Fix up a couple of coding style issues regarding missing blank
lines after declarations, double blank lines, and incorrect
indentation.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/imx290.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 9ce839541926..22d6194678bc 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -106,7 +106,6 @@
#define IMX290_VMAX_DEFAULT 1125
-
/*
* The IMX290 pixel array is organized as follows:
*
@@ -350,6 +349,7 @@ static const s64 imx290_link_freq_2lanes[] = {
[FREQ_INDEX_1080P] = 445500000,
[FREQ_INDEX_720P] = 297000000,
};
+
static const s64 imx290_link_freq_4lanes[] = {
[FREQ_INDEX_1080P] = 222750000,
[FREQ_INDEX_720P] = 148500000,
@@ -485,7 +485,7 @@ static int __always_unused imx290_read(struct imx290 *imx290, u32 addr, u32 *val
data, (addr >> IMX290_REG_SIZE_SHIFT) & 3);
if (ret < 0) {
dev_err(imx290->dev, "%u-bit read from 0x%04x failed: %d\n",
- ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
+ ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
addr & IMX290_REG_ADDR_MASK, ret);
return ret;
}
@@ -506,7 +506,7 @@ static int imx290_write(struct imx290 *imx290, u32 addr, u32 value, int *err)
data, (addr >> IMX290_REG_SIZE_SHIFT) & 3);
if (ret < 0) {
dev_err(imx290->dev, "%u-bit write to 0x%04x failed: %d\n",
- ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
+ ((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
addr & IMX290_REG_ADDR_MASK, ret);
if (err)
*err = ret;
@@ -772,8 +772,7 @@ static int imx290_start_streaming(struct imx290 *imx290,
/* Set init register settings */
ret = imx290_set_register_array(imx290, imx290_global_init_settings,
- ARRAY_SIZE(
- imx290_global_init_settings));
+ ARRAY_SIZE(imx290_global_init_settings));
if (ret < 0) {
dev_err(imx290->dev, "Could not set init registers\n");
return ret;
--
2.34.1
