Some drivers which implement selections/crop only allow setting the format
with and height to either the crop rectangle width and height or to half
the crop rectangle width and height (binning). An example of such
a driver is the standard v4l2 ov5693 driver.
First set the crop rectangle to match the requested format
when trying or setting the sensor format, to match these drivers
expectations.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
.../staging/media/atomisp/pci/atomisp_cmd.c | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/staging/media/atomisp/pci/atomisp_cmd.c b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
index ce16850170c4..9dfc4bda24f5 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_cmd.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_cmd.c
@@ -3715,6 +3715,47 @@ static void atomisp_get_padding(struct atomisp_device *isp,
*padding_h = min_t(u32, (native_rect.height - height) & ~1, pad_h);
}
+static int atomisp_set_crop(struct atomisp_device *isp,
+ const struct v4l2_mbus_framefmt *format,
+ int which)
+{
+ struct atomisp_input_subdev *input = &isp->inputs[isp->asd.input_curr];
+ struct v4l2_subdev_state pad_state = {
+ .pads = &input->pad_cfg,
+ };
+ struct v4l2_subdev_selection sel = {
+ .which = which,
+ .target = V4L2_SEL_TGT_CROP,
+ .r.width = format->width,
+ .r.height = format->height,
+ };
+ int ret;
+
+ if (!input->crop_support)
+ return 0;
+
+ /* Cropping is done before binning, when binning double the crop rect */
+ if (input->binning_support && sel.r.width <= (input->active_rect.width / 2) &&
+ sel.r.height <= (input->active_rect.height / 2)) {
+ sel.r.width *= 2;
+ sel.r.height *= 2;
+ }
+
+ /* Clamp to avoid top/left calculations overflowing */
+ sel.r.width = min(sel.r.width, input->native_rect.width);
+ sel.r.height = min(sel.r.height, input->native_rect.height);
+
+ sel.r.left = ((input->native_rect.width - sel.r.width) / 2) & ~1;
+ sel.r.top = ((input->native_rect.height - sel.r.height) / 2) & ~1;
+
+ ret = v4l2_subdev_call(input->camera, pad, set_selection, &pad_state, &sel);
+ if (ret)
+ dev_err(isp->dev, "Error setting crop to %ux%u @%ux%u: %d\n",
+ sel.r.width, sel.r.height, sel.r.left, sel.r.top, ret);
+
+ return ret;
+}
+
/* This function looks up the closest available resolution. */
int atomisp_try_fmt(struct atomisp_device *isp, struct v4l2_pix_format *f,
const struct atomisp_format_bridge **fmt_ret,
@@ -3758,6 +3799,10 @@ int atomisp_try_fmt(struct atomisp_device *isp, struct v4l2_pix_format *f,
dev_dbg(isp->dev, "try_mbus_fmt: asking for %ux%u\n",
format.format.width, format.format.height);
+ ret = atomisp_set_crop(isp, &format.format, V4L2_SUBDEV_FORMAT_TRY);
+ if (ret)
+ return ret;
+
ret = v4l2_subdev_call(input->camera, pad, set_fmt, &pad_state, &format);
if (ret)
return ret;
@@ -4225,6 +4270,10 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev, const struct v4l2_p
/* Disable dvs if resolution can't be supported by sensor */
if (asd->params.video_dis_en && asd->run_mode->val == ATOMISP_RUN_MODE_VIDEO) {
+ ret = atomisp_set_crop(isp, &vformat.format, V4L2_SUBDEV_FORMAT_TRY);
+ if (ret)
+ return ret;
+
vformat.which = V4L2_SUBDEV_FORMAT_TRY;
ret = v4l2_subdev_call(input->camera, pad, set_fmt, &pad_state, &vformat);
if (ret)
@@ -4243,6 +4292,11 @@ static int atomisp_set_fmt_to_snr(struct video_device *vdev, const struct v4l2_p
asd->params.video_dis_en = false;
}
}
+
+ ret = atomisp_set_crop(isp, &vformat.format, V4L2_SUBDEV_FORMAT_ACTIVE);
+ if (ret)
+ return ret;
+
vformat.which = V4L2_SUBDEV_FORMAT_ACTIVE;
ret = v4l2_subdev_call(input->camera, pad, set_fmt, NULL, &vformat);
if (ret)
--
2.40.1
