Re: [PATCH v2] fbdev/media: Use GPIO descriptors for VIA GPIO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/13/23 08:33, Linus Walleij wrote:
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.

Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.

Cc: Jonathan Corbet <corbet@xxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v1->v2:
- Fix a missed include (I guess I had an old compiled
   object that just worked...)

I don't know about the merge path for this one, let's merge
it in the provider (fbdev) if possible.

I've applied it to the fbdev git tree.

Thanks!
Helge



This looks like OLPC stuff.
---
  drivers/media/platform/via/via-camera.c       | 51 ++++++++-----------
  drivers/video/fbdev/via/via-core.c            |  2 +-
  drivers/video/fbdev/via/via-gpio.c            | 28 +++++-----
  .../video/fbdev/via}/via-gpio.h               |  1 -
  4 files changed, 35 insertions(+), 47 deletions(-)
  rename {include/linux => drivers/video/fbdev/via}/via-gpio.h (84%)

diff --git a/drivers/media/platform/via/via-camera.c b/drivers/media/platform/via/via-camera.c
index 450254403fa8..4cb8f29e2f14 100644
--- a/drivers/media/platform/via/via-camera.c
+++ b/drivers/media/platform/via/via-camera.c
@@ -11,7 +11,7 @@
  #include <linux/device.h>
  #include <linux/list.h>
  #include <linux/pci.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
  #include <linux/interrupt.h>
  #include <linux/platform_device.h>
  #include <linux/videodev2.h>
@@ -26,7 +26,6 @@
  #include <linux/dma-mapping.h>
  #include <linux/pm_qos.h>
  #include <linux/via-core.h>
-#include <linux/via-gpio.h>
  #include <linux/via_i2c.h>

  #ifdef CONFIG_X86
@@ -71,8 +70,8 @@ struct via_camera {
  	/*
  	 * GPIO info for power/reset management
  	 */
-	int power_gpio;
-	int reset_gpio;
+	struct gpio_desc *power_gpio;
+	struct gpio_desc *reset_gpio;
  	/*
  	 * I/O memory stuff.
  	 */
@@ -180,27 +179,19 @@ static struct via_format *via_find_format(u32 pixelformat)
   */
  static int via_sensor_power_setup(struct via_camera *cam)
  {
-	int ret;
+	struct device *dev = &cam->platdev->dev;
+
+	cam->power_gpio = devm_gpiod_get(dev, "VGPIO3", GPIOD_OUT_LOW);
+	if (IS_ERR(cam->power_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->power_gpio),
+				     "failed to get power GPIO");
+
+	/* Request the reset line asserted */
+	cam->reset_gpio = devm_gpiod_get(dev, "VGPIO2", GPIOD_OUT_HIGH);
+	if (IS_ERR(cam->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(cam->reset_gpio),
+				     "failed to get reset GPIO");

-	cam->power_gpio = viafb_gpio_lookup("VGPIO3");
-	cam->reset_gpio = viafb_gpio_lookup("VGPIO2");
-	if (!gpio_is_valid(cam->power_gpio) || !gpio_is_valid(cam->reset_gpio)) {
-		dev_err(&cam->platdev->dev, "Unable to find GPIO lines\n");
-		return -EINVAL;
-	}
-	ret = gpio_request(cam->power_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request power GPIO\n");
-		return ret;
-	}
-	ret = gpio_request(cam->reset_gpio, "viafb-camera");
-	if (ret) {
-		dev_err(&cam->platdev->dev, "Unable to request reset GPIO\n");
-		gpio_free(cam->power_gpio);
-		return ret;
-	}
-	gpio_direction_output(cam->power_gpio, 0);
-	gpio_direction_output(cam->reset_gpio, 0);
  	return 0;
  }

