Hello Sakari,
On Tue, Mar 14, 2023 at 02:13:46PM +0200, Sakari Ailus wrote:
> On Mon, Mar 06, 2023 at 07:36:49AM +0100, Marcel Ziswiler wrote:
> > From: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
> >
> > Implement the introduced get_mbus_config operation to report the
> > config of the MIPI CSI-2, BT.656 and Parallel interface.
> >
> > Signed-off-by: Aishwarya Kothari <aishwarya.kothari@xxxxxxxxxxx>
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> >
> > ---
> >
> > Changes in v2:
> > - Take care of MIPI CSI-2, BT.656 and Parallel interface as
> > pointed out by Jacopo. Thanks!
> >
> > drivers/media/i2c/ov5640.c | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> > index 1536649b9e90..43373416fcba 100644
> > --- a/drivers/media/i2c/ov5640.c
> > +++ b/drivers/media/i2c/ov5640.c
> > @@ -3774,6 +3774,24 @@ static int ov5640_init_cfg(struct v4l2_subdev *sd,
> > return 0;
> > }
> >
> > +static int ov5640_get_mbus_config(struct v4l2_subdev *sd,
> > + unsigned int pad,
> > + struct v4l2_mbus_config *cfg)
> > +{
> > + struct ov5640_dev *sensor = to_ov5640_dev(sd);
> > +
> > + cfg->type = sensor->ep.bus_type;
> > + if (ov5640_is_csi2(sensor)) {
> > + cfg->bus.mipi_csi2.num_data_lanes =
> > + sensor->ep.bus.mipi_csi2.num_data_lanes;
> > + cfg->bus.mipi_csi2.flags = sensor->ep.bus.mipi_csi2.flags;
> > + } else {
> > + cfg->bus.parallel.flags = sensor->ep.bus.parallel.flags;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static const struct v4l2_subdev_core_ops ov5640_core_ops = {
> > .log_status = v4l2_ctrl_subdev_log_status,
> > .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > @@ -3794,6 +3812,7 @@ static const struct v4l2_subdev_pad_ops ov5640_pad_ops = {
> > .get_selection = ov5640_get_selection,
> > .enum_frame_size = ov5640_enum_frame_size,
> > .enum_frame_interval = ov5640_enum_frame_interval,
> > + .get_mbus_config = ov5640_get_mbus_config,
>
> What's the reasoning for this patch?
Without this it's not possible to use it on i.MX6,
drivers/staging/media/imx/imx6-mipi-csi2.c requires it, some more
details from Jacopo here [0].
Everything used to work fine up to v5.18, after that kernel version
various changes broke it [1][2] (I assume you are pretty much aware of
the history here, you commented on a few emails).
[0] https://lore.kernel.org/all/20230128100611.7ulsfqqqgscg54gy@uno.localdomain/
[1] https://lore.kernel.org/all/081cc2d3-1f3a-6c14-6dc7-53f976be7b2b@xxxxxxxxx/
[2] https://lore.kernel.org/all/cacfe146-101b-35b3-5f66-1a1cabfd342f@xxxxxxxxx/
> Drivers that don't have e.g. dynamic lane configuration shouldn't need to
> implement get_mbus_config.
Francesco
