Re: [Linux-stm32] [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Gatien,

On 27.01.23 17:40, Gatien Chevallier wrote:
> The STM32 System Bus is an internal bus on which devices are connected.
> ETZPC is a peripheral overseeing the firewall bus that configures
> and control access to the peripherals connected on it.
> 
> For more information on which peripheral is securable, please read
> the STM32MP13 reference manual.

Diff is way too big. Please split up the alphabetic reordering into its
own commit, so actual functional changes are apparent.

Thanks,
Ahmad

> 
> Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
> ---
> 
> No changes in V2.
> 
> Changes in V3:
> 	-Use appriopriate node name: bus
> 
>  arch/arm/boot/dts/stm32mp131.dtsi  | 407 +++++++++++++++--------------
>  arch/arm/boot/dts/stm32mp133.dtsi  |  51 ++--
>  arch/arm/boot/dts/stm32mp13xc.dtsi |  19 +-
>  arch/arm/boot/dts/stm32mp13xf.dtsi |  18 +-
>  4 files changed, 258 insertions(+), 237 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
> index accc3824f7e9..24462a647101 100644
> --- a/arch/arm/boot/dts/stm32mp131.dtsi
> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
> @@ -253,148 +253,6 @@ dmamux1: dma-router@48002000 {
>  			dma-channels = <16>;
>  		};
>  
> -		adc_2: adc@48004000 {
> -			compatible = "st,stm32mp13-adc-core";
> -			reg = <0x48004000 0x400>;
> -			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc ADC2>, <&rcc ADC2_K>;
> -			clock-names = "bus", "adc";
> -			interrupt-controller;
> -			#interrupt-cells = <1>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			status = "disabled";
> -
> -			adc2: adc@0 {
> -				compatible = "st,stm32mp13-adc";
> -				#io-channel-cells = <1>;
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -				reg = <0x0>;
> -				interrupt-parent = <&adc_2>;
> -				interrupts = <0>;
> -				dmas = <&dmamux1 10 0x400 0x80000001>;
> -				dma-names = "rx";
> -				status = "disabled";
> -
> -				channel@13 {
> -					reg = <13>;
> -					label = "vrefint";
> -				};
> -				channel@14 {
> -					reg = <14>;
> -					label = "vddcore";
> -				};
> -				channel@16 {
> -					reg = <16>;
> -					label = "vddcpu";
> -				};
> -				channel@17 {
> -					reg = <17>;
> -					label = "vddq_ddr";
> -				};
> -			};
> -		};
> -
> -		usbotg_hs: usb@49000000 {
> -			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
> -			reg = <0x49000000 0x40000>;
> -			clocks = <&rcc USBO_K>;
> -			clock-names = "otg";
> -			resets = <&rcc USBO_R>;
> -			reset-names = "dwc2";
> -			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> -			g-rx-fifo-size = <512>;
> -			g-np-tx-fifo-size = <32>;
> -			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> -			dr_mode = "otg";
> -			otg-rev = <0x200>;
> -			usb33d-supply = <&usb33>;
> -			status = "disabled";
> -		};
> -
> -		spi4: spi@4c002000 {
> -			compatible = "st,stm32h7-spi";
> -			reg = <0x4c002000 0x400>;
> -			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc SPI4_K>;
> -			resets = <&rcc SPI4_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			dmas = <&dmamux1 83 0x400 0x01>,
> -			       <&dmamux1 84 0x400 0x01>;
> -			dma-names = "rx", "tx";
> -			status = "disabled";
> -		};
> -
> -		spi5: spi@4c003000 {
> -			compatible = "st,stm32h7-spi";
> -			reg = <0x4c003000 0x400>;
> -			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc SPI5_K>;
> -			resets = <&rcc SPI5_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			dmas = <&dmamux1 85 0x400 0x01>,
> -			       <&dmamux1 86 0x400 0x01>;
> -			dma-names = "rx", "tx";
> -			status = "disabled";
> -		};
> -
> -		i2c3: i2c@4c004000 {
> -			compatible = "st,stm32mp13-i2c";
> -			reg = <0x4c004000 0x400>;
> -			interrupt-names = "event", "error";
> -			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc I2C3_K>;
> -			resets = <&rcc I2C3_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			dmas = <&dmamux1 73 0x400 0x1>,
> -			       <&dmamux1 74 0x400 0x1>;
> -			dma-names = "rx", "tx";
> -			st,syscfg-fmp = <&syscfg 0x4 0x4>;
> -			i2c-analog-filter;
> -			status = "disabled";
> -		};
> -
> -		i2c4: i2c@4c005000 {
> -			compatible = "st,stm32mp13-i2c";
> -			reg = <0x4c005000 0x400>;
> -			interrupt-names = "event", "error";
> -			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc I2C4_K>;
> -			resets = <&rcc I2C4_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			dmas = <&dmamux1 75 0x400 0x1>,
> -			       <&dmamux1 76 0x400 0x1>;
> -			dma-names = "rx", "tx";
> -			st,syscfg-fmp = <&syscfg 0x4 0x8>;
> -			i2c-analog-filter;
> -			status = "disabled";
> -		};
> -
> -		i2c5: i2c@4c006000 {
> -			compatible = "st,stm32mp13-i2c";
> -			reg = <0x4c006000 0x400>;
> -			interrupt-names = "event", "error";
> -			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> -				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc I2C5_K>;
> -			resets = <&rcc I2C5_R>;
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			dmas = <&dmamux1 115 0x400 0x1>,
> -			       <&dmamux1 116 0x400 0x1>;
> -			dma-names = "rx", "tx";
> -			st,syscfg-fmp = <&syscfg 0x4 0x10>;
> -			i2c-analog-filter;
> -			status = "disabled";
> -		};
> -
>  		rcc: rcc@50000000 {
>  			compatible = "st,stm32mp13-rcc", "syscon";
>  			reg = <0x50000000 0x1000>;
> @@ -431,34 +289,6 @@ mdma: dma-controller@58000000 {
>  			dma-requests = <48>;
>  		};
>  
> -		sdmmc1: mmc@58005000 {
> -			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> -			arm,primecell-periphid = <0x20253180>;
> -			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
> -			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc SDMMC1_K>;
> -			clock-names = "apb_pclk";
> -			resets = <&rcc SDMMC1_R>;
> -			cap-sd-highspeed;
> -			cap-mmc-highspeed;
> -			max-frequency = <130000000>;
> -			status = "disabled";
> -		};
> -
> -		sdmmc2: mmc@58007000 {
> -			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> -			arm,primecell-periphid = <0x20253180>;
> -			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
> -			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc SDMMC2_K>;
> -			clock-names = "apb_pclk";
> -			resets = <&rcc SDMMC2_R>;
> -			cap-sd-highspeed;
> -			cap-mmc-highspeed;
> -			max-frequency = <130000000>;
> -			status = "disabled";
> -		};
> -
>  		usbh_ohci: usb@5800c000 {
>  			compatible = "generic-ohci";
>  			reg = <0x5800c000 0x1000>;
> @@ -486,29 +316,6 @@ iwdg2: watchdog@5a002000 {
>  			status = "disabled";
>  		};
>  
> -		usbphyc: usbphyc@5a006000 {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -			#clock-cells = <0>;
> -			compatible = "st,stm32mp1-usbphyc";
> -			reg = <0x5a006000 0x1000>;
> -			clocks = <&rcc USBPHY_K>;
> -			resets = <&rcc USBPHY_R>;
> -			vdda1v1-supply = <&reg11>;
> -			vdda1v8-supply = <&reg18>;
> -			status = "disabled";
> -
> -			usbphyc_port0: usb-phy@0 {
> -				#phy-cells = <0>;
> -				reg = <0>;
> -			};
> -
> -			usbphyc_port1: usb-phy@1 {
> -				#phy-cells = <1>;
> -				reg = <1>;
> -			};
> -		};
> -
>  		rtc: rtc@5c004000 {
>  			compatible = "st,stm32mp1-rtc";
>  			reg = <0x5c004000 0x400>;
> @@ -536,6 +343,220 @@ ts_cal2: calib@5e {
>  			};
>  		};
>  
> +		etzpc: bus@5c007000 {
> +			compatible = "st,stm32mp13-sys-bus";
> +			reg = <0x5c007000 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			feature-domain-controller;
> +			#feature-domain-cells = <1>;
> +			ranges;
> +
> +			adc_2: adc@48004000 {
> +				compatible = "st,stm32mp13-adc-core";
> +				reg = <0x48004000 0x400>;
> +				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc ADC2>, <&rcc ADC2_K>;
> +				clock-names = "bus", "adc";
> +				interrupt-controller;
> +				#interrupt-cells = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				feature-domains = <&etzpc 33>;
> +				status = "disabled";
> +
> +				adc2: adc@0 {
> +					compatible = "st,stm32mp13-adc";
> +					#io-channel-cells = <1>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					reg = <0x0>;
> +					interrupt-parent = <&adc_2>;
> +					interrupts = <0>;
> +					dmas = <&dmamux1 10 0x400 0x80000001>;
> +					dma-names = "rx";
> +					status = "disabled";
> +
> +					channel@13 {
> +						reg = <13>;
> +						label = "vrefint";
> +					};
> +					channel@14 {
> +						reg = <14>;
> +						label = "vddcore";
> +					};
> +					channel@16 {
> +						reg = <16>;
> +						label = "vddcpu";
> +					};
> +					channel@17 {
> +						reg = <17>;
> +						label = "vddq_ddr";
> +					};
> +				};
> +			};
> +
> +			usbotg_hs: usb@49000000 {
> +				compatible = "st,stm32mp15-hsotg", "snps,dwc2";
> +				reg = <0x49000000 0x40000>;
> +				clocks = <&rcc USBO_K>;
> +				clock-names = "otg";
> +				resets = <&rcc USBO_R>;
> +				reset-names = "dwc2";
> +				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +				g-rx-fifo-size = <512>;
> +				g-np-tx-fifo-size = <32>;
> +				g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
> +				dr_mode = "otg";
> +				otg-rev = <0x200>;
> +				usb33d-supply = <&usb33>;
> +				feature-domains = <&etzpc 34>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@4c002000 {
> +				compatible = "st,stm32h7-spi";
> +				reg = <0x4c002000 0x400>;
> +				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc SPI4_K>;
> +				resets = <&rcc SPI4_R>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				dmas = <&dmamux1 83 0x400 0x01>,
> +				       <&dmamux1 84 0x400 0x01>;
> +				dma-names = "rx", "tx";
> +				feature-domains = <&etzpc 18>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@4c003000 {
> +				compatible = "st,stm32h7-spi";
> +				reg = <0x4c003000 0x400>;
> +				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc SPI5_K>;
> +				resets = <&rcc SPI5_R>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				dmas = <&dmamux1 85 0x400 0x01>,
> +				       <&dmamux1 86 0x400 0x01>;
> +				dma-names = "rx", "tx";
> +				feature-domains = <&etzpc 19>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@4c004000 {
> +				compatible = "st,stm32mp13-i2c";
> +				reg = <0x4c004000 0x400>;
> +				interrupt-names = "event", "error";
> +				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc I2C3_K>;
> +				resets = <&rcc I2C3_R>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				dmas = <&dmamux1 73 0x400 0x1>,
> +				       <&dmamux1 74 0x400 0x1>;
> +				dma-names = "rx", "tx";
> +				st,syscfg-fmp = <&syscfg 0x4 0x4>;
> +				i2c-analog-filter;
> +				feature-domains = <&etzpc 20>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@4c005000 {
> +				compatible = "st,stm32mp13-i2c";
> +				reg = <0x4c005000 0x400>;
> +				interrupt-names = "event", "error";
> +				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc I2C4_K>;
> +				resets = <&rcc I2C4_R>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				dmas = <&dmamux1 75 0x400 0x1>,
> +				       <&dmamux1 76 0x400 0x1>;
> +				dma-names = "rx", "tx";
> +				st,syscfg-fmp = <&syscfg 0x4 0x8>;
> +				i2c-analog-filter;
> +				feature-domains = <&etzpc 21>;
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@4c006000 {
> +				compatible = "st,stm32mp13-i2c";
> +				reg = <0x4c006000 0x400>;
> +				interrupt-names = "event", "error";
> +				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc I2C5_K>;
> +				resets = <&rcc I2C5_R>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				dmas = <&dmamux1 115 0x400 0x1>,
> +				       <&dmamux1 116 0x400 0x1>;
> +				dma-names = "rx", "tx";
> +				st,syscfg-fmp = <&syscfg 0x4 0x10>;
> +				i2c-analog-filter;
> +				feature-domains = <&etzpc 22>;
> +				status = "disabled";
> +			};
> +
> +			sdmmc1: mmc@58005000 {
> +				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> +				arm,primecell-periphid = <0x20253180>;
> +				reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
> +				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc SDMMC1_K>;
> +				clock-names = "apb_pclk";
> +				resets = <&rcc SDMMC1_R>;
> +				cap-sd-highspeed;
> +				cap-mmc-highspeed;
> +				max-frequency = <130000000>;
> +				feature-domains = <&etzpc 50>;
> +				status = "disabled";
> +			};
> +
> +			sdmmc2: mmc@58007000 {
> +				compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
> +				arm,primecell-periphid = <0x20253180>;
> +				reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
> +				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&rcc SDMMC2_K>;
> +				clock-names = "apb_pclk";
> +				resets = <&rcc SDMMC2_R>;
> +				cap-sd-highspeed;
> +				cap-mmc-highspeed;
> +				max-frequency = <130000000>;
> +				feature-domains = <&etzpc 51>;
> +				status = "disabled";
> +			};
> +
> +			usbphyc: usbphyc@5a006000 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				#clock-cells = <0>;
> +				compatible = "st,stm32mp1-usbphyc";
> +				reg = <0x5a006000 0x1000>;
> +				clocks = <&rcc USBPHY_K>;
> +				resets = <&rcc USBPHY_R>;
> +				vdda1v1-supply = <&reg11>;
> +				vdda1v8-supply = <&reg18>;
> +				feature-domains = <&etzpc 5>;
> +				status = "disabled";
> +
> +				usbphyc_port0: usb-phy@0 {
> +					#phy-cells = <0>;
> +					reg = <0>;
> +				};
> +
> +				usbphyc_port1: usb-phy@1 {
> +					#phy-cells = <1>;
> +					reg = <1>;
> +				};
> +			};
> +
> +		};
> +
>  		/*
>  		 * Break node order to solve dependency probe issue between
>  		 * pinctrl and exti.
> diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
> index df451c3c2a26..be6061552683 100644
> --- a/arch/arm/boot/dts/stm32mp133.dtsi
> +++ b/arch/arm/boot/dts/stm32mp133.dtsi
> @@ -33,35 +33,38 @@ m_can2: can@4400f000 {
>  			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
>  			status = "disabled";
>  		};
> +	};
> +};
>  
> -		adc_1: adc@48003000 {
> -			compatible = "st,stm32mp13-adc-core";
> -			reg = <0x48003000 0x400>;
> -			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc ADC1>, <&rcc ADC1_K>;
> -			clock-names = "bus", "adc";
> -			interrupt-controller;
> -			#interrupt-cells = <1>;
> +&etzpc {
> +	adc_1: adc@48003000 {
> +		compatible = "st,stm32mp13-adc-core";
> +		reg = <0x48003000 0x400>;
> +		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&rcc ADC1>, <&rcc ADC1_K>;
> +		clock-names = "bus", "adc";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		feature-domains = <&etzpc 32>;
> +		status = "disabled";
> +
> +		adc1: adc@0 {
> +			compatible = "st,stm32mp13-adc";
> +			#io-channel-cells = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> +			reg = <0x0>;
> +			interrupt-parent = <&adc_1>;
> +			interrupts = <0>;
> +			dmas = <&dmamux1 9 0x400 0x80000001>;
> +			dma-names = "rx";
>  			status = "disabled";
>  
> -			adc1: adc@0 {
> -				compatible = "st,stm32mp13-adc";
> -				#io-channel-cells = <1>;
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -				reg = <0x0>;
> -				interrupt-parent = <&adc_1>;
> -				interrupts = <0>;
> -				dmas = <&dmamux1 9 0x400 0x80000001>;
> -				dma-names = "rx";
> -				status = "disabled";
> -
> -				channel@18 {
> -					reg = <18>;
> -					label = "vrefint";
> -				};
> +			channel@18 {
> +				reg = <18>;
> +				label = "vrefint";
>  			};
>  		};
>  	};
> diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
> index 4d00e7592882..a1a7a40c2a3e 100644
> --- a/arch/arm/boot/dts/stm32mp13xc.dtsi
> +++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
> @@ -4,15 +4,14 @@
>   * Author: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> for STMicroelectronics.
>   */
>  
> -/ {
> -	soc {
> -		cryp: crypto@54002000 {
> -			compatible = "st,stm32mp1-cryp";
> -			reg = <0x54002000 0x400>;
> -			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc CRYP1>;
> -			resets = <&rcc CRYP1_R>;
> -			status = "disabled";
> -		};
> +&etzpc {
> +	cryp: crypto@54002000 {
> +		compatible = "st,stm32mp1-cryp";
> +		reg = <0x54002000 0x400>;
> +		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&rcc CRYP1>;
> +		resets = <&rcc CRYP1_R>;
> +		feature-domains = <&etzpc 42>;
> +		status = "disabled";
>  	};
>  };
> diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
> index 4d00e7592882..b9fb071a1471 100644
> --- a/arch/arm/boot/dts/stm32mp13xf.dtsi
> +++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
> @@ -4,15 +4,13 @@
>   * Author: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> for STMicroelectronics.
>   */
>  
> -/ {
> -	soc {
> -		cryp: crypto@54002000 {
> -			compatible = "st,stm32mp1-cryp";
> -			reg = <0x54002000 0x400>;
> -			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&rcc CRYP1>;
> -			resets = <&rcc CRYP1_R>;
> -			status = "disabled";
> -		};
> +&etzpc {
> +	cryp: crypto@54002000 {
> +		compatible = "st,stm32mp1-cryp";
> +		reg = <0x54002000 0x400>;
> +		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&rcc CRYP1>;
> +		resets = <&rcc CRYP1_R>;
> +		status = "disabled";
>  	};
>  };

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux