The only sensor driver which needs GPIO remapping support is the ov2680
driver and ACPI enumeration support + other necessary changes to
the ov2680 driver were never upstreamed.
A new series updating the ov2680 driver is pending upstream now and
in this series the ov2680 driver is patched to look for "powerdown"
as con-id, instead of relying on GPIO remapping in the int3472 code,
so the GPIO remapping is no longer necessary.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/platform/x86/intel/int3472/common.h | 6 ---
drivers/platform/x86/intel/int3472/discrete.c | 37 ++-----------------
2 files changed, 3 insertions(+), 40 deletions(-)
diff --git a/drivers/platform/x86/intel/int3472/common.h b/drivers/platform/x86/intel/int3472/common.h
index 0c9c899e017b..735567f374a6 100644
--- a/drivers/platform/x86/intel/int3472/common.h
+++ b/drivers/platform/x86/intel/int3472/common.h
@@ -69,15 +69,9 @@ struct int3472_cldb {
u8 reserved2[17];
};
-struct int3472_gpio_function_remap {
- const char *documented;
- const char *actual;
-};
-
struct int3472_sensor_config {
const char *sensor_module_name;
struct regulator_consumer_supply supply_map;
- const struct int3472_gpio_function_remap *function_maps;
};
struct int3472_discrete_device {
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 8111579a59d4..2ab3c7466986 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -39,27 +39,13 @@ static const guid_t cio2_sensor_module_guid =
* the functions mapping resources to the sensors. Where the sensors have
* a power enable pin defined in DSDT we need to provide a supply name so
* the sensor drivers can find the regulator. The device name will be derived
- * from the sensor's ACPI device within the code. Optionally, we can provide a
- * NULL terminated array of function name mappings to deal with any platform
- * specific deviations from the documented behaviour of GPIOs.
- *
- * Map a GPIO function name to NULL to prevent the driver from mapping that
- * GPIO at all.
+ * from the sensor's ACPI device within the code.
*/
-
-static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = {
- { "reset", NULL },
- { "powerdown", "reset" },
- { }
-};
-
static const struct int3472_sensor_config int3472_sensor_configs[] = {
- /* Lenovo Miix 510-12ISK - OV2680, Front */
- { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps },
/* Lenovo Miix 510-12ISK - OV5648, Rear */
- { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL },
+ { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL) },
/* Surface Go 1&2 - OV5693, Front */
- { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL },
+ { "YHCU", REGULATOR_SUPPLY("avdd", NULL) },
};
static const struct int3472_sensor_config *
@@ -96,7 +82,6 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
struct acpi_resource_gpio *agpio,
const char *func, u32 polarity)
{
- const struct int3472_sensor_config *sensor_config;
char *path = agpio->resource_source.string_ptr;
struct gpiod_lookup *table_entry;
struct acpi_device *adev;
@@ -108,22 +93,6 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
return -EINVAL;
}
- sensor_config = int3472->sensor_config;
- if (!IS_ERR(sensor_config) && sensor_config->function_maps) {
- const struct int3472_gpio_function_remap *remap;
-
- for (remap = sensor_config->function_maps; remap->documented; remap++) {
- if (!strcmp(func, remap->documented)) {
- func = remap->actual;
- break;
- }
- }
- }
-
- /* Functions mapped to NULL should not be mapped to the sensor */
- if (!func)
- return 0;
-
status = acpi_get_handle(NULL, path, &handle);
if (ACPI_FAILURE(status))
return -EINVAL;
--
2.40.1
