Hello All, This series add support for Allied Vision Alvium camera. The Alvium camera is shipped with sensor + isp in the same housing. The camera can be equipped with one out of various sensor and abstract the user from this. Camera is connected via MIPI CSI-2. Working on top of Ideas on Board (branch: ideasonboard/v6.2/isi) I'm able to test the driver on imx8mp-evk. I collect also some patches to enable HDMI on imx8mp-evk from Pengutronix (branch: pengutronix-imx8mp-hdmi) I collect the patchset required to enable ISI + HDMI on imx8mp-evk into the following branch from Avnet Silica Software & Services EMEA [1]. Some documentation on testing ISP and ISI of imx8mp-evk here [2]. Thanks all for the great work! [1] - https://github.com/avs-sas/linux/tree/tm/ideasonboard/v6.4.0-rc2/isi/imx8mp_evk/alvium_drv_skel1e_v1 [2] - https://gist.github.com/Scott31393/077a10024a6058536d3f2fdde476265a Tommaso Merciai (3): dt-bindings: vendor-prefixes: Add prefix alliedvision media: dt-bindings: alvium: add document YAML binding media: i2c: Add support for alvium camera .../media/i2c/alliedvision,alvium-csi2.yaml | 97 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/alvium-csi2.c | 3159 +++++++++++++++++ drivers/media/i2c/alvium-csi2.h | 475 +++ 6 files changed, 3745 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml create mode 100644 drivers/media/i2c/alvium-csi2.c create mode 100644 drivers/media/i2c/alvium-csi2.h -- 2.34.1
