Re: [PATCH v2 0/5] Enable decoder for mt8183

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 12/06/23 09:02, Hans Verkuil ha scritto:
Hi Nicolas,

On 07/06/2023 22:53, Nícolas F. R. A. Prado wrote:

This series enables the hardware decoder present on mt8183. At first
glance, the only missing piece is the devicetree node for it, however,
simply adding it as is would cause an address collision between the
first register iospace and the clock-controller node, so a rework of the
dt-binding and driver, as well as addition of a clock, were needed
first.

Tested that H264 decoding works with the hardware decoder on
mt8183-kukui-jacuzzi-juniper-sku16, giving a fluster score of 98/135 on
the JVT-AVC_V1 test suite. And ensured other SoCs (MT8192 and MT8195)
still work as usual.

Changes in v2:
- Merged commit 1 (media: dt-bindings: mediatek,vcodec: Allow single
   clock for mt8183) into commit 3 (media: dt-bindings: mediatek,vcodec:
   Remove VDEC_SYS for mt8183)
- Further constrained properties in dt-binding
- Added CLK_IGNORE_UNUSED flag to active clock
- Reformatted reg-names in DT node

Nícolas F. R. A. Prado (4):
   media: dt-bindings: mediatek,vcodec: Don't require assigned-clocks
   media: dt-bindings: mediatek,vcodec: Remove VDEC_SYS for mt8183
   media: mediatek: vcodec: Read HW active status from clock
   clk: mediatek: mt8183: Add CLK_VDEC_ACTIVE to vdec

Is the clk patch independent from the others? It's not clear to me.

If the clk patch has to go in together with the media patches, then
please let me know and post a v3 where the clk patch is also CC-ed to
the linux-media mailinglist to ensure it ends up in our patchwork system.

And in that case I need a Acked-by from the clk maintainer as well.

If it is independent, then there is no need for a v3 (at least, not
for this).


The clock patch is not independent, as in the devicetree changes will not
work without the addition of that clock (and of course even fail building),
so that series needs a v3.

Nícolas, please go on and send a v3 as requested.

Cheers,
Angelo

Regards,

	Hans


Yunfei Dong (1):
   arm64: dts: mediatek: mt8183: Add decoder

  .../media/mediatek,vcodec-decoder.yaml        | 65 +++++++++++++++----
  arch/arm64/boot/dts/mediatek/mt8183.dtsi      | 30 +++++++++
  drivers/clk/mediatek/clk-mt8183-vdec.c        |  5 ++
  .../mediatek/vcodec/mtk_vcodec_dec_drv.c      | 59 +++++++++++++----
  .../mediatek/vcodec/mtk_vcodec_dec_hw.c       | 20 ++++--
  .../mediatek/vcodec/mtk_vcodec_dec_pm.c       | 12 +++-
  .../platform/mediatek/vcodec/mtk_vcodec_drv.h |  1 +
  include/dt-bindings/clock/mt8183-clk.h        |  3 +-
  8 files changed, 165 insertions(+), 30 deletions(-)








[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux