXPOSURE 0x3500
-#define OV08X40_EXPOSURE_MAX_MARGIN 31
-#define OV08X40_EXPOSURE_MIN 1
+#define OV08X40_EXPOSURE_MAX_MARGIN 8
+#define OV08X40_EXPOSURE_BIN_MAX_MARGIN 2
+#define OV08X40_EXPOSURE_MIN 4
#define OV08X40_EXPOSURE_STEP 1
#define OV08X40_EXPOSURE_DEFAULT 0x40
@@ -126,13 +127,17 @@ struct ov08x40_mode {
u32 vts_def;
u32 vts_min;
- /* HTS */
- u32 hts;
+ /* Line Length Pixels */
+ u32 llp;
/* Index of Link frequency config to be used */
u32 link_freq_index;
/* Default register values */
struct ov08x40_reg_list reg_list;
+
+ /* Exposure calculation */
+ u16 exposure_margin;
+ u16 exposure_shift;
};
static const struct ov08x40_reg mipi_data_rate_800mbps[] = {
@@ -2354,7 +2359,7 @@ static const char * const ov08x40_test_pattern_menu[] = {
/* Configurations for supported link frequencies */
#define OV08X40_LINK_FREQ_400MHZ 400000000ULL
-
+#define OV08X40_SCLK_96MHZ 96000000ULL
#define OV08X40_EXT_CLK 19200000
#define OV08X40_DATA_LANES 4
@@ -2392,26 +2397,30 @@ static const struct ov08x40_mode supported_modes[] = {
.height = 2416,
.vts_def = OV08X40_VTS_30FPS,
.vts_min = OV08X40_VTS_30FPS,
- .hts = 640,
+ .llp = 0x10aa, /* in 1c mode, tline time = 2 * HTS / SCLK */
.lanes = 4,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_3856x2416_regs),
.regs = mode_3856x2416_regs,
},
.link_freq_index = OV08X40_LINK_FREQ_400MHZ_INDEX,
+ .exposure_shift = 1,
+ .exposure_margin = OV08X40_EXPOSURE_MAX_MARGIN,
},
{
.width = 1928,
.height = 1208,
.vts_def = OV08X40_VTS_BIN_30FPS,
.vts_min = OV08X40_VTS_BIN_30FPS,
- .hts = 720,
+ .llp = 0x960,
.lanes = 4,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_1928x1208_regs),
.regs = mode_1928x1208_regs,
},
.link_freq_index = OV08X40_LINK_FREQ_400MHZ_INDEX,
+ .exposure_shift = 0,
+ .exposure_margin = OV08X40_EXPOSURE_BIN_MAX_MARGIN,
},
};
@@ -2667,13 +2676,22 @@ static int ov08x40_set_ctrl(struct v4l2_ctrl *ctrl)
struct ov08x40, ctrl_handler);
struct i2c_client *client = v4l2_get_subdevdata(&ov08x->sd);
s64 max;
+ int exp;
+ int vblank;
int ret = 0;
/* Propagate change of current control to all related controls */
switch (ctrl->id) {
case V4L2_CID_VBLANK:
/* Update max exposure while meeting expected vblanking */
- max = ov08x->cur_mode->height + ctrl->val - OV08X40_EXPOSURE_MAX_MARGIN;
+ /* because in 1c mode, 1 HTS = 0.5 tline
+ * fps = sclk / hts / vts
+ * so the vts value needs to be double
+ */
+ max = ((ov08x->cur_mode->height + ctrl->val) <<
+ ov08x->cur_mode->exposure_shift) -
+ ov08x->cur_mode->exposure_margin;
+
__v4l2_ctrl_modify_range(ov08x->exposure,
ov08x->exposure->minimum,
max, ov08x->exposure->step, max);
@@ -2697,15 +2715,23 @@ static int ov08x40_set_ctrl(struct v4l2_ctrl *ctrl)
ret = ov08x40_update_digital_gain(ov08x, ctrl->val);
break;
case V4L2_CID_EXPOSURE:
+ exp = (ctrl->val << ov08x->cur_mode->exposure_shift) -
+ ov08x->cur_mode->exposure_margin;
+
ret = ov08x40_write_reg(ov08x, OV08X40_REG_EXPOSURE,
OV08X40_REG_VALUE_24BIT,
- ctrl->val);
+ exp);
break;
case V4L2_CID_VBLANK:
+ vblank = ((ov08x->cur_mode->height + ctrl->val) <<
+ ov08x->cur_mode->exposure_shift);
+ /* frame length line should be aligned according
+ * to the value provided by the sensor vendor
+ */
+ vblank |= 0x4;
ret = ov08x40_write_reg(ov08x, OV08X40_REG_VTS,
OV08X40_REG_VALUE_16BIT,
- ov08x->cur_mode->height
- + ctrl->val);
+ vblank);
break;
case V4L2_CID_TEST_PATTERN:
ret = ov08x40_enable_test_pattern(ov08x, ctrl->val);
@@ -2849,7 +2875,9 @@ ov08x40_set_pad_format(struct v4l2_subdev *sd,
1,
vblank_def);
__v4l2_ctrl_s_ctrl(ov08x->vblank, vblank_def);
- h_blank = ov08x->cur_mode->hts;
+
+ h_blank = ov08x->cur_mode->llp - ov08x->cur_mode->width;
+
__v4l2_ctrl_modify_range(ov08x->hblank, h_blank,
h_blank, 1, h_blank);
}
@@ -3075,7 +3103,8 @@ static int ov08x40_init_controls(struct ov08x40 *ov08x)
OV08X40_VTS_MAX - mode->height, 1,
vblank_def);
- hblank = ov08x->cur_mode->hts;
+ hblank = ov08x->cur_mode->llp - ov08x->cur_mode->width;
+
ov08x->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov08x40_ctrl_ops,
V4L2_CID_HBLANK,
hblank, hblank, 1, hblank);
@@ -3320,6 +3349,7 @@ static struct i2c_driver ov08x40_i2c_driver = {
module_i2c_driver(ov08x40_i2c_driver);
MODULE_AUTHOR("Jason Chen <jason.z.chen@xxxxxxxxx>");
+MODULE_AUTHOR("Qingwu Zhang <qingwu.zhang@xxxxxxxxx>");
MODULE_AUTHOR("Shawn Tu");
MODULE_DESCRIPTION("OmniVision OV08X40 sensor driver");
MODULE_LICENSE("GPL");
--
2.34.1
