From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> [ Upstream commit e10707d5865c90d3dfe4ef589ce02ff4287fef85 ] When adding proper support for V4L2_FIELD_ALTERNATE it was missed that this field format should trigger an interrupt for each field, not just for the whole frame. Fix this by marking it as progressive in the capture setup, which will then select the correct interrupt mode. Tested on both Gen2 and Gen3 with the result of a doubling of the frame rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is now 50, which is expected for alternate field capture. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/media/platform/rcar-vin/rcar-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c index e5f6360801082..5d6b7aaee2953 100644 --- a/drivers/media/platform/rcar-vin/rcar-dma.c +++ b/drivers/media/platform/rcar-vin/rcar-dma.c @@ -638,6 +638,7 @@ static int rvin_setup(struct rvin_dev *vin) vnmc = VNMC_IM_FULL | VNMC_FOC; break; case V4L2_FIELD_NONE: + case V4L2_FIELD_ALTERNATE: vnmc = VNMC_IM_ODD_EVEN; progressive = true; break; -- 2.39.2
