Add the controls V4L2_CID_{FOCUS,ZOOM}_{CURRENT,STATUS} that report the
current position and status, respectively, of the zoom lens group and
the focus lens group.
Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
.../userspace-api/media/v4l/ext-ctrls-camera.rst | 46 ++++++++++++++++++++++
drivers/media/v4l2-core/v4l2-ctrls-defs.c | 10 +++++
include/uapi/linux/v4l2-controls.h | 9 +++++
3 files changed, 65 insertions(+)
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
index 42cf4c3cda0c..3ea4175f9619 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst
@@ -150,6 +150,29 @@ enum v4l2_exposure_metering -
write-only control. It should be implemented only if the device cannot
handle absolute values.
+``V4L2_CID_FOCUS_CURRENT (integer)``
+ The current position of the focal point. The unit is undefined. Larger
+ values indicate that the focus is closer to the camera, smaller values
+ indicate that the focus is closer to infinity. This is a read-only control.
+
+``V4L2_CID_FOCUS_STATUS (bitmask)``
+ The status of the focus lens group. The possible flags are described in
+ the table below. This is a read-only control.
+
+.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_LENS_STATUS_IDLE``
+ - Focus lens group is at rest.
+ * - ``V4L2_LENS_STATUS_BUSY``
+ - Focus lens group is moving.
+ * - ``V4L2_LENS_STATUS_FAILED``
+ - Focus lens group has failed to reach its target position. The driver
+ will not transition from this state until another action is performed
+ by an application.
``V4L2_CID_FOCUS_AUTO (boolean)``
Enables continuous automatic focus adjustments. The effect of manual
@@ -241,6 +264,29 @@ enum v4l2_auto_focus_range -
movement. A negative value moves the zoom lens group towards the
wide-angle direction. The zoom speed unit is driver-specific.
+``V4L2_CID_ZOOM_CURRENT (integer)``
+ The current objective lens focal length. The unit is undefined and
+ its value should be a positive integer. This is a read-only control.
+
+``V4L2_CID_ZOOM_STATUS (bitmask)``
+ The status of the zoom lens group. The possible flags are described in
+ the table below. This is a read-only control.
+
+.. tabularcolumns:: |p{6.8cm}|p{10.7cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ * - ``V4L2_LENS_STATUS_IDLE``
+ - Zoom lens group is at rest.
+ * - ``V4L2_LENS_STATUS_BUSY``
+ - Zoom lens group is moving.
+ * - ``V4L2_LENS_STATUS_FAILED``
+ - Zoom lens group has failed to reach its target position. The driver will
+ not transition from this state until another action is performed by an
+ application.
+
``V4L2_CID_IRIS_ABSOLUTE (integer)``
This control sets the camera's aperture to the specified value. The
unit is undefined. Larger values open the iris wider, smaller values
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
index 564fedee2c88..794ef3ab0c02 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
@@ -1044,6 +1044,10 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_CAMERA_ORIENTATION: return "Camera Orientation";
case V4L2_CID_CAMERA_SENSOR_ROTATION: return "Camera Sensor Rotation";
case V4L2_CID_HDR_SENSOR_MODE: return "HDR Sensor Mode";
+ case V4L2_CID_FOCUS_CURRENT: return "Focus, Current";
+ case V4L2_CID_FOCUS_STATUS: return "Focus, Status";
+ case V4L2_CID_ZOOM_CURRENT: return "Zoom, Current";
+ case V4L2_CID_ZOOM_STATUS: return "Zoom, Status";
/* FM Radio Modulator controls */
/* Keep the order of the 'case's the same as in v4l2-controls.h! */
@@ -1593,6 +1597,12 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
*flags |= V4L2_CTRL_FLAG_WRITE_ONLY |
V4L2_CTRL_FLAG_EXECUTE_ON_WRITE;
break;
+ case V4L2_CID_FOCUS_CURRENT:
+ case V4L2_CID_FOCUS_STATUS:
+ case V4L2_CID_ZOOM_CURRENT:
+ case V4L2_CID_ZOOM_STATUS:
+ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE;
+ break;
case V4L2_CID_FLASH_STROBE_STATUS:
case V4L2_CID_AUTO_FOCUS_STATUS:
case V4L2_CID_FLASH_READY:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 5e80daa4ffe0..793ee8c65e87 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -993,6 +993,15 @@ enum v4l2_auto_focus_range {
#define V4L2_CID_HDR_SENSOR_MODE (V4L2_CID_CAMERA_CLASS_BASE+36)
+#define V4L2_LENS_STATUS_IDLE (0 << 0)
+#define V4L2_LENS_STATUS_BUSY (1 << 0)
+#define V4L2_LENS_STATUS_FAILED (1 << 2)
+
+#define V4L2_CID_FOCUS_CURRENT (V4L2_CID_CAMERA_CLASS_BASE+37)
+#define V4L2_CID_FOCUS_STATUS (V4L2_CID_CAMERA_CLASS_BASE+38)
+#define V4L2_CID_ZOOM_CURRENT (V4L2_CID_CAMERA_CLASS_BASE+39)
+#define V4L2_CID_ZOOM_STATUS (V4L2_CID_CAMERA_CLASS_BASE+40)
+
/* FM Modulator class control IDs */
#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
--
2.37.2
