Hi Tommaso,
Thanks for your comments. I have updated version 3 and your comments have been handled in the new version patches.
> -----Original Message-----
> From: Tommaso Merciai <tomm.merciai@xxxxxxxxx>
> Sent: 2023年6月27日 16:26
> To: G.N. Zhou (OSS) <guoniu.zhou@xxxxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>;
> devicetree@xxxxxxxxxxxxxxx; laurent.pinchart@xxxxxxxxxxxxxxxx;
> mchehab@xxxxxxxxxx; robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx;
> conor+dt@xxxxxxxxxx; Xavier Roumegue (OSS)
> <xavier.roumegue@xxxxxxxxxxx>; kernel@xxxxxxxxxxxxxx;
> jacopo.mondi@xxxxxxxxxxxxxxxx; sakari.ailus@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2 2/2] media: nxp: imx-isi: add ISI support for i.MX93
>
> Caution: This is an external email. Please take care when clicking links or opening
> attachments. When in doubt, report the message using the 'Report this email'
> button
>
>
> Hi Guoniu,
>
> On Mon, Jun 26, 2023 at 11:27:35AM +0800, guoniu.zhou@xxxxxxxxxxx wrote:
> > From: "Guoniu.zhou" <guoniu.zhou@xxxxxxx>
> >
> > Abstract gasket operation and driver should implement them for SoC
> > which support gasket.
> >
> > i.MX93 use a different gasket which has different register definition
> > compared with i.MX8. Hence implement the gasket callbacks in order to
> > add ISI support for i.MX93.
> >
> > Signed-off-by: Guoniu.zhou <guoniu.zhou@xxxxxxx>
> > ---
> > .../platform/nxp/imx8-isi/imx8-isi-core.c | 110 ++++++++++++++++++
> > .../platform/nxp/imx8-isi/imx8-isi-core.h | 33 ++++++
> > .../platform/nxp/imx8-isi/imx8-isi-crossbar.c | 51 ++++----
> > 3 files changed, 169 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > index 253e77189b69..d37145fb7f14 100644
> > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> > @@ -14,6 +14,7 @@
> > #include <linux/pm.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/property.h>
> > +#include <linux/regmap.h>
> > #include <linux/slab.h>
> > #include <linux/string.h>
> > #include <linux/types.h>
> > @@ -279,6 +280,54 @@ static const struct clk_bulk_data mxc_imx8mn_clks[]
> = {
> > { .id = "apb" },
> > };
> >
> > +static int mxc_imx8_gasket_config(struct mxc_isi_dev *isi,
> > + const struct v4l2_mbus_frame_desc *fd,
> > + const struct v4l2_mbus_framefmt *fmt,
> > + const unsigned int port) {
> > + u32 val;
> > +
> > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE,
> fmt->width);
> > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE,
> > + fmt->height);
> > +
> > + val = GASKET_CTRL_DATA_TYPE(fd->entry[0].bus.csi2.dt);
> > + if (fd->entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B)
> > + val |= GASKET_CTRL_DUAL_COMP_ENABLE;
> > +
> > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val);
> > +
> > + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n",
> > + fmt->width, fmt->height,
> > + fd->entry[0].bus.csi2.dt);
>
> Receive warning from checkpatch.pl:
Drop the debug message in v3
>
> CHECK: Alignment should match open parenthesis
> #49: FILE: drivers/media/platform/nx
p/imx8-isi/imx8-isi-core.c:300:
> + dev_dbg(isi->dev, "w/h=(%d, %d), data type=0x%x\n",
> + fmt->width, fmt->height,
>
> > +
> > + return 0;
> > +}
> > +
> > +static int mxc_imx8_gasket_enable(struct mxc_isi_dev *isi,
> > + const unsigned int port) {
> > + u32 val;
> > +
> > + regmap_read(isi->gasket, GASKET_BASE(port), &val);
> > + val |= GASKET_CTRL_ENABLE;
> > +
> > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val);
> > +
> > + return 0;
> > +}
> > +
> > +static void mxc_imx8_gasket_disable(struct mxc_isi_dev *isi,
> > + const unsigned int port) {
> > + regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0); }
> > +
> > +static const struct mxc_gasket_ops mxc_imx8_gasket_ops = {
> > + .config = mxc_imx8_gasket_config,
> > + .enable = mxc_imx8_gasket_enable,
> > + .disable = mxc_imx8_gasket_disable, };
> > +
> > static const struct mxc_isi_plat_data mxc_imx8mn_data = {
> > .model = MXC_ISI_IMX8MN,
> > .num_ports = 1,
> > @@ -290,6 +339,7 @@ static const struct mxc_isi_plat_data
> mxc_imx8mn_data = {
> > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> > .buf_active_reverse = false,
> > .has_gasket = true,
> > + .gasket_ops = &mxc_imx8_gasket_ops,
> > .has_36bit_dma = false,
> > };
> >
> > @@ -304,6 +354,65 @@ static const struct mxc_isi_plat_data
> mxc_imx8mp_data = {
> > .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> > .buf_active_reverse = true,
> > .has_gasket = true,
> > + .gasket_ops = &mxc_imx8_gasket_ops,
> > + .has_36bit_dma = true,
> > +};
> > +
> > +static int mxc_imx93_gasket_config(struct mxc_isi_dev *isi,
> > + const struct v4l2_mbus_frame_desc
> *fd,
> > + const struct v4l2_mbus_framefmt
> *fmt,
> > + const unsigned int port) {
> > + u32 val;
> > +
> > + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
> > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
> > +
> > + dev_dbg(isi->dev, "data type=0x%x\n", fd->entry[0].bus.csi2.dt);
> > +
> > + return 0;
> > +}
> > +
> > +static int mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
> > + const unsigned int port) {
> > + u32 val;
> > +
> > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val);
> > + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
> > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
> > +
> > + return 0;
> > +}
> > +
> > +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
> > + unsigned int port) {
> > + u32 val;
> > +
> > + regmap_read(isi->gasket, DISP_MIX_CAMERA_MUX, &val);
> > + val &= ~DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
> > + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val); }
> > +
> > +static const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
> > + .config = mxc_imx93_gasket_config,
> > + .enable = mxc_imx93_gasket_enable,
> > + .disable = mxc_imx93_gasket_disable, };
> > +
> > +static const struct mxc_isi_plat_data mxc_imx93_data = {
> > + .model = MXC_ISI_IMX93,
> > + .num_ports = 1,
> > + .num_channels = 1,
> > + .reg_offset = 0,
> > + .ier_reg = &mxc_imx8_isi_ier_v2,
> > + .set_thd = &mxc_imx8_isi_thd_v1,
> > + .clks = mxc_imx8mn_clks,
> > + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> > + .buf_active_reverse = true,
> > + .has_gasket = true,
> > + .gasket_ops = &mxc_imx93_gasket_ops,
> > .has_36bit_dma = true,
> > };
> >
> > @@ -518,6 +627,7 @@ static int mxc_isi_remove(struct platform_device
> > *pdev) static const struct of_device_id mxc_isi_of_match[] = {
> > { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
> > { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
> > + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
> > { /* sentinel */ },
> > };
> > MODULE_DEVICE_TABLE(of, mxc_isi_of_match); diff --git
> > a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > index e469788a9e6c..c425edb6fbea 100644
> > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> > @@ -18,6 +18,7 @@
> >
> > #include <media/media-device.h>
> > #include <media/media-entity.h>
> > +#include <media/mipi-csi2.h>
> > #include <media/v4l2-async.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-dev.h>
> > @@ -59,6 +60,27 @@ struct v4l2_m2m_dev;
> > #define MXC_ISI_M2M "mxc-isi-m2m"
> > #define MXC_MAX_PLANES 3
> >
> > +/* GASKET (i.MX8MN and i.MX8MP only) */
> > +#define GASKET_BASE(n) (0x0060 + (n) *
> 0x30)
> > +
> > +#define GASKET_CTRL 0x0000
> > +#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8)
> > +#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8)
> > +#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1)
> > +#define GASKET_CTRL_ENABLE BIT(0)
> > +
> > +#define GASKET_HSIZE 0x0004
> > +#define GASKET_VSIZE 0x0008
> > +
> > +/* dispmix_GPR register (i.MX93 only) */
> > +#define DISP_MIX_CAMERA_MUX 0x30
> > +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3)
> > +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16)
> > +
> > +#define DISP_MIX_CSI_REG 0x48
> > +#define DISP_MIX_CSI_REG_CFGFREQRANGE(x) ((x) & 0x3f)
> > +#define DISP_MIX_CSI_REG_HSFREQRANGE(x) (((x) & 0x7f) << 8)
> > +
>
> ^Can you use tabs instead of space here?
