Re: [PATCH v3 1/5] dt-bindings: media: add bindings for stm32 dcmipp

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

Hi Alain,

Thank you for the patch.

On Fri, Sep 01, 2023 at 05:57:20PM +0200, Alain Volmat wrote:
> Add the yaml binding for the ST Microelectronics STM32 DCMIPP
> (Digital Camera Memory Interface Pixel Processor)
> 
> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
>  .../bindings/media/st,stm32-dcmipp.yaml       | 89 +++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
> new file mode 100644
> index 000000000000..87731f3ce7bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
> @@ -0,0 +1,89 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor
> +
> +maintainers:
> +  - Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> +  - Alain Volmat <alain.volmat@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: st,stm32mp13-dcmipp
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    unevaluatedProperties: false
> +    description:
> +      DCMIPP supports a single port node with parallel bus.
> +
> +    properties:
> +      endpoint:
> +        $ref: video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          bus-type:
> +            enum: [5, 6]
> +            default: 5
> +
> +          bus-width:
> +            enum: [8, 10, 12, 14]
> +            default: 8
> +
> +          pclk-sample: true
> +          hsync-active: true
> +          vsync-active: true
> +
> +        required:
> +          - pclk-sample
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - resets
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp13-clks.h>
> +    #include <dt-bindings/reset/stm32mp13-resets.h>
> +    dcmipp@5a000000 {
> +        compatible = "st,stm32mp13-dcmipp";
> +        reg = <0x5a000000 0x400>;
> +        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +        resets = <&rcc DCMIPP_R>;
> +        clocks = <&rcc DCMIPP_K>;
> +
> +        port {
> +             endpoint {
> +                   remote-endpoint = <&mipid02_2>;
> +                   bus-width = <8>;
> +                   hsync-active = <0>;
> +                   vsync-active = <0>;
> +                   pclk-sample = <0>;
> +             };
> +        };
> +    };
> +
> +...

-- 
Regards,

Laurent Pinchart