Re: [PATCH 12/28] media: atomisp: gc0310: Add exposure and gain controls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 1, 2023 at 5:00 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> Add exposure and gain controls. This allows controlling
> the exposure and gain through standard v4l2 IOCTLs.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  .../media/atomisp/i2c/atomisp-gc0310.c        | 93 ++++++++++++++++---
>  drivers/staging/media/atomisp/i2c/gc0310.h    |  7 +-
>  2 files changed, 86 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> index 115493641010..6c0877ab96e3 100644
> --- a/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc0310.c
> @@ -57,14 +57,64 @@ static int gc0310_write_reg_array(struct i2c_client *client,
>         return 0;
>  }
>
> +static int gc0310_exposure_set(struct gc0310_device *dev, u32 exp)
> +{
> +       struct i2c_client *client = v4l2_get_subdevdata(&dev->sd);
> +
> +       return i2c_smbus_write_word_swapped(client, GC0310_AEC_PK_EXPO_H, exp);
> +}
> +
> +static int gc0310_gain_set(struct gc0310_device *dev, u32 gain)
> +{
> +       struct i2c_client *client = v4l2_get_subdevdata(&dev->sd);
> +       u8 again, dgain;
> +       int ret;
> +
> +       /* Taken from original driver, this never sets dgain lower then 32? */
> +
> +       /* Change 0 - 95 to 32 - 127 */
> +       gain += 32;
> +
> +       if (gain < 64) {
> +               again = 0x0; /* sqrt(2) */
> +               dgain = gain;
> +       } else {
> +               again = 0x2; /* 2 * sqrt(2) */
> +               dgain = gain / 2;
> +       }
> +
> +       ret = i2c_smbus_write_byte_data(client, GC0310_AGC_ADJ, again);
> +       if (ret)
> +               return ret;
> +
> +       ret = i2c_smbus_write_byte_data(client, GC0310_DGC_ADJ, dgain);
> +       if (ret)
> +               return ret;
> +
> +       return 0;

Can be

  return i2c_smbus_...;

> +}
> +
>  static int gc0310_s_ctrl(struct v4l2_ctrl *ctrl)
>  {
> -       int ret = 0;
> +       struct gc0310_device *dev =
> +               container_of(ctrl->handler, struct gc0310_device, ctrls.handler);
> +       int ret;
> +
> +       if (!dev->power_on)
> +               return 0;
>
>         switch (ctrl->id) {
> +       case V4L2_CID_EXPOSURE:
> +               ret = gc0310_exposure_set(dev, ctrl->val);
> +               break;
> +       case V4L2_CID_GAIN:
> +               ret = gc0310_gain_set(dev, ctrl->val);
> +               break;
>         default:
>                 ret = -EINVAL;
> +               break;
>         }
> +
>         return ret;

You can return directly from the switch cases. No need to utilise the
ret variable in it.

>  }
>
> @@ -83,13 +133,18 @@ static int gc0310_init(struct v4l2_subdev *sd)
>         /* set initial registers */
>         ret = gc0310_write_reg_array(client, gc0310_reset_register,
>                                      ARRAY_SIZE(gc0310_reset_register));
> +       if (ret)
> +               goto out_unlock;
>
>         /* restore settings */
>         gc0310_res = gc0310_res_preview;
>         N_RES = N_RES_PREVIEW;
>
> -       mutex_unlock(&dev->input_lock);
> +       /* restore value of all ctrls */
> +       ret = __v4l2_ctrl_handler_setup(&dev->ctrls.handler);
>
> +out_unlock:
> +       mutex_unlock(&dev->input_lock);
>         return ret;
>  }
>
> @@ -545,6 +600,26 @@ static const struct v4l2_subdev_ops gc0310_ops = {
>         .sensor = &gc0310_sensor_ops,
>  };
>
> +static int gc0310_init_controls(struct gc0310_device *dev)
> +{
> +       struct v4l2_ctrl_handler *hdl = &dev->ctrls.handler;
> +
> +       v4l2_ctrl_handler_init(hdl, 2);
> +
> +       /* Use same lock for controls as for everything else. */

the same

(and probably drop the period, since it's one-liner comment)

> +       hdl->lock = &dev->input_lock;
> +       dev->sd.ctrl_handler = hdl;
> +
> +       dev->ctrls.exposure =
> +               v4l2_ctrl_new_std(hdl, &ctrl_ops, V4L2_CID_EXPOSURE, 0, 4095, 1, 1023);
> +
> +       /* 32 steps at base gain 1 + 64 half steps at base gain 2 */
> +       dev->ctrls.gain =
> +               v4l2_ctrl_new_std(hdl, &ctrl_ops, V4L2_CID_GAIN, 0, 95, 1, 31);
> +
> +       return hdl->error;
> +}
> +
>  static void gc0310_remove(struct i2c_client *client)
>  {
>         struct v4l2_subdev *sd = i2c_get_clientdata(client);
> @@ -556,7 +631,7 @@ static void gc0310_remove(struct i2c_client *client)
>
>         v4l2_device_unregister_subdev(sd);
>         media_entity_cleanup(&dev->sd.entity);
> -       v4l2_ctrl_handler_free(&dev->ctrl_handler);
> +       v4l2_ctrl_handler_free(&dev->ctrls.handler);
>         kfree(dev);
>  }
>
> @@ -595,21 +670,13 @@ static int gc0310_probe(struct i2c_client *client)
>         dev->pad.flags = MEDIA_PAD_FL_SOURCE;
>         dev->format.code = MEDIA_BUS_FMT_SGRBG8_1X8;
>         dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> -       ret = v4l2_ctrl_handler_init(&dev->ctrl_handler, 0);
> +
> +       ret = gc0310_init_controls(dev);
>         if (ret) {
>                 gc0310_remove(client);
>                 return ret;
>         }
>
> -       if (dev->ctrl_handler.error) {
> -               gc0310_remove(client);
> -               return dev->ctrl_handler.error;
> -       }
> -
> -       /* Use same lock for controls as for everything else. */
> -       dev->ctrl_handler.lock = &dev->input_lock;
> -       dev->sd.ctrl_handler = &dev->ctrl_handler;
> -
>         ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
>         if (ret)
>                 gc0310_remove(client);
> diff --git a/drivers/staging/media/atomisp/i2c/gc0310.h b/drivers/staging/media/atomisp/i2c/gc0310.h
> index 540334bc7b0e..c15ca2b807f9 100644
> --- a/drivers/staging/media/atomisp/i2c/gc0310.h
> +++ b/drivers/staging/media/atomisp/i2c/gc0310.h
> @@ -126,12 +126,17 @@ struct gc0310_device {
>         struct media_pad pad;
>         struct v4l2_mbus_framefmt format;
>         struct mutex input_lock;
> -       struct v4l2_ctrl_handler ctrl_handler;
>
>         struct camera_sensor_platform_data *platform_data;
>         struct gc0310_resolution *res;
>         u8 type;
>         bool power_on;
> +
> +       struct gc0310_ctrls {
> +               struct v4l2_ctrl_handler handler;
> +               struct v4l2_ctrl *exposure;
> +               struct v4l2_ctrl *gain;
> +       } ctrls;
>  };
>
>  /**
> --
> 2.39.1
>


-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux