yes I tested
modetest -M starfive -D 0 -s 116@31:1280x720-59.94 -v
modetest -M starfive -D 0 -s 116@31:1920x1080 -v
and the second command will repeat the problem
as you advise at the beginning
I call the "starfive_hdmi_setup" function in the "starfive_hdmi_encoder_enable"
instead of "starfive_hdmi_encoder_mode_set"
resolve the problem
i will add this modify in my next patch
Thank you Hoegeun
On 2023/6/23 10:38, Hoegeun Kwon wrote:
> Hi Keith,
>
> There is a problem with stopping when changing modes.
>
> Below test log
>
> root:~> modetest -Mstarfive -c
> Connectors:
> id encoder status name size (mm) modes
> encoders
> 116 115 connected HDMI-A-1 320x180 51 115
> modes:
> index name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot
> #0 1280x800 59.91 1280 1328 1360 1440 800 803 809 823 71000 flags: phsync,
> pvsync; type: preferred, driver
> #1 1920x1080 60.00 1920 2008 2052 2200 1080 1084 1089 1125 148500 flags:
> phsync, pvsync; type: driver
> [...]
>
> root:~> modetest -Mstarfive -s 116:#0 -v
> setting mode 1280x800-59.91Hz on connectors 116, crtc 31
> freq: 60.65Hz
> freq: 59.91Hz
> freq: 59.91Hz
>
> root:~> modetest -Mstarfive -s 116:#1 -v
> setting mode 1920x1080-60.00Hz on connectors 116, crtc 31
> [ 94.535626] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 94.560985] rcu: 1-...0: (20 ticks this GP)
> idle=c9bc/1/0x4000000000000000 softirq=3869/3871 fqs=1120
> [ 94.589532] rcu: (detected by 3, t=5264 jiffies, g=4645, q=63
> ncpus=4)
> [ 94.615335] Task dump for CPU 1:
> [ 94.637723] task:modetest state:R running task stack:0
> pid:407 ppid:397 flags:0x00000008
> [ 94.667299] Call Trace:
> [ 94.689297] [<ffffffff80d1e8fc>] __schedule+0x2a8/0xa52
> [ 94.714221] [<ffffffff80d1f100>] schedule+0x5a/0xdc
> [ 94.738626] [<ffffffff80d25a14>] schedule_timeout+0x220/0x2a6
> [ 94.763762] [<ffffffff80d2037a>] wait_for_completion+0xfe/0x126
> [ 94.789073] [<ffffffff8002ffe4>] kthread_flush_worker+0x82/0xa0
>
>
>> -----Original Message-----
>> From: dri-devel <dri-devel-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of
>> Keith Zhao
>> Sent: Friday, June 2, 2023 4:41 PM
>> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
>> kernel@xxxxxxxxxxxxxxx; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
>> media@xxxxxxxxxxxxxxx; linaro-mm-sig@xxxxxxxxxxxxxxxx
>> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Sumit Semwal
>> <sumit.semwal@xxxxxxxxxx>; Emil Renner Berthing <kernel@xxxxxxxx>;
>> Shengyang Chen <shengyang.chen@xxxxxxxxxxxxxxxx>; Conor Dooley
>> <conor+dt@xxxxxxxxxx>; Albert Ou <aou@xxxxxxxxxxxxxxxxx>; Thomas
>> Zimmermann <tzimmermann@xxxxxxx>; Jagan Teki <jagan@xxxxxxxxxx>; Rob
>> Herring <robh+dt@xxxxxxxxxx>; Chris Morgan <macromorgan@xxxxxxxxxxx>; Paul
>> Walmsley <paul.walmsley@xxxxxxxxxx>; Keith Zhao
>> <keith.zhao@xxxxxxxxxxxxxxxx>; Bjorn Andersson <andersson@xxxxxxxxxx>;
>> Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>; Jack Zhu
>> <jack.zhu@xxxxxxxxxxxxxxxx>; Palmer Dabbelt <palmer@xxxxxxxxxxx>; Shawn
>> Guo <shawnguo@xxxxxxxxxx>; christian.koenig@xxxxxxx
>> Subject: [PATCH 9/9] drm/verisilicon: Add starfive hdmi driver
>>
>> Add HDMI dirver for StarFive SoC JH7110.
>>
>> Signed-off-by: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/verisilicon/Kconfig | 11 +
>> drivers/gpu/drm/verisilicon/Makefile | 1 +
>> drivers/gpu/drm/verisilicon/starfive_hdmi.c | 928 ++++++++++++++++++++
>> drivers/gpu/drm/verisilicon/starfive_hdmi.h | 296 +++++++
>> drivers/gpu/drm/verisilicon/vs_drv.c | 6 +
>> drivers/gpu/drm/verisilicon/vs_drv.h | 4 +
>> 6 files changed, 1246 insertions(+)
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
>
> [...]
>
>> diff --git a/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> new file mode 100644
>> index 000000000000..128ecca03309
>> --- /dev/null
>> +++ b/drivers/gpu/drm/verisilicon/starfive_hdmi.c
>> @@ -0,0 +1,928 @@
>
> [...]
>
>> +static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
>> + struct drm_display_mode *mode) {
>
> [...]
>
>> + return 0;
>> +}
>> +
>> +static void starfive_hdmi_encoder_mode_set(struct drm_encoder *encoder,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode
> *adj_mode) {
>> + struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> + starfive_hdmi_setup(hdmi, adj_mode);
>
> When starfive_hdmi_setup runs here,
> when changing the mode, a problem occurs because try to write a value to reg
> in a state that is not resumed after suspend.
>
>> +
>> + memcpy(&hdmi->previous_mode, adj_mode, sizeof(hdmi-
>> >previous_mode)); }
>> +
>> +static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder) {
>> + struct starfive_hdmi *hdmi = encoder_to_hdmi(encoder);
>> +
>> + pm_runtime_get_sync(hdmi->dev);
>
> So if move the call point of starfive_hdmi_setup here, it works normally.
>
>> +}
>
> Best regards,
> Hoegeun
>
>
