Ok, just a couple more comments, all looking quite good so far, if we get
a new version soon enough, we still might manage it for 2.6.37
On Sat, 11 Sep 2010, Janusz Krzysztofik wrote:
[snip]
> +/* write a register */
> +static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val)
> +{
> + int ret;
> + unsigned char data[2] = { reg, val };
> + struct i2c_msg msg = {
> + .addr = client->addr,
> + .flags = 0,
> + .len = 2,
> + .buf = data,
> + };
> +
> + ret = i2c_transfer(client->adapter, &msg, 1);
> + msleep_interruptible(1);
Why do you want _interruptible here? Firstly it's just 1ms, secondly -
why?...
> +
> + if (ret < 0) {
> + dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
> + return ret;
> + }
> + return 0;
> +}
...
> +/* set the format we will capture in */
> +static int ov6650_s_fmt(struct v4l2_subdev *sd,
> + struct v4l2_mbus_framefmt *mf)
> +{
> + struct i2c_client *client = sd->priv;
> + struct soc_camera_device *icd = client->dev.platform_data;
> + struct soc_camera_sense *sense = icd->sense;
> + struct ov6650 *priv = to_ov6650(client);
> + enum v4l2_mbus_pixelcode code = mf->code;
> + unsigned long pclk;
> + u8 coma_set = 0, coma_mask = 0, coml_set = 0, coml_mask = 0;
> + u8 clkrc, clkrc_div;
> + int ret;
> +
> + /* select color matrix configuration for given color encoding */
> + switch (code) {
> + case V4L2_MBUS_FMT_GREY8_1X8:
> + dev_dbg(&client->dev, "pixel format GREY8_1X8\n");
> + coma_set |= COMA_BW;
> + coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP;
> + break;
> + case V4L2_MBUS_FMT_YUYV8_2X8:
> + dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n");
> + coma_set |= COMA_WORD_SWAP;
> + coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP;
> + break;
> + case V4L2_MBUS_FMT_YVYU8_2X8:
> + dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n");
> + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP |
> + COMA_BYTE_SWAP;
> + break;
> + case V4L2_MBUS_FMT_UYVY8_2X8:
> + dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n");
> + if (mf->width == W_CIF) {
> + coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
> + coma_mask |= COMA_RGB | COMA_BW;
> + } else {
> + coma_set |= COMA_BYTE_SWAP;
> + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
> + }
> + break;
> + case V4L2_MBUS_FMT_VYUY8_2X8:
> + dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n");
> + if (mf->width == W_CIF) {
> + coma_set |= COMA_BYTE_SWAP;
> + coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
> + } else {
> + coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
> + coma_mask |= COMA_RGB | COMA_BW;
> + }
> + break;
> + case V4L2_MBUS_FMT_SBGGR8_1X8:
> + dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n");
> + coma_set |= COMA_RAW_RGB | COMA_RGB;
> + coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
> + break;
> + default:
> + dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
> + return -EINVAL;
> + }
> + priv->code = code;
> +
> + if ((code == V4L2_MBUS_FMT_GREY8_1X8) ||
> + (code == V4L2_MBUS_FMT_SBGGR8_1X8)) {
Superfluous parenthesis
> + coml_mask |= COML_ONE_CHANNEL;
> + priv->pclk_max = 4000000;
> + } else {
> + coml_set |= COML_ONE_CHANNEL;
> + priv->pclk_max = 8000000;
> + }
coml_mask and coml_set are only set here and only used once below, so,
dropping initialisation to 0 in variable definitions and just doing
+ if (code == V4L2_MBUS_FMT_GREY8_1X8 ||
+ code == V4L2_MBUS_FMT_SBGGR8_1X8) {
+ coml_mask = COML_ONE_CHANNEL;
+ coml_set = 0;
+ priv->pclk_max = 4000000;
+ } else {
+ coml_mask = 0;
+ coml_set = COML_ONE_CHANNEL;
+ priv->pclk_max = 8000000;
+ }
would work too.
> +
> + if (code == V4L2_MBUS_FMT_SBGGR8_1X8)
> + priv->colorspace = V4L2_COLORSPACE_SRGB;
> + else
> + priv->colorspace = V4L2_COLORSPACE_JPEG;
> +
> + /*
> + * Select register configuration for given resolution.
> + * To be replaced with a common function that does it, once available.
> + */
> + ov6650_res_roundup(&mf->width, &mf->height);
> +
> + switch (mf->width) {
> + case W_QCIF:
> + dev_dbg(&client->dev, "resolution QCIF\n");
> + priv->qcif = 1;
> + coma_set |= COMA_QCIF;
> + priv->pclk_max /= 2;
> + break;
> + case W_CIF:
> + dev_dbg(&client->dev, "resolution CIF\n");
> + priv->qcif = 0;
> + coma_mask |= COMA_QCIF;
> + break;
> + default:
> + dev_err(&client->dev, "unspported resolution!\n");
> + return -EINVAL;
> + }
> +
> + priv->rect.left = DEF_HSTRT << !priv->qcif;
> + priv->rect.top = DEF_VSTRT << !priv->qcif;
> + priv->rect.width = mf->width;
> + priv->rect.height = mf->height;
Sorry, don't understand. The sensor can do both - cropping per HSTRT,
HSTOP, VSTRT and VSTOP and scaling per COMA_CIF / COMA_QCIF, right? But
which of them is stored in your priv->rect? Is this the input window
(cropping) or the output one (scaling)? You overwrite it in .s_fmt and
.s_crop...
> +
> + if (priv->timeperframe.numerator && priv->timeperframe.denominator)
> + pclk = priv->pclk_max * priv->timeperframe.denominator /
> + (FRAME_RATE_MAX * priv->timeperframe.numerator);
> + else
> + pclk = priv->pclk_max;
> +
> + if (sense) {
> + if (sense->master_clock == 8000000) {
> + dev_dbg(&client->dev, "8MHz input clock\n");
> + clkrc = CLKRC_6MHz;
> + } else if (sense->master_clock == 12000000) {
> + dev_dbg(&client->dev, "12MHz input clock\n");
> + clkrc = CLKRC_12MHz;
> + } else if (sense->master_clock == 16000000) {
> + dev_dbg(&client->dev, "16MHz input clock\n");
> + clkrc = CLKRC_16MHz;
> + } else if (sense->master_clock == 24000000) {
> + dev_dbg(&client->dev, "24MHz input clock\n");
> + clkrc = CLKRC_24MHz;
> + } else {
> + dev_err(&client->dev,
> + "unspported input clock, check platform data\n");
> + return -EINVAL;
> + }
> + priv->pclk_limit = sense->pixel_clock_max;
> + if (priv->pclk_limit && (priv->pclk_limit < pclk))
Don't think the compiler would complain without the internal parenthesis
here?
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
