Hi Sakari,
Thank you for the patch.
On Mon, Sep 18, 2023 at 03:51:33PM +0300, Sakari Ailus wrote:
> Enable runtime PM before registering the async subdev as the driver UAPI
> may become accessible immediately after the registration. Runtime PM needs
> to be enabled by that time.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ov2740.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
> index 41d4f85470fd..319dc00e47b4 100644
> --- a/drivers/media/i2c/ov2740.c
> +++ b/drivers/media/i2c/ov2740.c
> @@ -1172,6 +1172,12 @@ static int ov2740_probe(struct i2c_client *client)
> goto probe_error_v4l2_ctrl_handler_free;
> }
>
> + /* Set the device's state to active if it's in D0 state. */
> + if (full_power)
> + pm_runtime_set_active(&client->dev);
> + pm_runtime_enable(&client->dev);
> + pm_runtime_idle(&client->dev);
> +
> ret = v4l2_async_register_subdev_sensor(&ov2740->sd);
> if (ret < 0) {
> dev_err_probe(dev, ret, "failed to register V4L2 subdev\n");
> @@ -1182,16 +1188,12 @@ static int ov2740_probe(struct i2c_client *client)
> if (ret)
> dev_warn(&client->dev, "register nvmem failed, ret %d\n", ret);
>
> - /* Set the device's state to active if it's in D0 state. */
> - if (full_power)
> - pm_runtime_set_active(&client->dev);
> - pm_runtime_enable(&client->dev);
> - pm_runtime_idle(&client->dev);
> -
> return 0;
>
> probe_error_media_entity_cleanup:
> media_entity_cleanup(&ov2740->sd.entity);
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
>
> probe_error_v4l2_ctrl_handler_free:
> v4l2_ctrl_handler_free(ov2740->sd.ctrl_handler);
--
Regards,
Laurent Pinchart
