Re: [RESEND PATCH v3] mtd: rawnand: macronix: OTP access for MX30LFxG18AC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cc: Mason Yang <masonccyang@xxxxxxxxxxx> and Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>

On 11.05.2023 18:21, Arseniy Krasnov wrote:
> This adds support for OTP area access on MX30LFxG18AC chip series.
> 
> Changelog:
>   v1 -> v2:
>   * Add slab.h include due to kernel test robot error.
>   v2 -> v3:
>   * Use 'uint64_t' as input argument for 'do_div()' instead
>     of 'unsigned long' due to kernel test robot error.
> 
> Signed-off-by: Arseniy Krasnov <AVKrasnov@xxxxxxxxxxxxxx>
> ---
>  drivers/mtd/nand/raw/nand_macronix.c | 213 +++++++++++++++++++++++++++
>  1 file changed, 213 insertions(+)
> 
> diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
> index 1472f925f386..2301f990678e 100644
> --- a/drivers/mtd/nand/raw/nand_macronix.c
> +++ b/drivers/mtd/nand/raw/nand_macronix.c
> @@ -6,6 +6,7 @@
>   * Author: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
>   */
>  
> +#include <linux/slab.h>
>  #include "linux/delay.h"
>  #include "internals.h"
>  
> @@ -31,6 +32,20 @@
>  
>  #define MXIC_CMD_POWER_DOWN 0xB9
>  
> +#define ONFI_FEATURE_ADDR_30LFXG18AC_OTP	0x90
> +#define MACRONIX_30LFXG18AC_OTP_START_PAGE	0
> +#define MACRONIX_30LFXG18AC_OTP_PAGES		30
> +#define MACRONIX_30LFXG18AC_OTP_PAGE_SIZE	2112
> +#define MACRONIX_30LFXG18AC_OTP_START_BYTE	\
> +	(MACRONIX_30LFXG18AC_OTP_START_PAGE *	\
> +	 MACRONIX_30LFXG18AC_OTP_PAGE_SIZE)
> +#define MACRONIX_30LFXG18AC_OTP_SIZE_BYTES	\
> +	(MACRONIX_30LFXG18AC_OTP_PAGES *	\
> +	 MACRONIX_30LFXG18AC_OTP_PAGE_SIZE)
> +
> +#define MACRONIX_30LFXG18AC_OTP_EN		BIT(0)
> +#define MACRONIX_30LFXG18AC_OTP_LOCKED		BIT(1)
> +
>  struct nand_onfi_vendor_macronix {
>  	u8 reserved;
>  	u8 reliability_func;
> @@ -316,6 +331,203 @@ static void macronix_nand_deep_power_down_support(struct nand_chip *chip)
>  	chip->ops.resume = mxic_nand_resume;
>  }
>  
> +static int macronix_30lfxg18ac_get_otp_info(struct mtd_info *mtd, size_t len,
> +					    size_t *retlen,
> +					    struct otp_info *buf)
> +{
> +	if (len < sizeof(*buf))
> +		return -EINVAL;
> +
> +	/* Don't know how to check that OTP is locked. */
> +	buf->locked = 0;
> +	buf->start = MACRONIX_30LFXG18AC_OTP_START_BYTE;
> +	buf->length = MACRONIX_30LFXG18AC_OTP_SIZE_BYTES;
> +
> +	*retlen = sizeof(*buf);
> +
> +	return 0;
> +}
> +
> +static int macronix_30lfxg18ac_otp_enable(struct nand_chip *nand)
> +{
> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
> +
> +	feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN;
> +	return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
> +				 feature_buf);
> +}
> +
> +static int macronix_30lfxg18ac_otp_disable(struct nand_chip *nand)
> +{
> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
> +
> +	return nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
> +				 feature_buf);
> +}
> +
> +static int __macronix_30lfxg18ac_rw_otp(struct mtd_info *mtd,
> +					loff_t offs_in_flash,
> +					size_t len, size_t *retlen,
> +					u_char *buf, bool write)
> +{
> +	struct nand_chip *nand;
> +	size_t bytes_handled;
> +	off_t offs_in_page;
> +	uint64_t page;
> +	void *dma_buf;
> +	int ret;
> +
> +	/* 'nand_prog/read_page_op()' may use 'buf' as DMA buffer,
> +	 * so allocate properly aligned memory for it. This is
> +	 * needed because cross page accesses may lead to unaligned
> +	 * buffer address for DMA.