Done in v3
>
>
> > struct mxc_isi_dev;
> > struct mxc_isi_m2m_ctx;
> >
> > @@ -147,9 +169,19 @@ struct mxc_isi_set_thd {
> > struct mxc_isi_panic_thd panic_set_thd_v; };
> >
> > +struct mxc_gasket_ops {
> > + int (*enable)(struct mxc_isi_dev *isi, const unsigned int port);
> > + int (*config)(struct mxc_isi_dev *isi,
> > + const struct v4l2_mbus_frame_desc *fd,
> > + const struct v4l2_mbus_framefmt *fmt,
> > + const unsigned int port);
> > + void (*disable)(struct mxc_isi_dev *isi, const unsigned int
> > +port); };
> > +
> > enum model {
> > MXC_ISI_IMX8MN,
> > MXC_ISI_IMX8MP,
> > + MXC_ISI_IMX93,
> > };
> >
> > struct mxc_isi_plat_data {
> > @@ -160,6 +192,7 @@ struct mxc_isi_plat_data {
> > const struct mxc_isi_ier_reg *ier_reg;
> > const struct mxc_isi_set_thd *set_thd;
> > const struct clk_bulk_data *clks;
> > + const struct mxc_gasket_ops *gasket_ops;
> > unsigned int num_clks;
> > bool buf_active_reverse;
> > bool has_gasket;
> > diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> > b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> > index f7447b2f4d77..855b31e3dade 100644
> > --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> > +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> > @@ -25,20 +25,6 @@ static inline struct mxc_isi_crossbar
> *to_isi_crossbar(struct v4l2_subdev *sd)
> > return container_of(sd, struct mxc_isi_crossbar, sd); }
> >
> > -/*
> > ----------------------------------------------------------------------
> > -------
> > - * Media block control (i.MX8MN and i.MX8MP only)
> > - */
> > -#define GASKET_BASE(n) (0x0060 + (n) *
> 0x30)
> > -
> > -#define GASKET_CTRL 0x0000
> > -#define GASKET_CTRL_DATA_TYPE(dt) ((dt) << 8)
> > -#define GASKET_CTRL_DATA_TYPE_MASK (0x3f << 8)
> > -#define GASKET_CTRL_DUAL_COMP_ENABLE BIT(1)
> > -#define GASKET_CTRL_ENABLE BIT(0)
> > -
> > -#define GASKET_HSIZE 0x0004
> > -#define GASKET_VSIZE 0x0008
> > -
> > static int mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar,
> > struct v4l2_subdev_state
> *state,
> > struct v4l2_subdev
> *remote_sd,
> > @@ -46,13 +32,16 @@ static int mxc_isi_crossbar_gasket_enable(struct
> > mxc_isi_crossbar *xbar, {
> > struct mxc_isi_dev *isi = xbar->isi;
> > const struct v4l2_mbus_framefmt *fmt;
> > + const struct mxc_gasket_ops *gasket_ops = NULL;
> > struct v4l2_mbus_frame_desc fd;
> > - u32 val;
> > int ret;
> >
> > if (!isi->pdata->has_gasket)
> > return 0;
> >
> > + if (isi->pdata->gasket_ops)
> > + gasket_ops = isi->pdata->gasket_ops;
> > +
> > /*
> > * Configure and enable the gasket with the frame size and CSI-2 data
> > * type. For YUV422 8-bit, enable dual component mode
> > unconditionally, @@ -77,16 +66,23 @@ static int
> mxc_isi_crossbar_gasket_enable(struct mxc_isi_crossbar *xbar,
> > if (!fmt)
> > return -EINVAL;
> >
> > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_HSIZE,
> fmt->width);
> > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_VSIZE,
> fmt->height);
> > -
> > - val = GASKET_CTRL_DATA_TYPE(fd.entry[0].bus.csi2.dt)
> > - | GASKET_CTRL_ENABLE;
> > -
> > - if (fd.entry[0].bus.csi2.dt == MIPI_CSI2_DT_YUV422_8B)
> > - val |= GASKET_CTRL_DUAL_COMP_ENABLE;
> > + if (gasket_ops && gasket_ops->config) {
> > + ret = gasket_ops->config(isi, &fd, fmt, port);
> > + if (ret) {
> > + dev_err(isi->dev,
> > + "failed to configure gasket%d\n", port);
>
> What about keep this print on the same line?
Ok, I will update when handle comments in v3 if have. If no, I will send a new version if it's necessary.
>
> > + return ret;
> > + }
> > + }
> >
> > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, val);
> > + if (gasket_ops && gasket_ops->enable) {
> > + ret = gasket_ops->enable(isi, port);
> > + if (ret) {
> > + dev_err(isi->dev,
> > + "failed to enable gasket%d\n", port);
>
> Same here :)
>
> > + return ret;
> > + }
> > + }
> >
> > return 0;
> > }
> > @@ -95,11 +91,16 @@ static void mxc_isi_crossbar_gasket_disable(struct
> mxc_isi_crossbar *xbar,
> > unsigned int port) {
> > struct mxc_isi_dev *isi = xbar->isi;
> > + const struct mxc_gasket_ops *gasket_ops = NULL;
> >
> > if (!isi->pdata->has_gasket)
> > return;
> >
> > - regmap_write(isi->gasket, GASKET_BASE(port) + GASKET_CTRL, 0);
> > + if (isi->pdata->gasket_ops)
> > + gasket_ops = isi->pdata->gasket_ops;
> > +
> > + if (gasket_ops && gasket_ops->disable)
> > + gasket_ops->disable(isi, port);
> > }
>
>
> Thanks & Regards,
> Tommaso
>
> >
> > /* -----------------------------------------------------------------------------
> > --
> > 2.37.1
> >