@@ -209,25 +200,23 @@ static int via_sensor_power_setup(struct via_camera *cam)
   */
  static void via_sensor_power_up(struct via_camera *cam)
  {
-	gpio_set_value(cam->power_gpio, 1);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 1);
  	msleep(20);  /* Probably excessive */
-	gpio_set_value(cam->reset_gpio, 1);
+	gpiod_set_value(cam->reset_gpio, 0);
  	msleep(20);
  }

  static void via_sensor_power_down(struct via_camera *cam)
  {
-	gpio_set_value(cam->power_gpio, 0);
-	gpio_set_value(cam->reset_gpio, 0);
+	gpiod_set_value(cam->power_gpio, 0);
+	gpiod_set_value(cam->reset_gpio, 1);
  }


  static void via_sensor_power_release(struct via_camera *cam)
  {
  	via_sensor_power_down(cam);
-	gpio_free(cam->power_gpio);
-	gpio_free(cam->reset_gpio);
  }

  /* --------------------------------------------------------------------------*/
diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 2c1803eb196f..908524a74a38 100644
--- a/drivers/video/fbdev/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
@@ -11,7 +11,7 @@
  #include <linux/aperture.h>
  #include <linux/via-core.h>
  #include <linux/via_i2c.h>
-#include <linux/via-gpio.h>
+#include "via-gpio.h"
  #include "global.h"

  #include <linux/module.h>
diff --git a/drivers/video/fbdev/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index f1b670397c02..2719943c06f4 100644
--- a/drivers/video/fbdev/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
@@ -7,10 +7,11 @@

  #include <linux/spinlock.h>
  #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
  #include <linux/platform_device.h>
  #include <linux/via-core.h>
-#include <linux/via-gpio.h>
  #include <linux/export.h>
+#include "via-gpio.h"

  /*
   * The ports we know about.  Note that the port-25 gpios are not
@@ -189,19 +190,14 @@ static struct viafb_pm_hooks viafb_gpio_pm_hooks = {
  };
  #endif /* CONFIG_PM */

-/*
- * Look up a specific gpio and return the number it was assigned.
- */
-int viafb_gpio_lookup(const char *name)
-{
-	int i;
-
-	for (i = 0; i < viafb_gpio_config.gpio_chip.ngpio; i++)
-		if (!strcmp(name, viafb_gpio_config.active_gpios[i]->vg_name))
-			return viafb_gpio_config.gpio_chip.base + i;
-	return -1;
-}
-EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+static struct gpiod_lookup_table viafb_gpio_table = {
+	.dev_id = "viafb-camera",
+	.table = {
+		GPIO_LOOKUP("via-gpio", 2, "VGPIO2", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("via-gpio", 3, "VGPIO3", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};

  /*
   * Platform device stuff.
@@ -249,12 +245,16 @@ static int viafb_gpio_probe(struct platform_device *platdev)
  	 * Get registered.
  	 */
  	viafb_gpio_config.gpio_chip.base = -1;  /* Dynamic */
+	viafb_gpio_config.gpio_chip.label = "via-gpio";
  	ret = gpiochip_add_data(&viafb_gpio_config.gpio_chip,
  				&viafb_gpio_config);
  	if (ret) {
  		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
  		viafb_gpio_config.gpio_chip.ngpio = 0;
  	}
+
+	gpiod_add_lookup_table(&viafb_gpio_table);
+
  #ifdef CONFIG_PM
  	viafb_pm_register(&viafb_gpio_pm_hooks);
  #endif
diff --git a/include/linux/via-gpio.h b/drivers/video/fbdev/via/via-gpio.h
similarity index 84%
rename from include/linux/via-gpio.h
rename to drivers/video/fbdev/via/via-gpio.h
index ac34668fd442..2ffedf282f7e 100644
--- a/include/linux/via-gpio.h
+++ b/drivers/video/fbdev/via/via-gpio.h
@@ -8,7 +8,6 @@
  #ifndef __VIA_GPIO_H__
  #define __VIA_GPIO_H__

-extern int viafb_gpio_lookup(const char *name);
  extern int viafb_gpio_init(void);
  extern void viafb_gpio_exit(void);
  #endif





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux