Re: [PATCH v4 06/12] media: ccs: Use sub-device active state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Sun, Sep 24, 2023 at 03:57:43PM +0300, Laurent Pinchart wrote:
> Hi Sakari,
> 
> Thank you for the patch.
> 
> On Fri, Sep 22, 2023 at 02:57:24PM +0300, Sakari Ailus wrote:
> > Make use of sub-device active state. In most cases the effect on need for
> > acquiring the mutex is non-existent as access to the driver's core data
> > structure still needs to be serialised.
> 
> Will this change when you drop
> 
> 	const struct ccs_csi_data_format *csi_format;
> 	const struct ccs_csi_data_format *internal_csi_format;
> 	struct v4l2_rect pa_src, scaler_sink, src_src;
> 
> from struct ccs_sensor ?

You could use a single mutex in that case. But we'll need to change the
UAPI first to gte rid of the control dependency which I'd say is out of
scope of this patchset.

> 
> > This still removes a lot of code as the code paths for active and try
> > state are the same in many cases.
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/media/i2c/ccs/ccs-core.c | 278 ++++++++++++-------------------
> >  drivers/media/i2c/ccs/ccs.h      |   4 +-
> >  2 files changed, 103 insertions(+), 179 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
> > index a4f593866ad6..7c53bbda5b8d 100644
> > --- a/drivers/media/i2c/ccs/ccs-core.c
> > +++ b/drivers/media/i2c/ccs/ccs-core.c
> > @@ -508,9 +508,8 @@ static void __ccs_update_exposure_limits(struct ccs_sensor *sensor)
> >  	struct v4l2_ctrl *ctrl = sensor->exposure;
> >  	int max;
> >  
> > -	max = sensor->pixel_array->crop[CCS_PA_PAD_SRC].height
> > -		+ sensor->vblank->val
> > -		- CCS_LIM(sensor, COARSE_INTEGRATION_TIME_MAX_MARGIN);
> > +	max = sensor->pa_src.height + sensor->vblank->val -
> > +		CCS_LIM(sensor, COARSE_INTEGRATION_TIME_MAX_MARGIN);
> >  
> >  	__v4l2_ctrl_modify_range(ctrl, ctrl->minimum, max, ctrl->step, max);
> >  }
> > @@ -728,15 +727,12 @@ static int ccs_set_ctrl(struct v4l2_ctrl *ctrl)
> >  		break;
> >  	case V4L2_CID_VBLANK:
> >  		rval = ccs_write(sensor, FRAME_LENGTH_LINES,
> > -				 sensor->pixel_array->crop[
> > -					 CCS_PA_PAD_SRC].height
> > -				 + ctrl->val);
> > +				 sensor->pa_src.height + ctrl->val);
> >  
> >  		break;
> >  	case V4L2_CID_HBLANK:
> >  		rval = ccs_write(sensor, LINE_LENGTH_PCK,
> > -				 sensor->pixel_array->crop[CCS_PA_PAD_SRC].width
> > -				 + ctrl->val);
> > +				 sensor->pa_src.width + ctrl->val);
> >  
> >  		break;
> >  	case V4L2_CID_TEST_PATTERN:
> > @@ -1214,15 +1210,13 @@ static void ccs_update_blanking(struct ccs_sensor *sensor)
> >  
> >  	min = max_t(int,
> >  		    CCS_LIM(sensor, MIN_FRAME_BLANKING_LINES),
> > -		    min_fll - sensor->pixel_array->crop[CCS_PA_PAD_SRC].height);
> > -	max = max_fll -	sensor->pixel_array->crop[CCS_PA_PAD_SRC].height;
> > +		    min_fll - sensor->pa_src.height);
> > +	max = max_fll -	sensor->pa_src.height;
> >  
> >  	__v4l2_ctrl_modify_range(vblank, min, max, vblank->step, min);
> >  
> > -	min = max_t(int,
> > -		    min_llp - sensor->pixel_array->crop[CCS_PA_PAD_SRC].width,
> > -		    min_lbp);
> > -	max = max_llp - sensor->pixel_array->crop[CCS_PA_PAD_SRC].width;
> > +	min = max_t(int, min_llp - sensor->pa_src.width, min_lbp);
> > +	max = max_llp - sensor->pa_src.width;
> >  
> >  	__v4l2_ctrl_modify_range(hblank, min, max, hblank->step, min);
> >  
> > @@ -1246,10 +1240,8 @@ static int ccs_pll_blanking_update(struct ccs_sensor *sensor)
> >  
> >  	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
> >  		sensor->pll.pixel_rate_pixel_array /
> > -		((sensor->pixel_array->crop[CCS_PA_PAD_SRC].width
> > -		  + sensor->hblank->val) *
> > -		 (sensor->pixel_array->crop[CCS_PA_PAD_SRC].height
> > -		  + sensor->vblank->val) / 100));
> > +		((sensor->pa_src.width + sensor->hblank->val) *
> > +		 (sensor->pa_src.height + sensor->vblank->val) / 100));
> >  
> >  	return 0;
> >  }
> > @@ -1756,28 +1748,22 @@ static int ccs_start_streaming(struct ccs_sensor *sensor)
> >  		goto out;
> >  
> >  	/* Analog crop start coordinates */
> > -	rval = ccs_write(sensor, X_ADDR_START,
> > -			 sensor->pixel_array->crop[CCS_PA_PAD_SRC].left);
> > +	rval = ccs_write(sensor, X_ADDR_START, sensor->pa_src.left);
> >  	if (rval < 0)
> >  		goto out;
> >  
> > -	rval = ccs_write(sensor, Y_ADDR_START,
> > -			 sensor->pixel_array->crop[CCS_PA_PAD_SRC].top);
> > +	rval = ccs_write(sensor, Y_ADDR_START, sensor->pa_src.top);
> >  	if (rval < 0)
> >  		goto out;
> >  
> >  	/* Analog crop end coordinates */
> > -	rval = ccs_write(
> > -		sensor, X_ADDR_END,
> > -		sensor->pixel_array->crop[CCS_PA_PAD_SRC].left
> > -		+ sensor->pixel_array->crop[CCS_PA_PAD_SRC].width - 1);
> > +	rval = ccs_write(sensor, X_ADDR_END,
> > +			 sensor->pa_src.left + sensor->pa_src.width - 1);
> >  	if (rval < 0)
> >  		goto out;
> >  
> > -	rval = ccs_write(
> > -		sensor, Y_ADDR_END,
> > -		sensor->pixel_array->crop[CCS_PA_PAD_SRC].top
> > -		+ sensor->pixel_array->crop[CCS_PA_PAD_SRC].height - 1);
> > +	rval = ccs_write(sensor, Y_ADDR_END,
> > +			 sensor->pa_src.top + sensor->pa_src.height - 1);
> >  	if (rval < 0)
> >  		goto out;
> >  
> > @@ -1789,27 +1775,23 @@ static int ccs_start_streaming(struct ccs_sensor *sensor)
> >  	/* Digital crop */
> >  	if (CCS_LIM(sensor, DIGITAL_CROP_CAPABILITY)
> >  	    == CCS_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
> > -		rval = ccs_write(
> > -			sensor, DIGITAL_CROP_X_OFFSET,
> > -			sensor->scaler->crop[CCS_PAD_SINK].left);
> > +		rval = ccs_write(sensor, DIGITAL_CROP_X_OFFSET,
> > +				 sensor->scaler_sink.left);
> >  		if (rval < 0)
> >  			goto out;
> >  
> > -		rval = ccs_write(
> > -			sensor, DIGITAL_CROP_Y_OFFSET,
> > -			sensor->scaler->crop[CCS_PAD_SINK].top);
> > +		rval = ccs_write(sensor, DIGITAL_CROP_Y_OFFSET,
> > +				 sensor->scaler_sink.top);
> >  		if (rval < 0)
> >  			goto out;
> >  
> > -		rval = ccs_write(
> > -			sensor, DIGITAL_CROP_IMAGE_WIDTH,
> > -			sensor->scaler->crop[CCS_PAD_SINK].width);
> > +		rval = ccs_write(sensor, DIGITAL_CROP_IMAGE_WIDTH,
> > +				 sensor->scaler_sink.width);
> >  		if (rval < 0)
> >  			goto out;
> >  
> > -		rval = ccs_write(
> > -			sensor, DIGITAL_CROP_IMAGE_HEIGHT,
> > -			sensor->scaler->crop[CCS_PAD_SINK].height);
> > +		rval = ccs_write(sensor, DIGITAL_CROP_IMAGE_HEIGHT,
> > +				 sensor->scaler_sink.height);
> >  		if (rval < 0)
> >  			goto out;
> >  	}
> > @@ -1827,12 +1809,10 @@ static int ccs_start_streaming(struct ccs_sensor *sensor)
> >  	}
> >  
> >  	/* Output size from sensor */
> > -	rval = ccs_write(sensor, X_OUTPUT_SIZE,
> > -			 sensor->src->crop[CCS_PAD_SRC].width);
> > +	rval = ccs_write(sensor, X_OUTPUT_SIZE, sensor->src_src.width);
