Currently the only 2 sensor_config-s both specify "avdd" as supply-id.
The INT3472 device is going to be the only supplier of a regulator for
the sensor device.
So there is no chance of collisions with other regulator suppliers
and it is undesirable to need to manually add new entries to
int3472_sensor_configs[] for each new sensor module which uses
a GPIO regulator.
Instead just always use "avdd" as supply-id when registering
the GPIO regulator.
If necessary for specific sensor drivers then other supply-ids can
be added as aliases in the future, adding aliases will be safe
since INT3472 will be the only regulator supplier for the sensor.
Cc: Bingbu Cao <bingbu.cao@xxxxxxxxx>
Tested-by: Hao Yao <hao.yao@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
- Use static_assert() to check that GPIO_REGULATOR_SUPPLY_MAP_COUNT
and ARRAY_SIZE(skl_int3472_regulator_map_supplies) match
---
.../x86/intel/int3472/clk_and_regulator.c | 40 ++++++++++-------
drivers/platform/x86/intel/int3472/common.h | 7 +--
drivers/platform/x86/intel/int3472/discrete.c | 45 +++----------------
3 files changed, 31 insertions(+), 61 deletions(-)
diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index 410073ca371c..5487f3ab66ad 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -234,32 +234,40 @@ void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
gpiod_put(int3472->clock.ena_gpio);
}
+/*
+ * The INT3472 device is going to be the only supplier of a regulator for
+ * the sensor device. But unlike the clk framework the regulator framework
+ * does not allow matching by consumer-device-name only.
+ *
+ * Ideally all sensor drivers would use "avdd" as supply-id. But for drivers
+ * where this cannot be changed because another supply-id is already used in
+ * e.g. DeviceTree files an alias for the other supply-id can be added here.
+ *
+ * Do not forget to update GPIO_REGULATOR_SUPPLY_MAP_COUNT when changing this.
+ */
+static const char * const skl_int3472_regulator_map_supplies[] = {
+ "avdd",
+};
+
+static_assert(ARRAY_SIZE(skl_int3472_regulator_map_supplies) ==
+ GPIO_REGULATOR_SUPPLY_MAP_COUNT);
+
int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
struct acpi_resource_gpio *agpio)
{
- const struct int3472_sensor_config *sensor_config;
char *path = agpio->resource_source.string_ptr;
- struct regulator_consumer_supply supply_map;
struct regulator_init_data init_data = { };
struct regulator_config cfg = { };
- int ret;
+ int i, ret;
- sensor_config = int3472->sensor_config;
- if (IS_ERR(sensor_config)) {
- dev_err(int3472->dev, "No sensor module config\n");
- return PTR_ERR(sensor_config);
- }
-
- if (!sensor_config->supply_map.supply) {
- dev_err(int3472->dev, "No supply name defined\n");
- return -ENODEV;
+ for (i = 0; i < ARRAY_SIZE(skl_int3472_regulator_map_supplies); i++) {
+ int3472->regulator.supply_map[i].supply = skl_int3472_regulator_map_supplies[i];
+ int3472->regulator.supply_map[i].dev_name = int3472->sensor_name;
}
init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
- init_data.num_consumer_supplies = 1;
- supply_map = sensor_config->supply_map;
- supply_map.dev_name = int3472->sensor_name;
- init_data.consumer_supplies = &supply_map;
+ init_data.consumer_supplies = int3472->regulator.supply_map;
+ init_data.num_consumer_supplies = GPIO_REGULATOR_SUPPLY_MAP_COUNT;
snprintf(int3472->regulator.regulator_name,
sizeof(int3472->regulator.regulator_name), "%s-regulator",
diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
index 735567f374a6..225b067c854d 100644
--- a/drivers/platform/x86/intel/int3472/common.h
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -28,6 +28,7 @@
#define GPIO_REGULATOR_NAME_LENGTH 21
#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH 9
+#define GPIO_REGULATOR_SUPPLY_MAP_COUNT 1
#define INT3472_LED_MAX_NAME_LEN 32
@@ -69,11 +70,6 @@ struct int3472_cldb {
u8 reserved2[17];
};
-struct int3472_sensor_config {
- const char *sensor_module_name;
- struct regulator_consumer_supply supply_map;
-};
-
struct int3472_discrete_device {
struct acpi_device *adev;
struct device *dev;
@@ -83,6 +79,7 @@ struct int3472_discrete_device {
const struct int3472_sensor_config *sensor_config;
struct int3472_gpio_regulator {
+ struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT];
char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH];
struct gpio_desc *gpio;
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 2ab3c7466986..3b410428cec2 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -34,48 +34,17 @@ static const guid_t cio2_sensor_module_guid =
GUID_INIT(0x822ace8f, 0x2814, 0x4174,
0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee);
-/*
- * Here follows platform specific mapping information that we can pass to
- * the functions mapping resources to the sensors. Where the sensors have
- * a power enable pin defined in DSDT we need to provide a supply name so
- * the sensor drivers can find the regulator. The device name will be derived
- * from the sensor's ACPI device within the code.
- */
-static const struct int3472_sensor_config int3472_sensor_configs[] = {
- /* Lenovo Miix 510-12ISK - OV5648, Rear */
- { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL) },
- /* Surface Go 1&2 - OV5693, Front */
- { "YHCU", REGULATOR_SUPPLY("avdd", NULL) },
-};
-
-static const struct int3472_sensor_config *
-skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472)
+static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *int3472)
{
union acpi_object *obj;
- unsigned int i;
obj = acpi_evaluate_dsm_typed(int3472->sensor->handle,
&cio2_sensor_module_guid, 0x00,
0x01, NULL, ACPI_TYPE_STRING);
-
- if (!obj) {
- dev_err(int3472->dev,
- "Failed to get sensor module string from _DSM\n");
- return ERR_PTR(-ENODEV);
+ if (obj) {
+ dev_dbg(int3472->dev, "Sensor module id: '%s'\n", obj->string.pointer);
+ ACPI_FREE(obj);
}
-
- for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) {
- if (!strcmp(int3472_sensor_configs[i].sensor_module_name,
- obj->string.pointer))
- break;
- }
-
- ACPI_FREE(obj);
-
- if (i >= ARRAY_SIZE(int3472_sensor_configs))
- return ERR_PTR(-EINVAL);
-
- return &int3472_sensor_configs[i];
}
static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
@@ -266,11 +235,7 @@ static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472)
LIST_HEAD(resource_list);
int ret;
- /*
- * No error check, because not having a sensor config is not necessarily
- * a failure mode.
- */
- int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472);
+ skl_int3472_log_sensor_module_name(int3472);
ret = acpi_dev_get_resources(int3472->adev, &resource_list,
skl_int3472_handle_gpio_resources,
--
2.41.0
