The IMX290 module is available as either monochrome or colour and
the variant is not detectable at runtime.
Add a new compatible string for the monochrome version.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/media/i2c/sony,imx290.yaml | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
index 21377daae026..dacecb0cd9aa 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -12,15 +12,23 @@ maintainers:
description: |-
The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
- Pixel for Color Cameras. It is programmable through I2C and 4-wire
- interfaces. The sensor output is available via CMOS logic parallel SDR
- output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
- bus is the default. No bindings have been defined for the other busses.
+ Pixel, available in either mono or colour variants.
+ It is programmable through I2C and 4-wire interfaces.
+
+ The sensor output is available via CMOS logic parallel SDR output, Low voltage
+ LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default.
+ No bindings have been defined for the other busses.
+
+ imx290lqr is the full model identifier for the colour variant. "sony,imx290"
+ is treated the same as this as it was the original compatible string.
+ imx290llr is the mono version of the sensor.
properties:
compatible:
enum:
- sony,imx290
+ - sony,imx290lqr
+ - sony,imx290llr
reg:
maxItems: 1
--
2.34.1
