Hi Tomi,
Thank you for the patch.
On Thu, Jul 20, 2023 at 01:30:33PM +0300, Tomi Valkeinen wrote:
> Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/ds90ub953.c | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
> index 591b52bf71c2..ad964bd6c7eb 100644
> --- a/drivers/media/i2c/ds90ub953.c
> +++ b/drivers/media/i2c/ds90ub953.c
> @@ -25,6 +25,8 @@
> #include <media/i2c/ds90ub9xx.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-mediabus.h>
> #include <media/v4l2-subdev.h>
>
> #define UB953_PAD_SINK 0
> @@ -1111,7 +1113,9 @@ static const struct regmap_config ub953_regmap_config = {
> static int ub953_parse_dt(struct ub953_data *priv)
> {
> struct device *dev = &priv->client->dev;
> + struct v4l2_fwnode_endpoint vep = {};
> struct fwnode_handle *ep_fwnode;
> + unsigned char nlanes;
> int ret;
>
> ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev),
> @@ -1119,19 +1123,21 @@ static int ub953_parse_dt(struct ub953_data *priv)
> if (!ep_fwnode)
> return dev_err_probe(dev, -ENOENT, "no endpoint found\n");
>
> - ret = fwnode_property_count_u32(ep_fwnode, "data-lanes");
> + vep.bus_type = V4L2_MBUS_CSI2_DPHY;
I would initialize .bus_type when declaring the variable.
> + ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep);
>
> fwnode_handle_put(ep_fwnode);
>
> - if (ret < 0)
> + if (ret)
> return dev_err_probe(dev, ret,
> - "failed to parse property 'data-lanes'\n");
> + "failed to parse sink endpoint data\n");
>
> - if (ret != 1 && ret != 2 && ret != 4)
> + nlanes = vep.bus.mipi_csi2.num_data_lanes;
> + if (nlanes != 1 && nlanes != 2 && nlanes != 4)
> return dev_err_probe(dev, -EINVAL,
> - "bad number of data-lanes: %d\n", ret);
> + "bad number of data-lanes: %d\n", nlanes);
%u as nlanes is now unsigned.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> - priv->num_data_lanes = ret;
> + priv->num_data_lanes = nlanes;
>
> return 0;
> }
>
--
Regards,
Laurent Pinchart
