Convert DT bindings document for Cadence MIPI-CSI2 RX controller
to DT schema format and add new properties.
Signed-off-by: Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/cdns,csi2rx.txt | 100 -----------
.../bindings/media/cdns,csi2rx.yaml | 163 ++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 164 insertions(+), 100 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt
create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
deleted file mode 100644
index 6b02a0657ad9..000000000000
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
- - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
- - reg: base address and size of the memory mapped region
- - clocks: phandles to the clocks driving the controller
- - clock-names: must contain:
- * sys_clk: main clock
- * p_clk: register bank clock
- * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
- implemented in hardware, between 0 and 3
-
-Optional properties:
- - phys: phandle to the external D-PHY, phy-names must be provided
- - phy-names: must contain "dphy", if the implementation uses an
- external D-PHY
-
-Required subnodes:
- - ports: A ports node with one port child node per device input and output
- port, in accordance with the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- port nodes are numbered as follows:
-
- Port Description
- -----------------------------
- 0 CSI-2 input
- 1 Stream 0 output
- 2 Stream 1 output
- 3 Stream 2 output
- 4 Stream 3 output
-
- The stream output port nodes are optional if they are not
- connected to anything at the hardware level or implemented
- in the design.Since there is only one endpoint per port,
- the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@0d060000 {
- compatible = "cdns,csi2rx";
- reg = <0x0d060000 0x1000>;
- clocks = <&byteclock>, <&byteclock>
- <&coreclock>, <&coreclock>,
- <&coreclock>, <&coreclock>;
- clock-names = "sys_clk", "p_clk",
- "pixel_if0_clk", "pixel_if1_clk",
- "pixel_if2_clk", "pixel_if3_clk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- csi2rx_in_sensor: endpoint {
- remote-endpoint = <&sensor_out_csi2rx>;
- clock-lanes = <0>;
- data-lanes = <1 2>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- csi2rx_out_grabber0: endpoint {
- remote-endpoint = <&grabber0_in_csi2rx>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- csi2rx_out_grabber1: endpoint {
- remote-endpoint = <&grabber1_in_csi2rx>;
- };
- };
-
- port@3 {
- reg = <3>;
-
- csi2rx_out_grabber2: endpoint {
- remote-endpoint = <&grabber2_in_csi2rx>;
- };
- };
-
- port@4 {
- reg = <4>;
-
- csi2rx_out_grabber3: endpoint {
- remote-endpoint = <&grabber3_in_csi2rx>;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
new file mode 100644
index 000000000000..ed573a67f93e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+maintainers:
+ - Maxime Ripard <mripard@xxxxxxxxxx>
+
+description:
+ The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+ lanes in input, and 4 different pixel streams in output.
+
+properties:
+ compatible:
+ enum:
+ - cdns,csi2rx
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: CSI2Rx system clock
+ - description: Gated Register bank clock for APB interface
+ - description: pixel Clock for Stream interface 0
+ - description: pixel Clock for Stream interface 1
+ - description: pixel Clock for Stream interface 2
+ - description: pixel Clock for Stream interface 3
+
+ clock-names:
+ items:
+ - const: sys
+ - const: reg_bank
+ - const: pixel_if0
+ - const: pixel_if1
+ - const: pixel_if2
+ - const: pixel_if3
+
+ resets:
+ items:
+ - description: CSI2Rx system reset
+ - description: Gated Register bank reset for APB interface
+ - description: pixel reset for Stream interface 0
+ - description: pixel reset for Stream interface 1
+ - description: pixel reset for Stream interface 2
+ - description: pixel reset for Stream interface 3
+
+ reset-names:
+ items:
+ - const: sys
+ - const: reg_bank
+ - const: pixel_if0
+ - const: pixel_if1
+ - const: pixel_if2
+ - const: pixel_if3
+
+ phys:
+ maxItems: 1
+ description: MIPI D-PHY
+
+ phy-names:
+ items:
+ - const: dphy
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ bus-type:
+ enum:
+ - 4
+
+ clock-lanes:
+ maximum: 4
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ csi2rx: csi@0d060000 {
+ compatible = "cdns,csi2rx";
+ reg = <0x0d060000 0x1000>;
+ clocks = <&byteclock 7>, <&byteclock 6>,
+ <&coreclock 8>, <&coreclock 9>,
+ <&coreclock 10>, <&coreclock 11>;
+ clock-names = "sys", "reg_bank",
+ "pixel_if0", "pixel_if1",
+ "pixel_if2", "pixel_if3";
+ resets = <&bytereset 9>, <&bytereset 4>,
+ <&corereset 5>, <&corereset 6>,
+ <&corereset 7>, <&corereset 8>;
+ reset-names = "sys", "reg_bank",
+ "pixel_if0", "pixel_if1",
+ "pixel_if2", "pixel_if3";
+ phys = <&csi_phy>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi2rx_in_sensor: endpoint {
+ remote-endpoint = <&sensor_out_csi2rx>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ csi2rx_out_grabber0: endpoint {
+ remote-endpoint = <&grabber0_in_csi2rx>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8ddef8669efb..b2e7ca5603c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4632,6 +4632,7 @@ M: Maxime Ripard <mripard@xxxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/devicetree/bindings/media/cdns,*.txt
+F: Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
F: drivers/media/platform/cadence/cdns-csi2*
CADENCE NAND DRIVER
--
2.34.1
