The values and ranges of V4L2_CID_VBLANK are all computed,
so there is no reason for it to be a read only control.
Remove the register values from the mode lists, add the
handler, and remove the read only flag.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx258.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index 30bae7388c3a..c6fb649abb95 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -30,6 +30,8 @@
#define IMX258_VTS_30FPS_VGA 0x034c
#define IMX258_VTS_MAX 0xffff
+#define IMX258_REG_VTS 0x0340
+
/* HBLANK control - read only */
#define IMX258_PPL_DEFAULT 5352
@@ -202,8 +204,6 @@ static const struct imx258_reg mode_4208x3120_regs[] = {
{ 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x0C },
- { 0x0341, 0x50 },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -319,8 +319,6 @@ static const struct imx258_reg mode_2104_1560_regs[] = {
{ 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x06 },
- { 0x0341, 0x38 },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -436,8 +434,6 @@ static const struct imx258_reg mode_1048_780_regs[] = {
{ 0x0114, 0x03 },
{ 0x0342, 0x14 },
{ 0x0343, 0xE8 },
- { 0x0340, 0x03 },
- { 0x0341, 0x4C },
{ 0x0344, 0x00 },
{ 0x0345, 0x00 },
{ 0x0346, 0x00 },
@@ -803,6 +799,11 @@ static int imx258_set_ctrl(struct v4l2_ctrl *ctrl)
BIT(IMX258_HDR_RATIO_MAX));
}
break;
+ case V4L2_CID_VBLANK:
+ ret = imx258_write_reg(imx258, IMX258_REG_VTS,
+ IMX258_REG_VALUE_16BIT,
+ imx258->cur_mode->height + ctrl->val);
+ break;
default:
dev_info(&client->dev,
"ctrl(id:0x%x,val:0x%x) is not handled\n",
@@ -1214,9 +1215,6 @@ static int imx258_init_controls(struct imx258 *imx258)
IMX258_VTS_MAX - imx258->cur_mode->height, 1,
vblank_def);
- if (imx258->vblank)
- imx258->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-
imx258->hblank = v4l2_ctrl_new_std(
ctrl_hdlr, &imx258_ctrl_ops, V4L2_CID_HBLANK,
IMX258_PPL_DEFAULT - imx258->cur_mode->width,
--
2.25.1
