Add generic serial metadata mbus formats. These formats describe data width and packing but not the content itself. The reason for specifying such formats is that the formats as such are fairly device specific but they are still handled by CSI-2 receiver drivers that should not be aware of device specific formats. What makes generic metadata formats possible is that these formats are parsed by software only, after capturing the data to system memory. Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> --- .../userspace-api/media/v4l/dev-subdev.rst | 8 +- .../media/v4l/subdev-formats.rst | 257 ++++++++++++++++++ include/uapi/linux/media-bus-format.h | 9 + 3 files changed, 270 insertions(+), 4 deletions(-) diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index 0e3ca6d6d81f..8197100663b9 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -639,8 +639,8 @@ modeled as V4L2 devices, exposed to userspace via /dev/videoX nodes. To configure this pipeline, the userspace must take the following steps: 1) Set up media links between entities: connect the sensors to the bridge, -bridge to the receiver, and the receiver to the DMA engines. This step does -not differ from normal non-multiplexed media controller setup. + bridge to the receiver, and the receiver to the DMA engines. This step does + not differ from normal non-multiplexed media controller setup. 2) Configure routing @@ -715,8 +715,8 @@ modeled as V4L2 devices, exposed to userspace via /dev/videoX nodes. To configure this pipeline, the userspace must take the following steps: 1) Set up media links between entities: connect the sensors to the bridge, -bridge to the receiver, and the receiver to the DMA engines. This step does -not differ from normal non-multiplexed media controller setup. + bridge to the receiver, and the receiver to the DMA engines. This step does + not differ from normal non-multiplexed media controller setup. 2) Configure routing diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index a3a35eeed708..c615da08502d 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -8234,3 +8234,260 @@ The following table lists the existing metadata formats. both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. Width and height will be set to 0 for this format. + +Generic Serial Metadata Formats +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Generic serial metadata formats are used on serial busses where the actual data +content is more or less device specific but the data is transmitted and received +by multiple devices that do not process the data in any way, simply writing +it to system memory for processing in software at the end of the pipeline. + +The more specific variant describing the actual data is used on the internal +source pad of the originating sub-device. + +"b" in an array cell signifies a byte of data, followed by the number of byte +and finally the bit number in subscript. "p" indicates a padding bit. + +.. _media-bus-format-generic-meta: + +.. cssclass: longtable + +.. flat-table:: Generic Serial Metadata Formats + :header-rows: 2 + :stub-columns: 0 + + * - Identifier + - Code + - + - :cspan:`23` Data organization + * - + - + - Bit + - 23 + - 22 + - 21 + - 20 + - 19 + - 18 + - 17 + - 16 + - 15 + - 14 + - 13 + - 12 + - 11 + - 10 + - 9 + - 8 + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + * .. _MEDIA-BUS-FMT-META-8: + + - MEDIA_BUS_FMT_META_8 + - 0x8001 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + * .. _MEDIA-BUS-FMT-META-10: + + - MEDIA_BUS_FMT_META_10 + - 0x8002 + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + * .. _MEDIA-BUS-FMT-META-12: + + - MEDIA_BUS_FMT_META_12 + - 0x8003 + - + - + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + - p + - p + * .. _MEDIA-BUS-FMT-META-14: + + - MEDIA_BUS_FMT_META_14 + - 0x8004 + - + - + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + - p + - p + - p + - p + * .. _MEDIA-BUS-FMT-META-16: + + - MEDIA_BUS_FMT_META_16 + - 0x8005 + - + - + - + - + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + - p + - p + - p + - p + - p + - p + * .. _MEDIA-BUS-FMT-META-20: + + - MEDIA_BUS_FMT_META_20 + - 0x8007 + - + - + - + - + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + * .. _MEDIA-BUS-FMT-META-24: + + - MEDIA_BUS_FMT_META_24 + - 0x8009 + - + - b0\ :sub:`7` + - b0\ :sub:`6` + - b0\ :sub:`5` + - b0\ :sub:`4` + - b0\ :sub:`3` + - b0\ :sub:`2` + - b0\ :sub:`1` + - b0\ :sub:`0` + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p + - p diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index a03c543cb072..9ee031397372 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -173,4 +173,13 @@ */ #define MEDIA_BUS_FMT_METADATA_FIXED 0x7001 +/* Generic line based metadata formats for serial buses. Next is 0x8008. */ +#define MEDIA_BUS_FMT_META_8 0x8001 +#define MEDIA_BUS_FMT_META_10 0x8002 +#define MEDIA_BUS_FMT_META_12 0x8003 +#define MEDIA_BUS_FMT_META_14 0x8004 +#define MEDIA_BUS_FMT_META_16 0x8005 +#define MEDIA_BUS_FMT_META_20 0x8006 +#define MEDIA_BUS_FMT_META_24 0x8007 + #endif /* __LINUX_MEDIA_BUS_FORMAT_H */ -- 2.39.2
