On Tue, Aug 15, 2023 at 01:31:55PM +0000, Sakari Ailus wrote:
> On Tue, Aug 15, 2023 at 04:15:39PM +0300, Laurent Pinchart wrote:
> > On Tue, Jun 27, 2023 at 02:51:06PM +0200, Hans de Goede wrote:
> > > Use the new comon CCI register access helpers to replace the private
> > > register access helpers in the imx290 driver.
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > > ---
> > > Note:
> > > 1. This is untested
> > > 2. For reviewers: all the IMX290_REG_?BIT defines in both the register
> > > address defines as well as in various reg-sequences were automatically
> > > changed using search replace.
> > > ---
> > > Changes in v3:
> > > - Fixed a couple of lines > 80 chars
> > >
> > > Changes in v2:
> > > - New patch in v2 of this series
> > > ---
> > > drivers/media/i2c/Kconfig | 1 +
> > > drivers/media/i2c/imx290.c | 360 +++++++++++++++----------------------
> > > 2 files changed, 150 insertions(+), 211 deletions(-)
> >
> > [snip]
> >
> > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > > index b3f832e9d7e1..e78c7b91ae72 100644
> > > --- a/drivers/media/i2c/imx290.c
> > > +++ b/drivers/media/i2c/imx290.c
> > > @@ -21,91 +21,86 @@
> >
> > [snip]
> >
> > > @@ -615,63 +605,15 @@ imx290_format_info(const struct imx290 *imx290, u32 code)
> > > return NULL;
> > > }
> > >
> > > -/* -----------------------------------------------------------------------------
> > > - * Register access
> > > - */
> > > -
> > > -static int __always_unused imx290_read(struct imx290 *imx290, u32 addr, u32 *value)
> > > -{
> > > - u8 data[3] = { 0, 0, 0 };
> > > - int ret;
> > > -
> > > - ret = regmap_raw_read(imx290->regmap, addr & IMX290_REG_ADDR_MASK,
> > > - data, (addr >> IMX290_REG_SIZE_SHIFT) & 3);
> > > - if (ret < 0) {
> > > - dev_err(imx290->dev, "%u-bit read from 0x%04x failed: %d\n",
> > > - ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
> > > - addr & IMX290_REG_ADDR_MASK, ret);
> > > - return ret;
> > > - }
> > > -
> > > - *value = get_unaligned_le24(data);
> > > - return 0;
> > > -}
> > > -
> > > -static int imx290_write(struct imx290 *imx290, u32 addr, u32 value, int *err)
> > > -{
> > > - u8 data[3];
> > > - int ret;
> > > -
> > > - if (err && *err)
> > > - return *err;
> > > -
> > > - put_unaligned_le24(value, data);
> >
> > We seem to be having a problem here, as the CCI helpers unconditionally
> > use big endian for the data :-(
>
> Well spotted. This driver needs to address this.
>
> It's a hardware issue though. It's the only sensor ever I've seen to have
> little endian registers.
I'm not sure I would call that a hardware issue. It may be a peculiarity
of this sensor, but is it really the only one ?
How would you like to see this addressed ? We could add CCI_REG*_LE
macros, but I'm not sure to like that. Setting a flag at init time would
be nicer, but there's nowhere to store it.
> > > -
> > > - ret = regmap_raw_write(imx290->regmap, addr & IMX290_REG_ADDR_MASK,
> > > - data, (addr >> IMX290_REG_SIZE_SHIFT) & 3);
> > > - if (ret < 0) {
> > > - dev_err(imx290->dev, "%u-bit write to 0x%04x failed: %d\n",
> > > - ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
> > > - addr & IMX290_REG_ADDR_MASK, ret);
> > > - if (err)
> > > - *err = ret;
> > > - }
> > > -
> > > - return ret;
> > > -}
> > > -
> >
> > [snip]
--
Regards,
Laurent Pinchart
