Hi Martin,
Thank you for the patch.
On Mon, Apr 24, 2023 at 10:29:45AM +0200, Martin Kepplinger wrote:
> The imx8mq-mipi-csi2 mipi receiver driver is used and maintained. There
s/mipi/MIPI CSI-2/
> is no reason to keep it in staging. The accompanying CSI bridge driver that
> uses it is in drivers/media/platform/nxp as well.
>
> One TODO is to get rid of csi_state's "state" and "lock" variables. Especially
> make sure suspend/resume is working without them. That can very well be worked
> on from the new location.
>
> Add a MAINTAINERS section for the imx8mq-mipi-csi2 mipi receiver driver.
> It shares the CSI Bridge driver with the one from imx7 and imx8mm so the
> sections overlap a bit.
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> ---
> MAINTAINERS | 13 +++++++++++++
> drivers/media/platform/nxp/Kconfig | 11 +++++++++++
> drivers/media/platform/nxp/Makefile | 1 +
> .../imx => media/platform/nxp}/imx8mq-mipi-csi2.c | 0
> drivers/staging/media/imx/Kconfig | 12 +-----------
> drivers/staging/media/imx/Makefile | 2 --
> 6 files changed, 26 insertions(+), 13 deletions(-)
> rename drivers/{staging/media/imx => media/platform/nxp}/imx8mq-mipi-csi2.c (100%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f50945bb7d1b..fcd48408fc1f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12919,6 +12919,19 @@ F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> F: drivers/media/platform/nxp/imx-mipi-csis.c
> F: drivers/media/platform/nxp/imx7-media-csi.c
>
> +MEDIA DRIVERS FOR FREESCALE IMX8MQ
> +M: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> +R: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +R: Purism Kernel Team <kernel@xxxxxxx>
> +L: linux-media@xxxxxxxxxxxxxxx
> +S: Maintained
> +T: git git://linuxtv.org/media_tree.git
> +F: Documentation/admin-guide/media/imx7.rst
> +F: Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
> +F: Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> +F: drivers/media/platform/nxp/imx7-media-csi.c
> +F: drivers/media/platform/nxp/imx8mq-mipi-csi.c
> +
I'm not sure overlaps will be properly supported by all tools. I'd
rather avoid them. You can either
- Add this driver to the existing "MEDIA DRIVERS FOR FREESCALE IMX7"
section (possibly renaming it to 'IMX7/8'), and add yourself as a
maintainer to that section if desired.
- Create a new section as you're doing here, with just the CSI-2
receiver driver in it.
Additionally, I'd rename the "MEDIA DRIVERS FOR FREESCALE IMX" entry to
"MEDIA DRIVERS FOR FREESCALE IMX5/6". This could be done in a separate
patch though.
> MEDIA DRIVERS FOR HELENE
> M: Abylay Ospan <aospan@xxxxxxxx>
> L: linux-media@xxxxxxxxxxxxxxx
> diff --git a/drivers/media/platform/nxp/Kconfig b/drivers/media/platform/nxp/Kconfig
> index a0ca6b297fb8..efa985ec8a5f 100644
> --- a/drivers/media/platform/nxp/Kconfig
> +++ b/drivers/media/platform/nxp/Kconfig
> @@ -28,6 +28,17 @@ config VIDEO_IMX_MIPI_CSIS
> Video4Linux2 sub-device driver for the MIPI CSI-2 CSIS receiver
> v3.3/v3.6.3 found on some i.MX7 and i.MX8 SoCs.
>
> +config VIDEO_IMX8MQ_MIPI_CSI2
VIDEO_IMX8MQ_MIPI_CSI2 goes before VIDEO_IMX_MIPI_CSIS in alphabetical
order.
> + tristate "NXP i.MX8MQ MIPI CSI-2 receiver"
> + depends on ARCH_MXC || COMPILE_TEST
> + depends on VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select V4L2_FWNODE
> + select VIDEO_V4L2_SUBDEV_API
> + help
> + Video4Linux2 driver for the MIPI CSI-2 receiver found on the i.MX8MQ
> + SoC. The i.MX8MQ CSI Bridge is the same as on i.MX7.
Drop the second sentence, it's irrelevant here.
> +
> source "drivers/media/platform/nxp/imx8-isi/Kconfig"
>
> # mem2mem drivers
> diff --git a/drivers/media/platform/nxp/Makefile b/drivers/media/platform/nxp/Makefile
> index b8e672b75fed..4d90eb713652 100644
> --- a/drivers/media/platform/nxp/Makefile
> +++ b/drivers/media/platform/nxp/Makefile
> @@ -5,6 +5,7 @@ obj-y += imx-jpeg/
> obj-y += imx8-isi/
>
> obj-$(CONFIG_VIDEO_IMX7_CSI) += imx7-media-csi.o
> obj-$(CONFIG_VIDEO_IMX8MQ_MIPI_CSI2) += imx8mq-mipi-csi2.o
> obj-$(CONFIG_VIDEO_IMX_MIPI_CSIS) += imx-mipi-csis.o
> obj-$(CONFIG_VIDEO_IMX_PXP) += imx-pxp.o
> obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
> diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> similarity index 100%
> rename from drivers/staging/media/imx/imx8mq-mipi-csi2.c
> rename to drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
> index 21fd79515042..5b393e29d29e 100644
> --- a/drivers/staging/media/imx/Kconfig
> +++ b/drivers/staging/media/imx/Kconfig
> @@ -15,7 +15,7 @@ config VIDEO_IMX_MEDIA
> driver for the i.MX5/6 SOC.
>
> if VIDEO_IMX_MEDIA
> -menu "i.MX5/6/7/8 Media Sub devices"
> +menu "i.MX5/6 Media Sub devices"
>
> config VIDEO_IMX_CSI
I'm tempted to merge the VIDEO_IMX_MEDIA and VIDEO_IMX_CSI Kconfig
symbols. I'll send a patch to do so.
> tristate "i.MX5/6 Camera Sensor Interface driver"
> @@ -25,13 +25,3 @@ config VIDEO_IMX_CSI
> A video4linux camera sensor interface driver for i.MX5/6.
> endmenu
> endif
> -
> -config VIDEO_IMX8MQ_MIPI_CSI2
> - tristate "NXP i.MX8MQ MIPI CSI-2 receiver"
> - depends on ARCH_MXC || COMPILE_TEST
> - depends on VIDEO_DEV
> - select MEDIA_CONTROLLER
> - select V4L2_FWNODE
> - select VIDEO_V4L2_SUBDEV_API
> - help
> - V4L2 driver for the MIPI CSI-2 receiver found in the i.MX8MQ SoC.
> diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
> index 906a422aa656..b69951deff9a 100644
> --- a/drivers/staging/media/imx/Makefile
> +++ b/drivers/staging/media/imx/Makefile
> @@ -13,5 +13,3 @@ obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-common.o
> obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media.o
> obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media-csi.o
> obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
> -
> -obj-$(CONFIG_VIDEO_IMX8MQ_MIPI_CSI2) += imx8mq-mipi-csi2.o
--
Regards,
Laurent Pinchart