> +	 */
> +	dma_buf = kmalloc(MACRONIX_30LFXG18AC_OTP_PAGE_SIZE, GFP_KERNEL);
> +	if (!dma_buf)
> +		return -ENOMEM;
> +
> +	nand = mtd_to_nand(mtd);
> +	nand_select_target(nand, 0);
> +
> +	ret = macronix_30lfxg18ac_otp_enable(nand);
> +	if (ret)
> +		goto out_otp;
> +
> +	page = offs_in_flash;
> +	/* 'page' will be result of division. */
> +	offs_in_page = do_div(page, MACRONIX_30LFXG18AC_OTP_PAGE_SIZE);
> +	bytes_handled = 0;
> +
> +	while (bytes_handled < len &&
> +	       page < MACRONIX_30LFXG18AC_OTP_PAGES) {
> +		size_t bytes_to_handle;
> +
> +		bytes_to_handle = min_t(size_t, len - bytes_handled,
> +					MACRONIX_30LFXG18AC_OTP_PAGE_SIZE -
> +					offs_in_page);
> +
> +		if (write) {
> +			memcpy(dma_buf, &buf[bytes_handled], bytes_to_handle);
> +			ret = nand_prog_page_op(nand, page, offs_in_page,
> +						dma_buf, bytes_to_handle);
> +		} else {
> +			ret = nand_read_page_op(nand, page, offs_in_page,
> +						dma_buf, bytes_to_handle);
> +			if (!ret)
> +				memcpy(&buf[bytes_handled], dma_buf,
> +				       bytes_to_handle);
> +		}
> +		if (ret)
> +			goto out_otp;
> +
> +		bytes_handled += bytes_to_handle;
> +		offs_in_page = 0;
> +		page++;
> +	}
> +
> +	*retlen = bytes_handled;
> +
> +out_otp:
> +	if (ret)
> +		dev_err(&mtd->dev, "failed to perform OTP IO: %i\n", ret);
> +
> +	ret = macronix_30lfxg18ac_otp_disable(nand);
> +	WARN(ret, "failed to leave OTP mode after %s\n",
> +	     write ? "write" : "read");
> +	nand_deselect_target(nand);
> +	kfree(dma_buf);
> +
> +	return ret;
> +}
> +
> +static int macronix_30lfxg18ac_write_otp(struct mtd_info *mtd, loff_t to,
> +					 size_t len, size_t *rlen,
> +					 const u_char *buf)
> +{
> +	return __macronix_30lfxg18ac_rw_otp(mtd, to, len, rlen, (u_char *)buf,
> +					    true);
> +}
> +
> +static int macronix_30lfxg18ac_read_otp(struct mtd_info *mtd, loff_t from,
> +					size_t len, size_t *rlen,
> +					u_char *buf)
> +{
> +	return __macronix_30lfxg18ac_rw_otp(mtd, from, len, rlen, buf, false);
> +}
> +
> +static int macronix_30lfxg18ac_lock_otp(struct mtd_info *mtd, loff_t from,
> +					size_t len)
> +{
> +	uint8_t feature_buf[ONFI_SUBFEATURE_PARAM_LEN] = { 0 };
> +	struct nand_chip *nand;
> +	int ret;
> +
> +	if (from != MACRONIX_30LFXG18AC_OTP_START_BYTE ||
> +	    len != MACRONIX_30LFXG18AC_OTP_SIZE_BYTES)
> +		return -EINVAL;
> +
> +	dev_dbg(&mtd->dev, "locking OTP\n");
> +
> +	nand = mtd_to_nand(mtd);
> +	nand_select_target(nand, 0);
> +
> +	feature_buf[0] = MACRONIX_30LFXG18AC_OTP_EN |
> +			 MACRONIX_30LFXG18AC_OTP_LOCKED;
> +	ret = nand_set_features(nand, ONFI_FEATURE_ADDR_30LFXG18AC_OTP,
> +				feature_buf);
> +	if (ret) {
> +		dev_err(&mtd->dev,
> +			"failed to lock OTP (set features): %i\n", ret);
> +		nand_deselect_target(nand);
> +		return ret;
> +	}
> +
> +	/* Do dummy page prog with zero address. */
> +	feature_buf[0] = 0;
> +	ret = nand_prog_page_op(nand, 0, 0, feature_buf, 1);
> +	if (ret)
> +		dev_err(&mtd->dev,
> +			"failed to lock OTP (page prog): %i\n", ret);
> +
> +	ret = macronix_30lfxg18ac_otp_disable(nand);
> +	WARN(ret, "failed to leave OTP mode after lock\n");
> +
> +	nand_deselect_target(nand);
> +
> +	return ret;
> +}
> +
> +static void macronix_nand_setup_otp(struct nand_chip *chip)
> +{
> +	static const char * const supported_otp_models[] = {
> +		"MX30LF1G18AC",
> +		"MX30LF2G18AC",
> +		"MX30LF4G18AC",
> +	};
> +	struct mtd_info *mtd;
> +
> +	if (!chip->parameters.supports_set_get_features)
> +		return;
> +
> +	if (match_string(supported_otp_models,
> +			 ARRAY_SIZE(supported_otp_models),
> +			 chip->parameters.model) < 0)
> +		return;
> +
> +	bitmap_set(chip->parameters.get_feature_list,
> +		   ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1);
> +	bitmap_set(chip->parameters.set_feature_list,
> +		   ONFI_FEATURE_ADDR_30LFXG18AC_OTP, 1);
> +
> +	mtd = nand_to_mtd(chip);
> +	mtd->_get_fact_prot_info = macronix_30lfxg18ac_get_otp_info;
> +	mtd->_read_fact_prot_reg = macronix_30lfxg18ac_read_otp;
> +	mtd->_get_user_prot_info = macronix_30lfxg18ac_get_otp_info;
> +	mtd->_read_user_prot_reg = macronix_30lfxg18ac_read_otp;
> +	mtd->_write_user_prot_reg = macronix_30lfxg18ac_write_otp;
> +	mtd->_lock_user_prot_reg = macronix_30lfxg18ac_lock_otp;
> +}
> +
>  static int macronix_nand_init(struct nand_chip *chip)
>  {
>  	if (nand_is_slc(chip))
> @@ -325,6 +537,7 @@ static int macronix_nand_init(struct nand_chip *chip)
>  	macronix_nand_onfi_init(chip);
>  	macronix_nand_block_protection_support(chip);
>  	macronix_nand_deep_power_down_support(chip);
> +	macronix_nand_setup_otp(chip);
>  
>  	return 0;
>  }



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux