[PATCH 17/21] media: atomisp: Make atomisp_init_sensor() check if the sensor supports binning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make atomisp_init_sensor() check if the sensor supports binning.

This is a preparation patch for using the selection / crop support
to determine the padding values to use with a specific sensor.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 .../media/atomisp/pci/atomisp_internal.h      |  1 +
 .../staging/media/atomisp/pci/atomisp_v4l2.c  | 30 +++++++++++++++++--
 2 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_internal.h b/drivers/staging/media/atomisp/pci/atomisp_internal.h
index 9fded17a2c71..f7b4bee9574b 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_internal.h
+++ b/drivers/staging/media/atomisp/pci/atomisp_internal.h
@@ -126,6 +126,7 @@ struct atomisp_input_subdev {
 	unsigned int type;
 	enum atomisp_camera_port port;
 	u32 code; /* MEDIA_BUS_FMT_* */
+	bool binning_support;
 	bool crop_support;
 	struct v4l2_subdev *camera;
 	/* Sensor rects for sensors which support crop */
diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
index 3a2e15605919..c43b916a006e 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
@@ -934,11 +934,12 @@ static int atomisp_register_entities(struct atomisp_device *isp)
 static void atomisp_init_sensor(struct atomisp_input_subdev *input)
 {
 	struct v4l2_subdev_mbus_code_enum mbus_code_enum = { };
+	struct v4l2_subdev_frame_size_enum fse = { };
 	struct v4l2_subdev_state sd_state = {
 		.pads = &input->pad_cfg,
 	};
 	struct v4l2_subdev_selection sel = { };
-	int err;
+	int i, err;
 
 	mbus_code_enum.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	err = v4l2_subdev_call(input->camera, pad, enum_mbus_code, NULL, &mbus_code_enum);
@@ -961,6 +962,28 @@ static void atomisp_init_sensor(struct atomisp_input_subdev *input)
 
 	input->active_rect = sel.r;
 
+	/*
+	 * Check for a framesize with half active_rect width and height,
+	 * if found assume the sensor supports binning.
+	 * Do this before changing the crop-rect since that may influence
+	 * enum_frame_size results.
+	 */
+	for (i = 0; ; i++) {
+		fse.index = i;
+		fse.code = input->code;
+		fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+
+		err = v4l2_subdev_call(input->camera, pad, enum_frame_size, NULL, &fse);
+		if (err)
+			break;
+
+		if (fse.min_width <= (input->active_rect.width / 2) &&
+		    fse.min_height <= (input->active_rect.height / 2)) {
+			input->binning_support = true;
+			break;
+		}
+	}
+
 	/*
 	 * The ISP also wants the non-active pixels at the border of the sensor
 	 * for padding, set the crop rect to cover the entire sensor instead
@@ -983,9 +1006,10 @@ static void atomisp_init_sensor(struct atomisp_input_subdev *input)
 	if (err)
 		return;
 
-	dev_info(input->camera->dev, "Supports crop native %dx%d active %dx%d\n",
+	dev_info(input->camera->dev, "Supports crop native %dx%d active %dx%d binning %d\n",
 		 input->native_rect.width, input->native_rect.height,
-		 input->active_rect.width, input->active_rect.height);
+		 input->active_rect.width, input->active_rect.height,
+		 input->binning_support);
 
 	input->crop_support = true;
 }
-- 
2.40.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux