Hi, I've recently obtained a Dvico FusionHDTV DVB-T Dual Express2, and found it is not the same card as the Dual Express. There is a chance I've done something particularly silly, but I've tried specifying card types etc, and so far had no luck. I believe this is a new hardware revision and currently unsupported. I've made a quick note on the wiki, but I wasn't sure if I should create a new page separate from the existing info page in the Dual Express. From memory the card looks identical to the pictures at http://www.linuxtv.org/wiki/index.php/DViCO_FusionHDTV_DVB-T_Dual_Express. My dmesg looks like: [ 17.112114] cx23885 driver version 0.0.2 loaded [ 17.140399] cx23885 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [ 17.140405] cx23885[0]: Your board isn't known (yet) to the driver. [ 17.140406] cx23885[0]: Try to pick one of the existing card configs via [ 17.140408] cx23885[0]: card=<n> insmod option. Updating to the latest [ 17.140409] cx23885[0]: version might help as well. [ 17.140412] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option: [ 17.140414] cx23885[0]: card=0 -> UNKNOWN/GENERIC [ 17.140416] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp [ 17.140419] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 [ 17.140421] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 [ 17.140423] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express [ 17.140426] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q [ 17.140428] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 [ 17.140430] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 [ 17.140432] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 [ 17.140435] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 [ 17.140437] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express [ 17.140439] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express [ 17.140442] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H [ 17.140444] cx23885[0]: card=13 -> Compro VideoMate E650F [ 17.140446] cx23885[0]: card=14 -> TurboSight TBS 6920 [ 17.140448] cx23885[0]: card=15 -> TeVii S470 [ 17.140451] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005 [ 17.140453] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI [ 17.140455] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270 [ 17.140457] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275 [ 17.140460] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255 [ 17.140462] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210 [ 17.140464] cx23885[0]: card=22 -> Mygica X8506 DMB-TH [ 17.140466] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2 [ 17.140469] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850 [ 17.140471] cx23885[0]: card=25 -> Compro VideoMate E800 [ 17.140473] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290 [ 17.140476] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH [ 17.140478] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200 [ 17.140553] CORE cx23885[0]: subsystem: 18ac:db98, board: UNKNOWN/GENERIC [card=0,autodetected] [ 17.355341] cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 17.355348] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf9000000 [ 17.355354] cx23885 0000:02:00.0: setting latency timer to 64 [ 17.355359] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 230.677212] cx23885 0000:02:00.0: PCI INT A disabled Loading the module with card=11 (looks like the most obvious choice) shows: [113131.257580] cx23885 driver version 0.0.2 loaded [113131.276294] cx23885 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16 [113131.276517] CORE cx23885[0]: subsystem: 18ac:db98, board: DViCO FusionHDTV DVB-T Dual Express [card=11,insmod option] [113131.512250] cx23885_dvb_register() allocating 1 frontend(s) [113131.512257] cx23885[0]: cx23885 based dvb card [113131.569079] cx23885[0]: frontend initialization failed [113131.569086] cx23885_dvb_register() dvb_register failed err = -1 [113131.569089] cx23885_dev_setup() Failed to register dvb adapters on VID_B [113131.569091] cx23885_dvb_register() allocating 1 frontend(s) [113131.569096] cx23885[0]: cx23885 based dvb card [113131.569492] cx23885[0]: frontend initialization failed [113131.569494] cx23885_dvb_register() dvb_register failed err = -1 [113131.569497] cx23885_dev_setup() Failed to register dvb on VID_C [113131.569501] cx23885_dev_checkrevision() Hardware revision = 0xa5 [113131.569508] cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xf9000000 [113131.569516] cx23885 0000:02:00.0: setting latency timer to 64 [113131.569521] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs I've tried a few different card types to see the results, but nothing much more promising than that. Is anyone familiar with this board? Any chance anyone has been tinkering with it? #lspci -vnn 02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04) Subsystem: DViCO Corporation Device [18ac:db98] Flags: fast devsel, IRQ 16 Memory at f9000000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel It seems like the DVICO dual express cards being shipped now might all be this new revision, so it might be worth spending a bit of time on. I'm happy to assist with more information if anyone is interested, otherwise I think I'm going to have to do a whole lot of reading (and tinkering). Mark -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
