From: "Guoniu.zhou" <guoniu.zhou@xxxxxxx>
i.MX93 use a different gasket which has different register definition
compared with i.MX8. Hence implement the gasket callbacks in order to
add ISI support for i.MX93.
Signed-off-by: Guoniu.zhou <guoniu.zhou@xxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
.../platform/nxp/imx8-isi/imx8-isi-core.c | 15 ++++++++++
.../platform/nxp/imx8-isi/imx8-isi-core.h | 2 ++
.../platform/nxp/imx8-isi/imx8-isi-gasket.c | 30 +++++++++++++++++++
3 files changed, 47 insertions(+)
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
index 5165f8960c2c..27bd18b7ee65 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
@@ -307,6 +307,20 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data = {
.has_36bit_dma = true,
};
+static const struct mxc_isi_plat_data mxc_imx93_data = {
+ .model = MXC_ISI_IMX93,
+ .num_ports = 1,
+ .num_channels = 1,
+ .reg_offset = 0,
+ .ier_reg = &mxc_imx8_isi_ier_v2,
+ .set_thd = &mxc_imx8_isi_thd_v1,
+ .clks = mxc_imx8mn_clks,
+ .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
+ .buf_active_reverse = true,
+ .gasket_ops = &mxc_imx93_gasket_ops,
+ .has_36bit_dma = false,
+};
+
/* -----------------------------------------------------------------------------
* Power management
*/
@@ -518,6 +532,7 @@ static int mxc_isi_remove(struct platform_device *pdev)
static const struct of_device_id mxc_isi_of_match[] = {
{ .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
{ .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
+ { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, mxc_isi_of_match);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
index 78ca047d93d1..2810ebe9b5f7 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
@@ -158,6 +158,7 @@ struct mxc_gasket_ops {
enum model {
MXC_ISI_IMX8MN,
MXC_ISI_IMX8MP,
+ MXC_ISI_IMX93,
};
struct mxc_isi_plat_data {
@@ -295,6 +296,7 @@ struct mxc_isi_dev {
};
extern const struct mxc_gasket_ops mxc_imx8_gasket_ops;
+extern const struct mxc_gasket_ops mxc_imx93_gasket_ops;
int mxc_isi_crossbar_init(struct mxc_isi_dev *isi);
void mxc_isi_crossbar_cleanup(struct mxc_isi_crossbar *xbar);
diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
index 1d632dc60699..50ac1d3a2b6f 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
@@ -53,3 +53,33 @@ const struct mxc_gasket_ops mxc_imx8_gasket_ops = {
.enable = mxc_imx8_gasket_enable,
.disable = mxc_imx8_gasket_disable,
};
+
+/* -----------------------------------------------------------------------------
+ * i.MX93 gasket
+ **/
+
+#define DISP_MIX_CAMERA_MUX 0x30
+#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3)
+#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16)
+static void mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
+ const struct v4l2_mbus_frame_desc *fd,
+ const struct v4l2_mbus_framefmt *fmt,
+ const unsigned int port)
+{
+ u32 val;
+
+ val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
+ val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
+ regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
+}
+
+static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
+ unsigned int port)
+{
+ regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0);
+}
+
+const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
+ .enable = mxc_imx93_gasket_enable,
+ .disable = mxc_imx93_gasket_disable,
+};
--
2.37.1
