Hi Tommaso, On Fri, May 26, 2023 at 07:39:43PM +0200, Tommaso Merciai wrote: > Add documentation of device tree in YAML schema for the ALVIUM > Camera from Allied Vision Inc. > > References: > - https://www.alliedvision.com/en/products/embedded-vision-solutions > > Signed-off-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx> > --- > Changes since v1: > - Fixed build error as suggested by RHerring bot > > .../media/i2c/alliedvision,alvium.yaml | 115 ++++++++++++++++++ > 1 file changed, 115 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > new file mode 100644 > index 000000000000..81e9e560c99d > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > @@ -0,0 +1,115 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Alliedvision Alvium Camera > + > +maintainers: > + - Tommaso Merciai <tomm.merciai@xxxxxxxxx> > + - Martin Hecht <martin.hecht@xxxxxxxx> > + > +allOf: > + - $ref: /schemas/media/video-interface-devices.yaml# > + > +properties: > + compatible: > + const: alliedvision,alvium > + > + reg: > + maxItems: 1 > + > + clocks: > + description: XCLK Input Clock > + > + clock-names: > + const: xclk I'd also drop this as you have a single clock only: it's redundant. > + > + powerdown-gpios: > + maxItems: 1 > + description: > > + Reference to the GPIO connected to the powerdown pin, if any. > + > + reset-gpios: > + maxItems: 1 > + description: > > + Reference to the GPIO connected to the reset pin, if any. > + > + streamon-delay: > + maxItems: 1 > + description: > > + Delay before camera start capturing frames in us. > + > + rotation: > + enum: > + - 0 > + - 180 > + > + port: > + description: Digital Output Port > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + const: 0 The driver can know this, no need to have it in DT, i.e. please drop it. > + data-lanes: > + minItems: 1 > + maxItems: 4 > + link-frequencies: true > + > + required: > + - data-lanes > + - link-frequencies > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/clock/imx8mp-clock.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera: alvium@3c { > + compatible = "alliedvision,alvium"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_csi0_pwn>, <&pinctrl_csi0_rst>, <&pinctrl_csi_mclk>; > + reg = <0x3c>; > + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; > + clock-names = "xclk"; > + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > + assigned-clock-rates = <24000000>; > + streamon-delay = <20>; > + powerdown-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > + status = "okay"; > + > + port { > + alvium_out: endpoint { > + remote-endpoint = <&mipi_csi_0_in>; > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <681250000>; > + clock-lanes = <0>; > + }; > + }; > + }; > + }; > + > +... -- Kind regards, Sakari Ailus
