Hi Jacopo, On 6/27/23 16:11, Jacopo Mondi wrote: > Hi Hans > > seems like [12/29] is missing, it doesn't show up in patchwork > neither: > https://patchwork.linuxtv.org/project/linux-media/list/?series=10723 > > have I missed it ? Nope looks like something ate it. I've just resend it using "--in-reply-to=20230627131830.54601-1-hdegoede@xxxxxxxxxx" so that it should show up in the thread / patch-set. Regards, Hans > > On Tue, Jun 27, 2023 at 03:18:01PM +0200, Hans de Goede wrote: >> Hi All, >> >> Here is v3 of my ov2680 sensor driver patch series. >> >> Changes in v3: >> - Add Rui Miguel Silva's Ack for the series >> - 2 small fixes for remarks from Andy >> - Add a new patch adding me as co-maintainer in MAINTAINERS >> >> Changes in v2 >> - Drop "media: Add MIPI CCI register access helper functions" >> (being reviewed in its own thread / patch-submission) >> - Drop "media: ov2680: Add g_skip_frames op support" >> - Add "media: ov2680: Fix regulators being left enabled on >> ov2680_power_on() errors" >> - Add "media: ov2680: Add link-freq and pixel-rate controls" >> with this the driver now works on IPU3 with ipu3-capture.sh >> (libcamera support requires adding a couple more controls) >> - Limit line length to 80 chars everywhere >> - Address various small remarks from Andy >> >> During all the work done on the atomisp driver I have mostly been testing >> on devices with an ov2680 sensor. As such I have also done a lot of work >> on the atomisp-ov2680.c atomisp specific sensor driver. >> >> With the latest atomisp code from: >> https://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux.git/tag/?h=media-atomisp-6.5-1 >> >> The atomisp code can now work with standard v4l2 sensor drivers using >> the selections (crop-tgt) api and v4l2-async sensor driver registration. >> >> This patch series modifies the main drivers/media/i2c/ov2680.c driver >> to add bugfixes, ACPI enumeration, selection API support and further >> improvments. After this the driver can be used with the atomisp driver >> and atomisp-ov2680.c can be dropped. >> >> This also gets the driver much closer to having everything needed for >> use with IPU3 / libcamera. I have a Lenovo Miix 510 now with an IPU3 + >> ov2680 sensor and with this series raw-capture using the ipu3-capture.sh >> script works. I plan to work on libcamera support for this in the near >> future. >> >> This series consist of 3 parts: >> >> 1. Patches 1-8 are bugfixes these are put first for backporting >> >> 2. Patch 9 converts the ov2680 driver to the new CCI helpers, >> the same has been done in the other series with the atomisp-ov2680 >> driver and this makes it much easier to sync things up. >> >> Note this depends on the new CCI register helpers, these are being >> reviewed here: >> >> https://lore.kernel.org/linux-media/20230627125109.52354-1-hdegoede@xxxxxxxxxx/ >> >> 3. Patches 9 - 29 implement the ACPI enumeration, >> selection API support and further improvments. >> >> Regards, >> >> Hans >> >> >> >> Hans de Goede (29): >> media: ov2680: Remove auto-gain and auto-exposure controls >> media: ov2680: Fix ov2680_bayer_order() >> media: ov2680: Fix vflip / hflip set functions >> media: ov2680: Use select VIDEO_V4L2_SUBDEV_API >> media: ov2680: Don't take the lock for try_fmt calls >> media: ov2680: Add ov2680_fill_format() helper function >> media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY >> not working >> media: ov2680: Fix regulators being left enabled on ov2680_power_on() >> errors >> media: ov2680: Convert to new CCI register access helpers >> media: ov2680: Store dev instead of i2c_client in ov2680_dev >> media: ov2680: Check for "powerdown" GPIO con-id before checking for >> "reset" GPIO con-id >> media: ov2680: Add runtime-pm support >> media: ov2680: Drop is_enabled flag >> media: ov2680: Add support for more clk setups >> media: ov2680: Add support for 19.2 MHz clock >> media: ov2680: Add endpoint matching support >> media: ov2680: Add support for ACPI enumeration >> media: ov2680: Fix ov2680_enum_frame_interval() >> media: ov2680: Annotate the per mode register setting lists >> media: ov2680: Add ov2680_mode struct >> media: ov2680: Make setting the mode algorithm based >> media: ov2680: Add an __ov2680_get_pad_format() helper function >> media: ov2680: Implement selection support >> media: ov2680: Fix exposure and gain ctrls range and default value >> media: ov2680: Add a bunch of register tweaks >> media: ov2680: Drop unnecessary pad checks >> media: ov2680: Read and log sensor revision during probe >> media: ov2680: Add link-freq and pixel-rate controls >> MAINTAINERS: Add Hans de Goede as OV2680 sensor driver maintainer >> >> MAINTAINERS | 1 + >> drivers/media/i2c/Kconfig | 2 + >> drivers/media/i2c/ov2680.c | 1318 +++++++++++++++++++----------------- >> 3 files changed, 691 insertions(+), 630 deletions(-) >> >> -- >> 2.41.0 >> >
