Commit "97589ad61c73 media: i2c: imx290: Add support for 2 data lanes" added support for running in two lane mode (instead of 4), but without changing the link frequency that resulted in a max of 30fps. Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency and pixel rate" then doubled the link frequency when in 2 lane mode, but didn't undo the correction for running at only 30fps, just extending horizontal blanking instead. Remove the 30fps limit on 2 lane by correcting the register config in accordance with the datasheet for 60fps operation over 2 lanes. Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> --- drivers/media/i2c/imx290.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index e83c458c7cf8..a5ea59353a4d 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -382,7 +382,7 @@ static const struct imx290_mode imx290_modes_2lanes[] = { { .width = 1920, .height = 1080, - .hmax = 4400, + .hmax = 2200, .link_freq_index = FREQ_INDEX_1080P, .data = imx290_1080p_settings, .data_size = ARRAY_SIZE(imx290_1080p_settings), @@ -390,7 +390,7 @@ static const struct imx290_mode imx290_modes_2lanes[] = { { .width = 1280, .height = 720, - .hmax = 6600, + .hmax = 3300, .link_freq_index = FREQ_INDEX_720P, .data = imx290_720p_settings, .data_size = ARRAY_SIZE(imx290_720p_settings), @@ -539,21 +539,10 @@ static int imx290_set_register_array(struct imx290 *imx290, static int imx290_set_data_lanes(struct imx290 *imx290) { int ret = 0; - u32 frsel; - - switch (imx290->nlanes) { - case 2: - default: - frsel = 0x02; - break; - case 4: - frsel = 0x01; - break; - } imx290_write(imx290, IMX290_PHY_LANE_NUM, imx290->nlanes - 1, &ret); imx290_write(imx290, IMX290_CSI_LANE_MODE, imx290->nlanes - 1, &ret); - imx290_write(imx290, IMX290_FR_FDG_SEL, frsel, &ret); + imx290_write(imx290, IMX290_FR_FDG_SEL, 0x01, &ret); return ret; } -- 2.34.1