> >  	if (rval < 0)
> >  		goto out;
> > -	rval = ccs_write(sensor, Y_OUTPUT_SIZE,
> > -			 sensor->src->crop[CCS_PAD_SRC].height);
> > +	rval = ccs_write(sensor, Y_OUTPUT_SIZE, sensor->src_src.height);
> >  	if (rval < 0)
> >  		goto out;
> >  
> > @@ -2053,24 +2033,8 @@ static int __ccs_get_format(struct v4l2_subdev *subdev,
> >  			    struct v4l2_subdev_state *sd_state,
> >  			    struct v4l2_subdev_format *fmt)
> >  {
> > -	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > -
> > -	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> > -		fmt->format = *v4l2_subdev_get_try_format(subdev, sd_state,
> > -							  fmt->pad);
> > -	} else {
> > -		struct v4l2_rect *r;
> > -
> > -		if (fmt->pad == ssd->source_pad)
> > -			r = &ssd->crop[ssd->source_pad];
> > -		else
> > -			r = &ssd->sink_fmt;
> > -
> > -		fmt->format.code = __ccs_get_mbus_code(subdev, fmt->pad);
> > -		fmt->format.width = r->width;
> > -		fmt->format.height = r->height;
> > -		fmt->format.field = V4L2_FIELD_NONE;
> > -	}
> > +	fmt->format = *v4l2_subdev_get_pad_format(subdev, sd_state, fmt->pad);
> > +	fmt->format.code = __ccs_get_mbus_code(subdev, fmt->pad);
> >  
> >  	return 0;
> >  }
> > @@ -2092,28 +2056,18 @@ static int ccs_get_format(struct v4l2_subdev *subdev,
> >  static void ccs_get_crop_compose(struct v4l2_subdev *subdev,
> >  				 struct v4l2_subdev_state *sd_state,
> >  				 struct v4l2_rect **crops,
> > -				 struct v4l2_rect **comps, int which)
> > +				 struct v4l2_rect **comps)
> >  {
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> >  	unsigned int i;
> >  
> > -	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -		if (crops)
> > -			for (i = 0; i < subdev->entity.num_pads; i++)
> > -				crops[i] = &ssd->crop[i];
> > -		if (comps)
> > -			*comps = &ssd->compose;
> > -	} else {
> > -		if (crops) {
> > -			for (i = 0; i < subdev->entity.num_pads; i++)
> > -				crops[i] = v4l2_subdev_get_try_crop(subdev,
> > -								    sd_state,
> > -								    i);
> > -		}
> > -		if (comps)
> > -			*comps = v4l2_subdev_get_try_compose(subdev, sd_state,
> > -							     CCS_PAD_SINK);
> > -	}
> > +	if (crops)
> > +		for (i = 0; i < subdev->entity.num_pads; i++)
> > +			crops[i] =
> > +				v4l2_subdev_get_pad_crop(subdev, sd_state, i);
> > +	if (comps)
> > +		*comps = v4l2_subdev_get_pad_compose(subdev, sd_state,
> > +						     ssd->sink_pad);
> >  }
> >  
> >  /* Changes require propagation only on sink pad. */
> > @@ -2125,7 +2079,7 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> >  	struct v4l2_rect *comp, *crops[CCS_PADS];
> >  
> > -	ccs_get_crop_compose(subdev, sd_state, crops, &comp, which);
> > +	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> >  
> >  	switch (target) {
> >  	case V4L2_SEL_TGT_CROP:
> > @@ -2136,6 +2090,7 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
> >  				sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
> >  				sensor->scaling_mode =
> >  					CCS_SCALING_MODE_NO_SCALING;
> > +				sensor->scaler_sink = *comp;
> >  			} else if (ssd == sensor->binner) {
> >  				sensor->binning_horizontal = 1;
> >  				sensor->binning_vertical = 1;
> > @@ -2144,6 +2099,8 @@ static void ccs_propagate(struct v4l2_subdev *subdev,
> >  		fallthrough;
> >  	case V4L2_SEL_TGT_COMPOSE:
> >  		*crops[CCS_PAD_SRC] = *comp;
> > +		if (which == V4L2_SUBDEV_FORMAT_ACTIVE && ssd == sensor->src)
> > +			sensor->src_src = *crops[CCS_PAD_SRC];
> >  		break;
> >  	default:
> >  		WARN_ON_ONCE(1);
> > @@ -2252,14 +2209,12 @@ static int ccs_set_format(struct v4l2_subdev *subdev,
> >  		      CCS_LIM(sensor, MIN_Y_OUTPUT_SIZE),
> >  		      CCS_LIM(sensor, MAX_Y_OUTPUT_SIZE));
> >  
> > -	ccs_get_crop_compose(subdev, sd_state, crops, NULL, fmt->which);
> > +	ccs_get_crop_compose(subdev, sd_state, crops, NULL);
> >  
> >  	crops[ssd->sink_pad]->left = 0;
> >  	crops[ssd->sink_pad]->top = 0;
> >  	crops[ssd->sink_pad]->width = fmt->format.width;
> >  	crops[ssd->sink_pad]->height = fmt->format.height;
> > -	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> > -		ssd->sink_fmt = *crops[ssd->sink_pad];
> >  	ccs_propagate(subdev, sd_state, fmt->which, V4L2_SEL_TGT_CROP);
> >  
> >  	mutex_unlock(&sensor->mutex);
> > @@ -2482,7 +2437,7 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> >  	struct v4l2_rect *comp, *crops[CCS_PADS];
> >  
> > -	ccs_get_crop_compose(subdev, sd_state, crops, &comp, sel->which);
> > +	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> >  
> >  	sel->r.top = 0;
> >  	sel->r.left = 0;
> > @@ -2501,8 +2456,8 @@ static int ccs_set_compose(struct v4l2_subdev *subdev,
> >  	return 0;
> >  }
> >  
> > -static int __ccs_sel_supported(struct v4l2_subdev *subdev,
> > -			       struct v4l2_subdev_selection *sel)
> > +static int ccs_sel_supported(struct v4l2_subdev *subdev,
> > +			     struct v4l2_subdev_selection *sel)
> >  {
> >  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > @@ -2545,33 +2500,18 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
> >  {
> >  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> > -	struct v4l2_rect *src_size, *crops[CCS_PADS];
> > -	struct v4l2_rect _r;
> > +	struct v4l2_rect src_size = { 0 }, *crops[CCS_PADS], *comp;
> >  
> > -	ccs_get_crop_compose(subdev, sd_state, crops, NULL, sel->which);
> > +	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> >  
> > -	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -		if (sel->pad == ssd->sink_pad)
> > -			src_size = &ssd->sink_fmt;
> > -		else
> > -			src_size = &ssd->compose;
> > +	if (sel->pad == ssd->sink_pad) {
> > +		struct v4l2_mbus_framefmt *mfmt =
> > +			v4l2_subdev_get_pad_format(subdev, sd_state, sel->pad);
> > +
> > +		src_size.width = mfmt->width;
> > +		src_size.height = mfmt->height;
> >  	} else {
> > -		if (sel->pad == ssd->sink_pad) {
> > -			_r.left = 0;
> > -			_r.top = 0;
> > -			_r.width = v4l2_subdev_get_try_format(subdev,
> > -							      sd_state,
> > -							      sel->pad)
> > -				->width;
> > -			_r.height = v4l2_subdev_get_try_format(subdev,
> > -							       sd_state,
> > -							       sel->pad)
> > -				->height;
> > -			src_size = &_r;
> > -		} else {
> > -			src_size = v4l2_subdev_get_try_compose(
> > -				subdev, sd_state, ssd->sink_pad);
> > -		}
> > +		src_size = *comp;
> >  	}
> >  
> >  	if (ssd == sensor->src && sel->pad == CCS_PAD_SRC) {
> > @@ -2579,16 +2519,19 @@ static int ccs_set_crop(struct v4l2_subdev *subdev,
> >  		sel->r.top = 0;
> >  	}
> >  
> > -	sel->r.width = min(sel->r.width, src_size->width);
> > -	sel->r.height = min(sel->r.height, src_size->height);
> > +	sel->r.width = min(sel->r.width, src_size.width);
