Hi, v13 can be found from: https://lore.kernel.org/all/20230426115114.156696-1-tomi.valkeinen@xxxxxxxxxxxxxxxx/ In this version I opted to keep the main patches unchanged and make the new changes as additional patches. The reason is that the main patches have been reviewed and have been out there for quite a while, and the fixes & improvements are much clearer this way. Tomi Luca Ceresoli (1): i2c: add I2C Address Translator (ATR) support Tomi Valkeinen (17): dt-bindings: i2c: Add I2C Address Translator (ATR) dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer media: i2c: add DS90UB960 driver media: i2c: add DS90UB913 driver media: i2c: add DS90UB953 driver media: i2c: ds90ub960: Fix use of UB960_SR_FWD_CTL1 media: i2c: ds90ub9xx: Add COMMON_CLK kconfig dependency media: i2c: ds90ub9xx: Select GPIOLIB rather than OF_GPIO media: i2c: ds90ub960: Configure CSI-2 continuous clock media: i2c: ds90ub953: Use v4l2_fwnode_endpoint_parse() media: i2c: ds90ub913: Use v4l2_fwnode_endpoint_parse() media: i2c: ds90ub953: Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK media: i2c: ds90ub960: Allow FPD-Link async mode media: i2c: ds90ub953: Restructure clkout management media: i2c: ds90ub953: Support non-sync mode .../devicetree/bindings/i2c/i2c-atr.yaml | 34 + .../bindings/media/i2c/ti,ds90ub913.yaml | 133 + .../bindings/media/i2c/ti,ds90ub953.yaml | 134 + .../bindings/media/i2c/ti,ds90ub960.yaml | 427 ++ Documentation/i2c/i2c-address-translators.rst | 96 + Documentation/i2c/index.rst | 1 + MAINTAINERS | 16 + drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-atr.c | 710 +++ drivers/media/i2c/Kconfig | 47 + drivers/media/i2c/Makefile | 3 + drivers/media/i2c/ds90ub913.c | 914 ++++ drivers/media/i2c/ds90ub953.c | 1434 ++++++ drivers/media/i2c/ds90ub960.c | 4058 +++++++++++++++++ include/linux/i2c-atr.h | 116 + include/media/i2c/ds90ub9xx.h | 22 + 17 files changed, 8155 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-atr.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml create mode 100644 Documentation/i2c/i2c-address-translators.rst create mode 100644 drivers/i2c/i2c-atr.c create mode 100644 drivers/media/i2c/ds90ub913.c create mode 100644 drivers/media/i2c/ds90ub953.c create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/linux/i2c-atr.h create mode 100644 include/media/i2c/ds90ub9xx.h -- 2.34.1
