Hi Tomi,
Thank you for the patch.
On Thu, Jul 20, 2023 at 01:30:39PM +0300, Tomi Valkeinen wrote:
> FPD-Link has an operating mode that used to be called "asynchronous" in
> the hardware documentation, but that has been changed to non-synchronous
> already quite a while back. The ub960 driver still had one instance of
> the old naming, so let's rename it.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ds90ub960.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
> index ea819fb6e99b..2ed4d4763a02 100644
> --- a/drivers/media/i2c/ds90ub960.c
> +++ b/drivers/media/i2c/ds90ub960.c
> @@ -415,8 +415,8 @@ enum ub960_rxport_mode {
> RXPORT_MODE_RAW12_HF = 1,
> RXPORT_MODE_RAW12_LF = 2,
> RXPORT_MODE_CSI2_SYNC = 3,
> - RXPORT_MODE_CSI2_ASYNC = 4,
> - RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC,
> + RXPORT_MODE_CSI2_NONSYNC = 4,
> + RXPORT_MODE_LAST = RXPORT_MODE_CSI2_NONSYNC,
> };
>
> enum ub960_rxport_cdr {
> @@ -1609,7 +1609,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv,
> div = 1;
> break;
>
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> mult = 2;
> div = 5;
> break;
> @@ -1633,7 +1633,7 @@ static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv,
> case RXPORT_MODE_CSI2_SYNC:
> return 47187500;
>
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> return 9437500;
>
> default:
> @@ -1840,7 +1840,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv,
> bc_freq_val = 0;
> break;
>
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> bc_freq_val = 2;
> break;
>
> @@ -1878,7 +1878,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv,
> return;
>
> case RXPORT_MODE_CSI2_SYNC:
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> /* CSI-2 Mode (DS90UB953-Q1 compatible) */
> ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3,
> 0x0);
> @@ -1938,7 +1938,7 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv,
> fpd_func_mode = 2;
> break;
>
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> bc_freq_val = 2;
> fpd_func_mode = 2;
> break;
> @@ -2032,7 +2032,7 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv,
> bc_freq_val = 6;
> break;
>
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> bc_freq_val = 2;
> break;
>
> @@ -2098,7 +2098,7 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv,
> return;
>
> case RXPORT_MODE_CSI2_SYNC:
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
>
> break;
> }
> @@ -2444,7 +2444,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
>
> /* For the rest, we are only interested in parallel busses */
> if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC ||
> - rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC)
> + rxport->rx_mode == RXPORT_MODE_CSI2_NONSYNC)
> continue;
>
> if (rx_data[nport].num_streams > 2)
> @@ -2508,7 +2508,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv,
> break;
>
> case RXPORT_MODE_CSI2_SYNC:
> - case RXPORT_MODE_CSI2_ASYNC:
> + case RXPORT_MODE_CSI2_NONSYNC:
> if (!priv->hw_data->is_ub9702) {
> /* Map all VCs from this port to the same VC */
> ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP,
>
--
Regards,
Laurent Pinchart
