Em 29-08-2010 12:44, Mauro Carvalho Chehab escreveu: > Em 29-08-2010 03:40, Anton Blanchard escreveu: >> >> I'm seeing double IR events on 2.6.36-rc2 and a DViCO FusionHDTV DVB-T Dual >> Express. > There's one issue on touching on this constant: it is currently just one global > timeout value that will be used by all protocols. This timeout should be enough to > retrieve and proccess the repeat key event on all protocols, and on all devices, or > we'll need to do a per-protocol (and eventually per device) timeout init. From > http://www.sbprojects.com/knowledge/ir/ir.htm, we see that NEC prococol uses 110 ms > for repeat code, and we need some aditional time to wake up the decoding task. I'd > say that anything lower than 150-180ms would risk to not decode repeat events with > NEC. > > I got exactly the same problem when adding RC CORE support at the dib0700 driver. At > that driver, there's an additional time of sending/receiving URB's from USB. So, we > probably need a higher timeout. Even so, I tried to reduce the timeout to 200ms or 150ms > (not sure), but it didn't work. So, I ended by just patching the dibcom driver to do > dev->rep[REP_DELAY] = 500: Ok, just sent a patch adding it to rc-core, and removing from dib0700 driver. Cheers, Mauro. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html