Re: [PATCH RFC v2 03/37] drm/connector: hdmi: Add Broadcast RGB property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 20 Sep 2023 16:35:18 +0200
Maxime Ripard <mripard@xxxxxxxxxx> wrote:

> The i915 driver has a property to force the RGB range of an HDMI output.
> The vc4 driver then implemented the same property with the same
> semantics. KWin has support for it, and a PR for mutter is also there to
> support it.
> 
> Both drivers implementing the same property with the same semantics,
> plus the userspace having support for it, is proof enough that it's
> pretty much a de-facto standard now and we can provide helpers for it.
> 
> Let's plumb it into the newly created HDMI connector.
> 
> Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
> ---
>  Documentation/gpu/kms-properties.csv      |  1 -
>  drivers/gpu/drm/drm_atomic.c              |  5 +++
>  drivers/gpu/drm/drm_atomic_state_helper.c | 17 +++++++
>  drivers/gpu/drm/drm_atomic_uapi.c         |  4 ++
>  drivers/gpu/drm/drm_connector.c           | 74 +++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h               | 39 ++++++++++++++++
>  6 files changed, 139 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv
> index 0f9590834829..caef14c532d4 100644
> --- a/Documentation/gpu/kms-properties.csv
> +++ b/Documentation/gpu/kms-properties.csv
> @@ -17,7 +17,6 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De
>  ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector
>  ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector
>  ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB
> -i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normally in the range 0..1.0 are remapped to the range 16/255..235/255."

Hi,

have a look at this old doc for the property, and...

>  ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD
>  ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD
>  ,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD

...

> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index d9a7e101e4e5..b45471d540ac 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1174,6 +1174,29 @@ static const u32 dp_colorspaces =
>  	BIT(DRM_MODE_COLORIMETRY_BT2020_CYCC) |
>  	BIT(DRM_MODE_COLORIMETRY_BT2020_YCC);
>  
> +static const struct drm_prop_enum_list broadcast_rgb_names[] = {
> +	{ DRM_HDMI_BROADCAST_RGB_AUTO, "Automatic" },
> +	{ DRM_HDMI_BROADCAST_RGB_FULL, "Full" },
> +	{ DRM_HDMI_BROADCAST_RGB_LIMITED, "Limited 16:235" },
> +};
> +
> +/*
> + * drm_hdmi_connector_get_broadcast_rgb_name - Return a string for HDMI connector RGB broadcast selection
> + * @broadcast_rgb: Broadcast RGB selection to compute name of
> + *
> + * Returns: the name of the Broadcast RGB selection, or NULL if the type
> + * is not valid.
> + */
> +const char *
> +drm_hdmi_connector_get_broadcast_rgb_name(enum drm_hdmi_broadcast_rgb broadcast_rgb)
> +{
> +	if (broadcast_rgb > DRM_HDMI_BROADCAST_RGB_LIMITED)
> +		return NULL;
> +
> +	return broadcast_rgb_names[broadcast_rgb].name;
> +}
> +EXPORT_SYMBOL(drm_hdmi_connector_get_broadcast_rgb_name);
> +
>  /**
>   * DOC: standard connector properties
>   *
> @@ -1640,6 +1663,24 @@ EXPORT_SYMBOL(drm_connector_attach_dp_subconnector_property);
>  /**
>   * DOC: HDMI connector properties
>   *
> + * Broadcast RGB (HDMI Specific):
> + *      Indicates the RGB Range (Full vs Limited) used.
> + *
> + *      The value of this property can be one of the following:
> + *
> + *      Automatic:
> + *              RGB Range is selected automatically based on the mode
> + *              according to the HDMI specifications.
> + *
> + *      Full:
> + *              Full RGB Range is forced.
> + *
> + *      Limited 16:235:
> + *              Limited RGB Range is forced.
> + *
> + *      Drivers can set up this property by calling
> + *      drm_connector_attach_broadcast_rgb_property().

...compare it to this. There is one crucial detail lost: setting this
property does two or three things: it clips conversion input values to
[0.0, 1.0] range, programs a conversion matrix to convert full-range
RGB to destination RGB, and sends infoframes to indicate the chosen
destination RGB.

The distinction is important, because use cases like PLUGE calibration
(Rec. ITU-R BT.814-4) rely on indicating limited range while pixel
values are still able to carry sub-black values. Other procedures might
also want to use super-whites. This is impossible with the existing
"Broadcast RGB" property, but that is a different matter.

The old doc didn't exactly say it sets the infoframe fields either, but
I presume it does.

I feel the documentation needs to be much more explicit here.

> + *
>   * content type (HDMI specific):
>   *	Indicates content type setting to be used in HDMI infoframes to indicate
>   *	content type for the external device, so that it adjusts its display
> @@ -2500,6 +2541,39 @@ int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *conn
>  }
>  EXPORT_SYMBOL(drm_connector_attach_hdr_output_metadata_property);
>  
> +/**
> + * drm_connector_attach_broadcast_rgb_property - attach "Broadcast RGB" property
> + * @connector: connector to attach max bpc property on.

"max bpc" pasta.

> + *
> + * This is used to add support for forcing the RGB range on a connector
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_attach_broadcast_rgb_property(struct drm_connector *connector)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_property *prop;
> +
> +	prop = connector->broadcast_rgb_property;
> +	if (!prop) {
> +		prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
> +						"Broadcast RGB",
> +						broadcast_rgb_names,
> +						ARRAY_SIZE(broadcast_rgb_names));
> +		if (!prop)
> +			return -EINVAL;
> +
> +		connector->broadcast_rgb_property = prop;
> +	}
> +
> +	drm_object_attach_property(&connector->base, prop,
> +				   DRM_HDMI_BROADCAST_RGB_AUTO);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_attach_broadcast_rgb_property);
> +
>  /**
>   * drm_connector_attach_colorspace_property - attach "Colorspace" property
>   * @connector: connector to attach the property on.
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 5961f2ad48b1..fdcf64ab91a9 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -368,6 +368,33 @@ enum drm_panel_orientation {
>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +/**
> + * enum drm_hdmi_broadcast_rgb - Broadcast RGB Selection for a @drm_hdmi_connector
> + *
> + * This enum is used to track broadcast RGB selection. There are no
> + * separate #defines for the uapi!

Why the "no separate defines" comment? That's the norm.

The KMS property UAPI works by string names for enum values. Some enum
properties might expose C enums for the values, but that is an
exception that cannot be fixed due to stable UAPI.


Thanks,
pq

> + */
> +enum drm_hdmi_broadcast_rgb {
> +	/**
> +	 * @DRM_HDMI_BROADCAST_RGB_AUTO: The RGB range is selected
> +	 * automatically based on the mode.
> +	 */
> +	DRM_HDMI_BROADCAST_RGB_AUTO,
> +
> +	/**
> +	 * @DRM_HDMI_BROADCAST_RGB_FULL: Full range RGB is forced.
> +	 */
> +	DRM_HDMI_BROADCAST_RGB_FULL,
> +
> +	/**
> +	 * @DRM_HDMI_BROADCAST_RGB_LIMITED: Limited range RGB is forced.
> +	 */
> +	DRM_HDMI_BROADCAST_RGB_LIMITED,
> +};

Attachment: pgpH4e7v1FYVb.pgp
Description: OpenPGP digital signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux