From: Pratyush Yadav <p.yadav@xxxxxx>
This resets the stream state machines and FIFOs, giving them a clean
slate. On J721E if the streams are not reset before starting the
capture, the captured frame gets wrapped around vertically on every run
after the first.
Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
v7->v8: No change
drivers/media/platform/cadence/cdns-csi2rx.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 2a80c66fb547..30cdc260b46a 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -40,6 +40,7 @@
#define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100)
#define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000)
+#define CSI2RX_STREAM_CTRL_SOFT_RST BIT(4)
#define CSI2RX_STREAM_CTRL_START BIT(0)
#define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
@@ -138,12 +139,22 @@ struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
static void csi2rx_reset(struct csi2rx_priv *csi2rx)
{
+ unsigned int i;
+
writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT,
csi2rx->base + CSI2RX_SOFT_RESET_REG);
udelay(10);
writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
+
+ /* Reset individual streams. */
+ for (i = 0; i < csi2rx->max_streams; i++) {
+ writel(CSI2RX_STREAM_CTRL_SOFT_RST,
+ csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
+ usleep_range(10, 20);
+ writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
+ }
}
static int csi2rx_configure_ext_dphy(struct csi2rx_priv *csi2rx)
--
2.41.0
