On Wed, Jun 14, 2023 at 10:24 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> The helpers in this header are not used anywhere anymore,
> they have been superseded by the new CCI register access helpers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> include/media/ov_16bit_addr_reg_helpers.h | 92 -----------------------
> 1 file changed, 92 deletions(-)
> delete mode 100644 include/media/ov_16bit_addr_reg_helpers.h
>
> diff --git a/include/media/ov_16bit_addr_reg_helpers.h b/include/media/ov_16bit_addr_reg_helpers.h
> deleted file mode 100644
> index 1c60a50bd795..000000000000
> --- a/include/media/ov_16bit_addr_reg_helpers.h
> +++ /dev/null
> @@ -1,92 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0 */
> -/*
> - * I2C register access helpers for Omnivision OVxxxx image sensors which expect
> - * a 16 bit register address in big-endian format and which have 1-3 byte
> - * wide registers, in big-endian format (for the higher width registers).
> - *
> - * Based on the register helpers from drivers/media/i2c/ov2680.c which is:
> - * Copyright (C) 2018 Linaro Ltd
> - */
> -#ifndef __OV_16BIT_ADDR_REG_HELPERS_H
> -#define __OV_16BIT_ADDR_REG_HELPERS_H
> -
> -#include <asm/unaligned.h>
> -#include <linux/dev_printk.h>
> -#include <linux/i2c.h>
> -
> -static inline int ov_read_reg(struct i2c_client *client, u16 reg,
> - unsigned int len, u32 *val)
> -{
> - u8 addr_buf[2], data_buf[4] = { };
> - struct i2c_msg msgs[2];
> - int ret;
> -
> - if (len > 4)
> - return -EINVAL;
> -
> - put_unaligned_be16(reg, addr_buf);
> -
> - msgs[0].addr = client->addr;
> - msgs[0].flags = 0;
> - msgs[0].len = ARRAY_SIZE(addr_buf);
> - msgs[0].buf = addr_buf;
> -
> - msgs[1].addr = client->addr;
> - msgs[1].flags = I2C_M_RD;
> - msgs[1].len = len;
> - msgs[1].buf = &data_buf[4 - len];
> -
> - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> - if (ret != ARRAY_SIZE(msgs)) {
> - dev_err(&client->dev, "read error: reg=0x%4x: %d\n", reg, ret);
> - return -EIO;
> - }
> -
> - *val = get_unaligned_be32(data_buf);
> -
> - return 0;
> -}
> -
> -#define ov_read_reg8(s, r, v) ov_read_reg(s, r, 1, v)
> -#define ov_read_reg16(s, r, v) ov_read_reg(s, r, 2, v)
> -#define ov_read_reg24(s, r, v) ov_read_reg(s, r, 3, v)
> -
> -static inline int ov_write_reg(struct i2c_client *client, u16 reg,
> - unsigned int len, u32 val)
> -{
> - u8 buf[6];
> - int ret;
> -
> - if (len > 4)
> - return -EINVAL;
> -
> - put_unaligned_be16(reg, buf);
> - put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
> - ret = i2c_master_send(client, buf, len + 2);
> - if (ret != len + 2) {
> - dev_err(&client->dev, "write error: reg=0x%4x: %d\n", reg, ret);
> - return -EIO;
> - }
> -
> - return 0;
> -}
> -
> -#define ov_write_reg8(s, r, v) ov_write_reg(s, r, 1, v)
> -#define ov_write_reg16(s, r, v) ov_write_reg(s, r, 2, v)
> -#define ov_write_reg24(s, r, v) ov_write_reg(s, r, 3, v)
> -
> -static inline int ov_update_reg(struct i2c_client *client, u16 reg, u8 mask, u8 val)
> -{
> - u32 readval;
> - int ret;
> -
> - ret = ov_read_reg8(client, reg, &readval);
> - if (ret < 0)
> - return ret;
> -
> - val = (readval & ~mask) | (val & mask);
> -
> - return ov_write_reg8(client, reg, val);
> -}
> -
> -#endif
> --
> 2.40.1
>
--
With Best Regards,
Andy Shevchenko
