Hans, On 9/19/23 6:23 PM, Hans de Goede wrote: > Hi, > > On 9/4/23 08:12, Bingbu Cao wrote: >> Hans, >> >> On 9/3/23 10:32 PM, Hans de Goede wrote: >>> Hi All, >>> >>> On 9/2/23 16:54, Hans de Goede wrote: >>>> Attached is one more patch which fixes an oops when >>>> using lockdep. >>>> >>>> With both patches applied this is: >>>> >>>> Tested-by: Hans de Goede <hdegoede@xxxxxxxxxx> >>> >>> I withdraw my Tested-by. After a fresh install the driver crashed, >>> messing up the entire machine, due to the firmware not being >>> installed. >>> >>> On missing firmware the driver should simply exit cleanly, not >>> take down the entire machine. >>> >>> Here is a backtrace of the crash: >>> >>> [ 12.549799] intel-ipu6 0000:00:05.0: cpd file name: intel/ipu6ep_fw.bin >>> [ 12.551859] intel-ipu6 0000:00:05.0: Direct firmware load for intel/ipu6ep_fw.bin failed with error -2 >>> [ 12.551876] intel-ipu6 0000:00:05.0: Requesting signed firmware failed >>> [ 12.551880] intel-ipu6: probe of 0000:00:05.0 failed with error -2 >>> [ 12.552112] BUG: kernel NULL pointer dereference, address: 0000000000000490 >>> [ 12.552116] #PF: supervisor read access in kernel mode >>> [ 12.552118] #PF: error_code(0x0000) - not-present page >>> [ 12.552119] PGD 0 P4D 0 >>> [ 12.552121] Oops: 0000 [#1] PREEMPT SMP NOPTI >>> [ 12.552124] CPU: 2 PID: 692 Comm: (udev-worker) Not tainted 6.5.0+ #1 >>> [ 12.552126] Hardware name: LENOVO 21CEZ9Q3US/21CEZ9Q3US, BIOS N3AET72W (1.37 ) 03/02/2023 >>> [ 12.552127] RIP: 0010:ipu6_buttress_isr+0x6d/0x3a0 [intel_ipu6] >>> [ 12.552137] Code: 34 03 00 00 c7 44 24 04 00 00 00 00 41 bc 64 00 00 00 45 31 ed 48 8b 85 50 04 00 00 89 98 9c 00 00 00 45 31 ff 4a 8b 7c fc 08 <4c> 8b b7 90 04 00 00 48 85 ff 74 46 48 83 bf 88 04 00 00 00 74 3c >>> [ 12.552138] RSP: 0018:ffffb5928145fb08 EFLAGS: 00010046 >>> [ 12.552140] RAX: ffffb59289000000 RBX: 0000000000000040 RCX: 0000000000000001 >>> [ 12.552142] RDX: 0000000000000000 RSI: ffff90a2c67a2828 RDI: 0000000000000000 >>> [ 12.552143] RBP: ffff90a2c67a2828 R08: 0000000000000001 R09: 0000000000000001 >>> [ 12.552144] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000064 >>> [ 12.552145] R13: 0000000000000000 R14: ffff90a2c5b79400 R15: 0000000000000000 >>> [ 12.552146] FS: 00007fd5bf725940(0000) GS:ffff90a60f100000(0000) knlGS:0000000000000000 >>> [ 12.552148] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>> [ 12.552150] CR2: 0000000000000490 CR3: 000000010c28c000 CR4: 0000000000750ee0 >>> [ 12.552152] PKRU: 55555554 >>> [ 12.552153] Call Trace: >>> [ 12.552155] <TASK> >>> [ 12.552157] ? __die+0x1f/0x70 >>> [ 12.552162] ? page_fault_oops+0x13d/0x480 >>> [ 12.552167] ? do_user_addr_fault+0x65/0x830 >>> [ 12.552170] ? exc_page_fault+0x36/0x200 >>> [ 12.552174] ? exc_page_fault+0x7b/0x200 >>> [ 12.552176] ? asm_exc_page_fault+0x22/0x30 >>> [ 12.552180] ? ipu6_buttress_isr+0x6d/0x3a0 [intel_ipu6] >>> [ 12.552186] ? _raw_spin_unlock_irqrestore+0x35/0x60 >>> [ 12.552190] free_irq+0x256/0x3a0 >>> [ 12.552194] devres_release_all+0xa5/0xe0 >>> [ 12.552200] device_unbind_cleanup+0xe/0x70 >>> [ 12.552203] really_probe+0x145/0x3e0 >>> [ 12.552206] ? __pfx___driver_attach+0x10/0x10 >>> [ 12.552209] __driver_probe_device+0x78/0x160 >>> [ 12.552212] driver_probe_device+0x1f/0x90 >>> [ 12.552215] __driver_attach+0xd2/0x1c0 >>> [ 12.552218] bus_for_each_dev+0x63/0xa0 >>> [ 12.552221] bus_add_driver+0x115/0x210 >>> [ 12.552223] driver_register+0x55/0x100 >>> [ 12.552226] ? __pfx_ipu6_init+0x10/0x10 [intel_ipu6] >>> [ 12.552234] ipu6_init+0x20/0xff0 [intel_ipu6] >>> [ 12.552241] ? __pfx_ipu6_init+0x10/0x10 [intel_ipu6] >>> [ 12.552247] do_one_initcall+0x5a/0x360 >>> [ 12.552251] ? rcu_is_watching+0xd/0x40 >>> [ 12.552254] ? kmalloc_trace+0xa5/0xb0 >>> [ 12.552258] do_init_module+0x60/0x230 >>> [ 12.552261] init_module_from_file+0x75/0xa0 >>> [ 12.552265] idempotent_init_module+0xf9/0x270 >>> [ 12.552268] ? subflow_v6_conn_request+0xc0/0x120 >>> [ 12.552273] __x64_sys_finit_module+0x5a/0xb0 >>> [ 12.552276] do_syscall_64+0x59/0x90 >>> [ 12.552279] ? do_syscall_64+0x68/0x90 >>> [ 12.552281] ? lockdep_hardirqs_on+0x7d/0x100 >>> [ 12.552283] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 >>> [ 12.552286] RIP: 0033:0x7fd5bff2cb5d >>> [ 12.552288] Code: c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7b 92 0c 00 f7 d8 64 89 01 48 >>> [ 12.552289] RSP: 002b:00007ffc50c03b38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 >>> [ 12.552291] RAX: ffffffffffffffda RBX: 000055e540797f00 RCX: 00007fd5bff2cb5d >>> [ 12.552292] RDX: 0000000000000000 RSI: 00007fd5c052607d RDI: 000000000000000c >>> [ 12.552293] RBP: 00007ffc50c03bf0 R08: 0000000000000000 R09: 00007ffc50c03b80 >>> [ 12.552294] R10: 000000000000000c R11: 0000000000000246 R12: 00007fd5c052607d >>> [ 12.552296] R13: 0000000000020000 R14: 000055e540797030 R15: 000055e540796290 >>> [ 12.552301] </TASK> >>> [ 12.552302] Modules linked in: v4l2_async(+) processor_thermal_rfim industrialio_triggered_buffer ecdh_generic(+) processor_thermal_mbox kfifo_buf videodev snd processor_thermal_rapl intel_skl_int3472_tps68470 intel_ipu6(+) industrialio thunderbolt(+) soundcore tps68470_regulator rfkill mc intel_rapl_common ipu_bridge intel_hid int3403_thermal(+) idma64(+) soc_button_array intel_vsec igen6_edac int340x_thermal_zone clk_tps68470 joydev intel_skl_int3472_discrete sparse_keymap int3400_thermal acpi_thermal_rel acpi_pad acpi_tad loop zram hid_sensor_hub intel_ishtp_hid i915 i2c_algo_bit crct10dif_pclmul drm_buddy crc32_pclmul ttm crc32c_intel drm_display_helper intel_ish_ipc video nvme ghash_clmulni_intel ucsi_acpi wacom hid_multitouch sha512_ssse3 typec_ucsi nvme_core intel_ishtp cec typec i2c_hid_acpi i2c_hid wmi pinctrl_tigerlake serio_raw ip6_tables ip_tables fuse >>> [ 12.552348] CR2: 0000000000000490 >>> [ 12.552351] ---[ end trace 0000000000000000 ]--- >>> [ 12.552352] RIP: 0010:ipu6_buttress_isr+0x6d/0x3a0 [intel_ipu6] >>> [ 12.552361] Code: 34 03 00 00 c7 44 24 04 00 00 00 00 41 bc 64 00 00 00 45 31 ed 48 8b 85 50 04 00 00 89 98 9c 00 00 00 45 31 ff 4a 8b 7c fc 08 <4c> 8b b7 90 04 00 00 48 85 ff 74 46 48 83 bf 88 04 00 00 00 74 3c >>> [ 12.552363] RSP: 0018:ffffb5928145fb08 EFLAGS: 00010046 >>> [ 12.552365] RAX: ffffb59289000000 RBX: 0000000000000040 RCX: 0000000000000001 >>> [ 12.552366] RDX: 0000000000000000 RSI: ffff90a2c67a2828 RDI: 0000000000000000 >>> [ 12.552367] RBP: ffff90a2c67a2828 R08: 0000000000000001 R09: 0000000000000001 >>> [ 12.552368] R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000064 >>> [ 12.552369] R13: 0000000000000000 R14: ffff90a2c5b79400 R15: 0000000000000000 >>> [ 12.552370] FS: 00007fd5bf725940(0000) GS:ffff90a60f100000(0000) knlGS:0000000000000000 >>> [ 12.552371] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>> [ 12.552372] CR2: 0000000000000490 CR3: 000000010c28c000 CR4: 0000000000750ee0 >>> [ 12.552373] PKRU: 55555554 >>> >>> Please fix this for the next version. Reproducing this is easy, just remove the firmware file from under /lib/firmware/intel . >> >> Unfortunately, I did not reproduce this problem on my machine. > > Ok. > >> The interrupt >> should not be triggered until buttress authentication if need. >> So could you help try to move the devm_request_threaded_irq() block before >> >> ret = ipu6_buttress_authenticate(isp); >> >> to check what will happen? > > I'm not sure how that will help. You really should not rely on the hw not triggering an IRQ until a cerain point in time, instead you should modify the driver so that the IRQ is only registered once everything has been fully setup and the IRQ handler can safely run, since the IRQ handler can run as soon as you call request_irq(). E.g. the hw might be un an unexpected state causing the hw to immediately trigger the IRQ, which seems to be what happened during my testing. > > Since I hit this when firmware loading failed, IMHO the request_irq() should be moved to after loading the fw. I really don't see how registering the IRQ before loading the fw is ready is useful. HW should not trigger any buttress IRQ until firmware authentication. So I think it make sense to move the request_irq before buttress_authenticate(). So the unexpected IRQ is not related to firmware load, firmware is not ready before authentication, so there is no big difference between moving after firmware load and before authentication. > > Regards, > > Hans > > -- Best regards, Bingbu Cao
