Hi Hans, FYI, as the atomisp driver has an mt9m114 driver. There's certainly no urgency to replace it, but if you have a machine on which you could test this driver, it could be nice at some point in the future. Any issue you encounter can be fixed on top of this series (in particular, dynamically computing the PLL configuration would be very nice). On Wed, Sep 20, 2023 at 08:11:52PM +0300, Laurent Pinchart wrote: > Hello, > > This series adds a driver for the onsemi MT9M114 camera sensor. It's all > a pretty standard story, DT bindings are in 1/2, and the driver in 2/2. > Review comments from v3 have all been taken into account as far as I can > tell. > > The driver has been tested with an i.MX8MM in CSI-2 mode. Jacopo tested > v2 in parallel mode, but given the number of changes in v3, I haven't > kept the Tested-by tag. > > Laurent Pinchart (2): > media: dt-bindings: media: i2c: Add MT9M114 camera sensor binding > media: i2c: Add driver for onsemi MT9M114 camera sensor > > .../bindings/media/i2c/onnn,mt9m114.yaml | 114 + > MAINTAINERS | 8 + > drivers/media/i2c/Kconfig | 10 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/mt9m114.c | 2481 +++++++++++++++++ > 5 files changed, 2614 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml > create mode 100644 drivers/media/i2c/mt9m114.c > > > base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d -- Regards, Laurent Pinchart
