Em 29-09-2010 14:06, Giorgio escreveu: > Hello, > > I have an Asus P7131 Hybrid card, and it works like a charm with > Ubuntu 8.04 and stock kernel 2.6.24. But, after upgrading my system to > Ubuntu 10.04 x86-64, I noticed that the remote control was quite slow > to respond. Sometimes the keypresses aren't recognized, and you have > to keep pressing the same button two or three times until it works. > The remote feels slow, not very responsive. > So, to investigate the issue, I loaded the ir-common module with > debug=1 and looked at the logs. They report lots of "ir-common: > spurious timer_end". The funny thing is, I have tried the Ubuntu 10.04 > i386 livecd (with the same kernel) and the problem is not present > there. > Sep 27 15:48:59 holden-desktop kernel: [ 256.770031] ir-common: spurious timer_end > Sep 27 15:48:59 holden-desktop kernel: [ 256.880030] ir-common: spurious timer_end It is using the old RC support. This support will be removed soon, so, the better is to convert it to use the new IR core, and fix a bug there, if is there any. Please apply the attached patch (it is against my -git tree, but it will probably apply fine if you have a new kernel). You should notice that the RC_MAP_ASUS_PC39 table is not ready for the new IR infrastructure. So, you'll need to enable ir-core debug, and check what scancodes are detected there. Probably, all we need is to add the RC5 address to all codes at the table. Cheers, Mauro --- saa7134: port Asus P7131 Hybrid to use the new rc-core Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 52a1ee5..1bb813e 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -772,8 +772,10 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: case SAA7134_BOARD_ASUSTeK_P7131_ANALOG: ir_codes = RC_MAP_ASUS_PC39; - mask_keydown = 0x0040000; - rc5_gpio = 1; + mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */ + mask_keyup = 0x0040000; + mask_keycode = 0xffff; + raw_decode = 1; break; case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
