Re: [PATCH v3 04/11] media: videobuf2: Stop define VB2_MAX_FRAME as global

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Le 03/07/2023 à 10:35, Hsia-Jun Li a écrit :

On 7/3/23 16:09, Benjamin Gaignard wrote:
CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe.


Le 30/06/2023 à 11:51, Hsia-Jun Li a écrit :

On 6/22/23 21:13, Benjamin Gaignard wrote:
CAUTION: Email originated externally, do not click links or open
attachments unless you recognize the sender and know the content is
safe.


After changing bufs arrays to a dynamic allocated array
VB2_MAX_FRAME doesn't mean anything for videobuf2 core.

I think make it 64 which is the VB2_MAX_FRAME in Android GKI kernel is
more reasonable.

It would be hard to iterate the whole array, it would go worse with a
filter. Such iterate may need to go twice because you mix
post-processing buffer and decoding buffer(with MV) in the same array.

Here I don't want to change drivers behavior so I keep the same value.
If it happens that they need more buffers, like for dynamic resolution change feature for Verisilicon VP9 decoder, case by case patches will be needed.

I just don't like the idea that using a variant length array here.

As far I have understand Hans and/or Laurent were happy to use that but I may have misunderstood them.


And I could explain why you won't need so many buffers for the performance of decoding.

VP9 could support 10 reference frames in dpb.

Even for those frequent resolution changing test set, it would only happen to two resolutions,

32 would be enough for 20 buffers of two resolution plus golden frames. It also leaves enough slots for re-order latency.

If your case had more two resolutions, likes low->medium->high.

VP9 header doesn't tell you that video resolution will change and in which way.
It cloud be from factor x1/2 to x16 and multiple time so you can use lot of (too much) buffers.


I would suggest just skip the medium resolutions, just allocate the lower one first for fast playback then the highest for all the possible

medium cases. Reallocation happens frequently would only cause memory fragment, nothing benefits your performance.



Remove it from the core definitions but keep it for drivers internal
needs.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxxxxx>
---
  drivers/media/common/videobuf2/videobuf2-core.c | 2 ++
  drivers/media/platform/amphion/vdec.c | 1 +
.../media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c | 2 ++
  drivers/media/platform/qcom/venus/hfi.h | 2 ++
  drivers/media/platform/verisilicon/hantro_hw.h | 2 ++
  drivers/staging/media/ipu3/ipu3-v4l2.c | 2 ++
  include/media/videobuf2-core.h | 1 -
  include/media/videobuf2-v4l2.h | 4 ----
  8 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/media/common/videobuf2/videobuf2-core.c
b/drivers/media/common/videobuf2/videobuf2-core.c
index 86e1e926fa45..899783f67580 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -31,6 +31,8 @@

  #include <trace/events/vb2.h>

+#define VB2_MAX_FRAME  32
+
  static int debug;
  module_param(debug, int, 0644);

diff --git a/drivers/media/platform/amphion/vdec.c
b/drivers/media/platform/amphion/vdec.c
index 3fa1a74a2e20..b3219f6d17fa 100644
--- a/drivers/media/platform/amphion/vdec.c
+++ b/drivers/media/platform/amphion/vdec.c
@@ -28,6 +28,7 @@

  #define VDEC_MIN_BUFFER_CAP            8
  #define VDEC_MIN_BUFFER_OUT            8
+#define VB2_MAX_FRAME                  32

  struct vdec_fs_info {
         char name[8];
diff --git
a/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
b/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
index 6532a69f1fa8..a1e0f24bb91c 100644
--- a/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c +++ b/drivers/media/platform/mediatek/vcodec/vdec/vdec_vp9_req_lat_if.c
@@ -16,6 +16,8 @@
  #include "../vdec_drv_if.h"
  #include "../vdec_vpu_if.h"

+#define VB2_MAX_FRAME  32
+
  /* reset_frame_context defined in VP9 spec */
  #define VP9_RESET_FRAME_CONTEXT_NONE0 0
  #define VP9_RESET_FRAME_CONTEXT_NONE1 1
diff --git a/drivers/media/platform/qcom/venus/hfi.h
b/drivers/media/platform/qcom/venus/hfi.h
index f25d412d6553..bd5ca5a8b945 100644
--- a/drivers/media/platform/qcom/venus/hfi.h
+++ b/drivers/media/platform/qcom/venus/hfi.h
@@ -10,6 +10,8 @@

  #include "hfi_helper.h"

+#define VB2_MAX_FRAME                          32
+
  #define VIDC_SESSION_TYPE_VPE                  0
  #define VIDC_SESSION_TYPE_ENC                  1
  #define VIDC_SESSION_TYPE_DEC                  2
diff --git a/drivers/media/platform/verisilicon/hantro_hw.h
b/drivers/media/platform/verisilicon/hantro_hw.h
index e83f0c523a30..9e8faf7ba6fb 100644
--- a/drivers/media/platform/verisilicon/hantro_hw.h
+++ b/drivers/media/platform/verisilicon/hantro_hw.h
@@ -15,6 +15,8 @@
  #include <media/v4l2-vp9.h>
  #include <media/videobuf2-core.h>

+#define VB2_MAX_FRAME  32
+
  #define DEC_8190_ALIGN_MASK    0x07U

  #define MB_DIM                 16
diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c
b/drivers/staging/media/ipu3/ipu3-v4l2.c
index e530767e80a5..6627b5c2d4d6 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -10,6 +10,8 @@
  #include "ipu3.h"
  #include "ipu3-dmamap.h"

+#define VB2_MAX_FRAME  32
+
  /******************** v4l2_subdev_ops ********************/

  #define IPU3_RUNNING_MODE_VIDEO                0
diff --git a/include/media/videobuf2-core.h
b/include/media/videobuf2-core.h
index 77921cf894ef..080b783d608d 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -20,7 +20,6 @@
  #include <media/media-request.h>
  #include <media/frame_vector.h>

-#define VB2_MAX_FRAME  (32)
  #define VB2_MAX_PLANES (8)

  /**
diff --git a/include/media/videobuf2-v4l2.h
b/include/media/videobuf2-v4l2.h
index 5a845887850b..88a7a565170e 100644
--- a/include/media/videobuf2-v4l2.h
+++ b/include/media/videobuf2-v4l2.h
@@ -15,10 +15,6 @@
  #include <linux/videodev2.h>
  #include <media/videobuf2-core.h>

-#if VB2_MAX_FRAME != VIDEO_MAX_FRAME
-#error VB2_MAX_FRAME != VIDEO_MAX_FRAME
-#endif
-
  #if VB2_MAX_PLANES != VIDEO_MAX_PLANES
  #error VB2_MAX_PLANES != VIDEO_MAX_PLANES
  #endif
--
2.39.2




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux