Re: [PATCH 2/2] media: v4l2-mem2mem: add a list for buf used by hw

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit :
> On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@xxxxxxxxxxxx> wrote:
> > 
> > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit :
> > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote:
> > > > From: "Hsia-Jun(Randy) Li" <randy.li@xxxxxxxxxxxxx>
> > > > 
> > > > Many drivers have to create its own buf_struct for a
> > > > vb2_queue to track such a state. Also driver has to
> > > > iterate over rdy_queue every times to find out a buffer
> > > > which is not sent to hardware(or firmware), this new
> > > > list just offers the driver a place to store the buffer
> > > > that hardware(firmware) has acknowledged.
> > > > 
> > > > One important advance about this list, it doesn't like
> > > > rdy_queue which both bottom half of the user calling
> > > > could operate it, while the v4l2 worker would as well.
> > > > The v4l2 core could only operate this queue when its
> > > > v4l2_context is not running, the driver would only
> > > > access this new hw_queue in its own worker.
> > > 
> > > Could you describe in what case such a list would be useful for a
> > > mem2mem driver?
> > 
> > Today all driver must track buffers that are "owned by the hardware". This is a
> > concept dictated by the m2m framework and enforced through the ACTIVE flag. All
> > buffers from this list must be mark as done/error/queued after streamoff of the
> > respective queue in order to acknowledge that they are no longer in use by the
> > HW. Not doing so will warn:
> > 
> >   videobuf2_common: driver bug: stop_streaming operation is leaving buf ...
> > 
> > Though, there is no queue to easily iterate them. All driver endup having their
> > own queue, or just leaving the buffers in the rdy_queue (which isn't better).
> > 
> 
> Thanks for the explanation. I see how it could be useful now.
> 
> Although I guess this is a problem specifically for hardware (or
> firmware) which can internally queue more than 1 buffer, right?
> Otherwise the current buffer could just stay at the top of the
> rdy_queue until it's removed by the driver's completion handler,
> timeout/error handler or context destruction.

Correct, its only an issue when you need to process multiple src buffers before
producing a dst buffer. If affects stateful decoder, stateful encoders and
deinterlacer as far as I'm aware.

Nicolas

> 
> Best regards,
> Tomasz
> 
> > Nicolas
> > > 
> > > > 
> > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@xxxxxxxxxxxxx>
> > > > ---
> > > >  drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++--------
> > > >  include/media/v4l2-mem2mem.h           | 10 +++++++++-
> > > >  2 files changed, 26 insertions(+), 9 deletions(-)
> > > > 
> > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
> > > > index c771aba42015..b4151147d5bd 100644
> > > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c
> > > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
> > > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev,
> > > >             goto job_unlock;
> > > >     }
> > > > 
> > > > -   src = v4l2_m2m_next_src_buf(m2m_ctx);
> > > > -   dst = v4l2_m2m_next_dst_buf(m2m_ctx);
> > > > -   if (!src && !m2m_ctx->out_q_ctx.buffered) {
> > > > -           dprintk("No input buffers available\n");
> > > > -           goto job_unlock;
> > > > +   if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) {
> > > > +           src = v4l2_m2m_next_src_buf(m2m_ctx);
> > > > +
> > > > +           if (!src && !m2m_ctx->out_q_ctx.buffered) {
> > > > +                   dprintk("No input buffers available\n");
> > > > +                   goto job_unlock;
> > > > +           }
> > > >     }
> > > > -   if (!dst && !m2m_ctx->cap_q_ctx.buffered) {
> > > > -           dprintk("No output buffers available\n");
> > > > -           goto job_unlock;
> > > > +
> > > > +   if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) {
> > > > +           dst = v4l2_m2m_next_dst_buf(m2m_ctx);
> > > > +           if (!dst && !m2m_ctx->cap_q_ctx.buffered) {
> > > > +                   dprintk("No output buffers available\n");
> > > > +                   goto job_unlock;
> > > > +           }
> > > >     }
> > > 
> > > src and dst would be referenced unitialized below if neither of the
> > > above ifs hits...
> > > 
> > > Best regards,
> > > Tomasz
> > > 
> > > > 
> > > >     m2m_ctx->new_frame = true;
> > > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
> > > >     INIT_LIST_HEAD(&q_ctx->rdy_queue);
> > > >     q_ctx->num_rdy = 0;
> > > >     spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags);
> > > > +   INIT_LIST_HEAD(&q_ctx->hw_queue);
> > > > 
> > > >     if (m2m_dev->curr_ctx == m2m_ctx) {
> > > >             m2m_dev->curr_ctx = NULL;
> > > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev,
> > > > 
> > > >     INIT_LIST_HEAD(&out_q_ctx->rdy_queue);
> > > >     INIT_LIST_HEAD(&cap_q_ctx->rdy_queue);
> > > > +   INIT_LIST_HEAD(&out_q_ctx->hw_queue);
> > > > +   INIT_LIST_HEAD(&cap_q_ctx->hw_queue);
> > > >     spin_lock_init(&out_q_ctx->rdy_spinlock);
> > > >     spin_lock_init(&cap_q_ctx->rdy_spinlock);
> > > > 
> > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
> > > > index d6c8eb2b5201..2342656e582d 100644
> > > > --- a/include/media/v4l2-mem2mem.h
> > > > +++ b/include/media/v4l2-mem2mem.h
> > > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev;
> > > >   * processed
> > > >   *
> > > >   * @q:             pointer to struct &vb2_queue
> > > > - * @rdy_queue:     List of V4L2 mem-to-mem queues
> > > > + * @rdy_queue:     List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is
> > > > + *         called in struct vb2_ops->buf_queue(), the buffer enqueued
> > > > + *         by user would be added to this list.
> > > >   * @rdy_spinlock: spin lock to protect the struct usage
> > > >   * @num_rdy:       number of buffers ready to be processed
> > > > + * @hw_queue:      A list for tracking the buffer is occupied by the hardware
> > > > + *                 (or device's firmware). A buffer could only be in either
> > > > + *                 this list or @rdy_queue.
> > > > + *                 Driver may choose not to use this list while uses its own
> > > > + *                 private data to do this work.
> > > >   * @buffered:      is the queue buffered?
> > > >   *
> > > >   * Queue for buffers ready to be processed as soon as this
> > > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx {
> > > >     struct list_head        rdy_queue;
> > > >     spinlock_t              rdy_spinlock;
> > > >     u8                      num_rdy;
> > > > +   struct list_head        hw_queue;
> > > >     bool                    buffered;
> > > >  };
> > > > 
> > > > --
> > > > 2.17.1
> > > > 
> > 





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux