Hi Jacopo Mondi,
Thanks for the feedback.
> Subject: Re: [PATCH 1/2] media: mt9p031: Extend match support for OF tables
>
> Hi Biju
>
> On Sun, Sep 10, 2023 at 05:01:25PM +0100, Biju Das wrote:
> > The driver has an OF match table, still, it uses an ID lookup table
> > for retrieving match data. Currently, the driver is working on the
> > assumption that an I2C device registered via OF will always match a
> > legacy I2C device ID. The correct approach is to have an OF device ID
> > table using i2c_get_match_data() if the devices are registered via OF/ID.
> >
> > Unify the OF/ID table by using MEDIA_BUS_FMT as match data for both
> > these tables and replace the ID lookup table for the match data by
> > i2c_get_match_data() and simplifly probe() and mt9p031_init_cfg()
> >
> > Drop mt9p031_init_cfg as there is no user.
> >
> > While at it, remove the trailing comma in the terminator entry for the
> > OF table making code robust against (theoretical) misrebases or other
> > similar things where the new entry goes _after_ the termination
> > without the compiler noticing.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > drivers/media/i2c/mt9p031.c | 33 +++++++++++----------------------
> > 1 file changed, 11 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
> > index 348f1e1098fb..540cb519915c 100644
> > --- a/drivers/media/i2c/mt9p031.c
> > +++ b/drivers/media/i2c/mt9p031.c
> > @@ -112,11 +112,6 @@
> > #define MT9P031_TEST_PATTERN_RED 0xa2
> > #define MT9P031_TEST_PATTERN_BLUE 0xa3
> >
> > -enum mt9p031_model {
> > - MT9P031_MODEL_COLOR,
> > - MT9P031_MODEL_MONOCHROME,
> > -};
> > -
> > struct mt9p031 {
> > struct v4l2_subdev subdev;
> > struct media_pad pad;
> > @@ -129,7 +124,7 @@ struct mt9p031 {
> > struct clk *clk;
> > struct regulator_bulk_data regulators[3];
> >
> > - enum mt9p031_model model;
> > + u32 code;
> > struct aptina_pll pll;
> > unsigned int clk_div;
> > bool use_pll;
> > @@ -714,12 +709,7 @@ static int mt9p031_init_cfg(struct v4l2_subdev
> *subdev,
> > crop->height = MT9P031_WINDOW_HEIGHT_DEF;
> >
> > format = __mt9p031_get_pad_format(mt9p031, sd_state, 0, which);
> > -
> > - if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
> > - format->code = MEDIA_BUS_FMT_Y12_1X12;
> > - else
> > - format->code = MEDIA_BUS_FMT_SGRBG12_1X12;
> > -
> > + format->code = mt9p031->code;
> > format->width = MT9P031_WINDOW_WIDTH_DEF;
> > format->height = MT9P031_WINDOW_HEIGHT_DEF;
> > format->field = V4L2_FIELD_NONE;
> > @@ -1104,7 +1094,6 @@ mt9p031_get_pdata(struct i2c_client *client)
> >
> > static int mt9p031_probe(struct i2c_client *client) {
> > - const struct i2c_device_id *did = i2c_client_get_device_id(client);
> > struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client);
> > struct i2c_adapter *adapter = client->adapter;
> > struct mt9p031 *mt9p031;
> > @@ -1129,7 +1118,7 @@ static int mt9p031_probe(struct i2c_client *client)
> > mt9p031->pdata = pdata;
> > mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF;
> > mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC;
> > - mt9p031->model = did->driver_data;
> > + mt9p031->code = (uintptr_t)i2c_get_match_data(client);
> >
> > mt9p031->regulators[0].supply = "vdd";
> > mt9p031->regulators[1].supply = "vdd_io";
> > @@ -1226,19 +1215,19 @@ static void mt9p031_remove(struct i2c_client
> *client)
> > }
> >
> > static const struct i2c_device_id mt9p031_id[] = {
> > - { "mt9p006", MT9P031_MODEL_COLOR },
> > - { "mt9p031", MT9P031_MODEL_COLOR },
> > - { "mt9p031m", MT9P031_MODEL_MONOCHROME },
> > - { }
> > + { "mt9p006", MEDIA_BUS_FMT_SGRBG12_1X12 },
> > + { "mt9p031", MEDIA_BUS_FMT_SGRBG12_1X12 },
> > + { "mt9p031m", MEDIA_BUS_FMT_Y12_1X12 },
> > + { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(i2c, mt9p031_id);
> >
> > #if IS_ENABLED(CONFIG_OF)
> > static const struct of_device_id mt9p031_of_match[] = {
> > - { .compatible = "aptina,mt9p006", },
> > - { .compatible = "aptina,mt9p031", },
> > - { .compatible = "aptina,mt9p031m", },
> > - { /* sentinel */ },
> > + { .compatible = "aptina,mt9p006", .data = (void
> *)MEDIA_BUS_FMT_SGRBG12_1X12 },
> > + { .compatible = "aptina,mt9p031", .data = (void
> *)MEDIA_BUS_FMT_SGRBG12_1X12 },
> > + { .compatible = "aptina,mt9p031m", .data = (void
> *)MEDIA_BUS_FMT_Y12_1X12 },
> > + { /* sentinel */ }
>
> I know it might sound not necessary, but isn't it better to wrap the
> format in some sort of per-model structure. It would avoid a few type
> casts too. Up to you though
The problem with structure is, it will have one
variable entry. I got some feedback related to similar
patches not to add a single variable to structure
and use the value directly instead.
Cheers,
Biju
>
> > };
> > MODULE_DEVICE_TABLE(of, mt9p031_of_match);
> > #endif
> > --
> > 2.25.1
> >