> > +	sel->r.height = min(sel->r.height, src_size.height);
> >  
> > -	sel->r.left = min_t(int, sel->r.left, src_size->width - sel->r.width);
> > -	sel->r.top = min_t(int, sel->r.top, src_size->height - sel->r.height);
> > +	sel->r.left = min_t(int, sel->r.left, src_size.width - sel->r.width);
> > +	sel->r.top = min_t(int, sel->r.top, src_size.height - sel->r.height);
> >  
> >  	*crops[sel->pad] = sel->r;
> 
> The crops variable stores all crop rectangles for all pads, and here you
> end up using the crop rectangle on sel->pad only. I understand where
> ccs_get_crop_compose() comes from, with the need to manually handle the
> active and try state, but now that this has gone, I would replace the
> call to ccs_get_crop_compose() above with a call to
> v4l2_subdev_get_pad_crop(). ccs_set_format() can be cleaned up
> similarly, and actually ccs_set_compose() too. I think dropping
> ccs_get_crop_compose() would now be cleaner.

There are five locations where ccs_get_crop_compose() is used. It would be
possible to get rid of it, yes, but requires handling the loop (or
unrolling it) in the caller functions. I'm not sure I like the idea. There
might be one or two instances where a single crop rectangle is needed, in
that case it would make sense to use v4l2_subdev_get_pad_crop() instead.
I'd prefer to do this in la later patch though: this one is already a large
enough.

> 
> >  
> >  	if (ssd != sensor->pixel_array && sel->pad == CCS_PAD_SINK)
> >  		ccs_propagate(subdev, sd_state, sel->which, V4L2_SEL_TGT_CROP);
> > +	else if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
> > +		 ssd == sensor->pixel_array)
> > +		sensor->pa_src = sel->r;
> 
> pa_src is assigned here only, and accessed in different places in the
> driver. I think you can already drop the field, and access the active
> state in the places where pa_src is used. The same seems to be true for
> scaler_sink and src_src actually.
> 
> If you want to make those modifications on top I'm not opposed to it,
> but they should land sooner than later, and I don't really see a reason
> for not doing it now. I may be missing something of course.

As noted in the reply to your first question --- that requires changing the
UAPI which is out of scope of this set.

Or, alternatively: use the active state to store control values. That
should be done in any case.

> 
> >  
> >  	return 0;
> >  }
> > @@ -2601,44 +2544,36 @@ static void ccs_get_native_size(struct ccs_subdev *ssd, struct v4l2_rect *r)
> >  	r->height = CCS_LIM(ssd->sensor, Y_ADDR_MAX) + 1;
> >  }
> >  
> > -static int __ccs_get_selection(struct v4l2_subdev *subdev,
> > -			       struct v4l2_subdev_state *sd_state,
> > -			       struct v4l2_subdev_selection *sel)
> > +static int ccs_get_selection(struct v4l2_subdev *subdev,
> > +			     struct v4l2_subdev_state *sd_state,
> > +			     struct v4l2_subdev_selection *sel)
> >  {
> >  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> >  	struct ccs_subdev *ssd = to_ccs_subdev(subdev);
> >  	struct v4l2_rect *comp, *crops[CCS_PADS];
> > -	struct v4l2_rect sink_fmt;
> >  	int ret;
> >  
> > -	ret = __ccs_sel_supported(subdev, sel);
> > +	ret = ccs_sel_supported(subdev, sel);
> >  	if (ret)
> >  		return ret;
> >  
> > -	ccs_get_crop_compose(subdev, sd_state, crops, &comp, sel->which);
> > -
> > -	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > -		sink_fmt = ssd->sink_fmt;
> > -	} else {
> > -		struct v4l2_mbus_framefmt *fmt =
> > -			v4l2_subdev_get_try_format(subdev, sd_state,
> > -						   ssd->sink_pad);
> > -
> > -		sink_fmt.left = 0;
> > -		sink_fmt.top = 0;
> > -		sink_fmt.width = fmt->width;
> > -		sink_fmt.height = fmt->height;
> > -	}
> > +	ccs_get_crop_compose(subdev, sd_state, crops, &comp);
> >  
> >  	switch (sel->target) {
> >  	case V4L2_SEL_TGT_CROP_BOUNDS:
> >  	case V4L2_SEL_TGT_NATIVE_SIZE:
> > -		if (ssd == sensor->pixel_array)
> > +		if (ssd == sensor->pixel_array) {
> >  			ccs_get_native_size(ssd, &sel->r);
> > -		else if (sel->pad == ssd->sink_pad)
> > -			sel->r = sink_fmt;
> > -		else
> > +		} else if (sel->pad == ssd->sink_pad) {
> > +			struct v4l2_mbus_framefmt *sink_fmt =
> > +				v4l2_subdev_get_pad_format(subdev, sd_state,
> > +							   ssd->sink_pad);
> > +			sel->r.top = sel->r.left = 0;
> > +			sel->r.width = sink_fmt->width;
> > +			sel->r.height = sink_fmt->height;
> > +		} else {
> >  			sel->r = *comp;
> > +		}
> >  		break;
> >  	case V4L2_SEL_TGT_CROP:
> >  	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> > @@ -2652,20 +2587,6 @@ static int __ccs_get_selection(struct v4l2_subdev *subdev,
> >  	return 0;
> >  }
> >  
> > -static int ccs_get_selection(struct v4l2_subdev *subdev,
> > -			     struct v4l2_subdev_state *sd_state,
> > -			     struct v4l2_subdev_selection *sel)
> > -{
> > -	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> > -	int rval;
> > -
> > -	mutex_lock(&sensor->mutex);
> > -	rval = __ccs_get_selection(subdev, sd_state, sel);
> > -	mutex_unlock(&sensor->mutex);
> > -
> > -	return rval;
> > -}
> > -
> >  static int ccs_set_selection(struct v4l2_subdev *subdev,
> >  			     struct v4l2_subdev_state *sd_state,
> >  			     struct v4l2_subdev_selection *sel)
> > @@ -2673,7 +2594,7 @@ static int ccs_set_selection(struct v4l2_subdev *subdev,
> >  	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
> >  	int ret;
> >  
> > -	ret = __ccs_sel_supported(subdev, sel);
> > +	ret = ccs_sel_supported(subdev, sel);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -2964,10 +2885,14 @@ static int ccs_register_subdev(struct ccs_sensor *sensor,
> >  		return rval;
> >  	}
> >  
> > +	rval = v4l2_subdev_init_finalize(&ssd->sd);
> > +	if (rval)
> > +		goto out_media_entity_cleanup;
> > +
> >  	rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev, &ssd->sd);
> >  	if (rval) {
> >  		dev_err(&client->dev, "v4l2_device_register_subdev failed\n");
> > -		goto out_media_entity_cleanup;
> > +		goto out_v4l2_subdev_cleanup;
> >  	}
> >  
> >  	rval = media_create_pad_link(&ssd->sd.entity, source_pad,
> > @@ -2983,6 +2908,9 @@ static int ccs_register_subdev(struct ccs_sensor *sensor,
> >  out_v4l2_device_unregister_subdev:
> >  	v4l2_device_unregister_subdev(&ssd->sd);
> >  
> > +out_v4l2_subdev_cleanup:
> > +	v4l2_subdev_cleanup(&ssd->sd);
> > +
> >  out_media_entity_cleanup:
> >  	media_entity_cleanup(&ssd->sd.entity);
> >  
> > @@ -3059,16 +2987,9 @@ static void ccs_create_subdev(struct ccs_sensor *sensor,
> >  
> >  	v4l2_i2c_subdev_set_name(&ssd->sd, client, sensor->minfo.name, name);
> >  
> > -	ccs_get_native_size(ssd, &ssd->sink_fmt);
> > -
> > -	ssd->compose.width = ssd->sink_fmt.width;
> > -	ssd->compose.height = ssd->sink_fmt.height;
> > -	ssd->crop[ssd->source_pad] = ssd->compose;
> >  	ssd->pads[ssd->source_pad].flags = MEDIA_PAD_FL_SOURCE;
> > -	if (ssd != sensor->pixel_array) {
> > -		ssd->crop[ssd->sink_pad] = ssd->compose;
> > +	if (ssd != sensor->pixel_array)
> >  		ssd->pads[ssd->sink_pad].flags = MEDIA_PAD_FL_SINK;
> > -	}
> >  
> >  	ssd->sd.entity.ops = &ccs_entity_ops;
> >  
> > @@ -3090,24 +3011,24 @@ static int ccs_init_cfg(struct v4l2_subdev *sd,
> >  	mutex_lock(&sensor->mutex);
> >  
> >  	for (i = 0; i < ssd->npads; i++) {
> > -		struct v4l2_mbus_framefmt *try_fmt =
> > -			v4l2_subdev_get_try_format(sd, sd_state, i);
> > -		struct v4l2_rect *try_crop =
> > -			v4l2_subdev_get_try_crop(sd, sd_state, i);
> > -		struct v4l2_rect *try_comp;
> > +		struct v4l2_mbus_framefmt *fmt =
> > +			v4l2_subdev_get_pad_format(sd, sd_state, i);
> > +		struct v4l2_rect *crop =
> > +			v4l2_subdev_get_pad_crop(sd, sd_state, i);
> > +		struct v4l2_rect *comp;
> >  
> > -		ccs_get_native_size(ssd, try_crop);
> > +		ccs_get_native_size(ssd, crop);
> >  
> > -		try_fmt->width = try_crop->width;
> > -		try_fmt->height = try_crop->height;
> > -		try_fmt->code = sensor->internal_csi_format->code;
> > -		try_fmt->field = V4L2_FIELD_NONE;
> > +		fmt->width = crop->width;
> > +		fmt->height = crop->height;
> > +		fmt->code = sensor->internal_csi_format->code;
> > +		fmt->field = V4L2_FIELD_NONE;
> >  
> >  		if (ssd == sensor->pixel_array)
> >  			continue;
> >  
> > -		try_comp = v4l2_subdev_get_try_compose(sd, sd_state, i);
> > -		*try_comp = *try_crop;
> > +		comp = v4l2_subdev_get_pad_compose(sd, sd_state, i);
> > +		*comp = *crop;
> >  	}
> >  
> >  	mutex_unlock(&sensor->mutex);
> > @@ -3632,6 +3553,10 @@ static int ccs_probe(struct i2c_client *client)
> >  	if (rval < 0)
> >  		goto out_media_entity_cleanup;
> >  
> > +	rval = v4l2_subdev_init_finalize(&sensor->src->sd);
> > +	if (rval)
> > +		goto out_media_entity_cleanup;
> > +
> >  	rval = ccs_write_msr_regs(sensor);
> >  	if (rval)
> >  		goto out_media_entity_cleanup;
> > @@ -3691,6 +3616,7 @@ static void ccs_remove(struct i2c_client *client)
> >  
> >  	for (i = 0; i < sensor->ssds_used; i++) {
> >  		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
> > +		v4l2_subdev_cleanup(subdev);
> >  		media_entity_cleanup(&sensor->ssds[i].sd.entity);
> >  	}
> >  	ccs_cleanup(sensor);
> > diff --git a/drivers/media/i2c/ccs/ccs.h b/drivers/media/i2c/ccs/ccs.h
> > index a94c796cea48..9c3587b2fbe7 100644
> > --- a/drivers/media/i2c/ccs/ccs.h
> > +++ b/drivers/media/i2c/ccs/ccs.h
> > @@ -182,9 +182,6 @@ struct ccs_binning_subtype {
> >  struct ccs_subdev {
> >  	struct v4l2_subdev sd;
> >  	struct media_pad pads[CCS_PADS];
> > -	struct v4l2_rect sink_fmt;
> > -	struct v4l2_rect crop[CCS_PADS];
> > -	struct v4l2_rect compose; /* compose on sink */
> >  	unsigned short sink_pad;
> >  	unsigned short source_pad;
> >  	int npads;
> > @@ -220,6 +217,7 @@ struct ccs_sensor {
> >  	u32 mbus_frame_fmts;
> >  	const struct ccs_csi_data_format *csi_format;
> >  	const struct ccs_csi_data_format *internal_csi_format;
> > +	struct v4l2_rect pa_src, scaler_sink, src_src;
> >  	u32 default_mbus_frame_fmts;
> >  	int default_pixel_order;
> >  	struct ccs_data_container sdata, mdata;
> 

-- 
Regards,

Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux