Re: [PATCH v2 1/4] media: i2c: ov2685: Make reset gpio optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mittwoch, 1. Februar 2023 18:24:10 CET Dave Stevenson wrote:
> Hi Luca
> 
> On Wed, 1 Feb 2023 at 17:07, Luca Weiss <luca@xxxxxxxxx> wrote:
> > In some setups XSHUTDOWN is connected to DOVDD when it's unused,
> > therefore treat the reset gpio as optional.
> 
> The binding doc [1] says that reset-gpios is a required property.
> Making it optional should therefore have a patch for the binding
> first, and then a patch updating the driver.
> Unfortunately my understanding is that means converting it to YAML as
> well due to the txt docs being frozen.

I already have the docs converted somewhere, I will send that separately. Hope 
that's okay.

Regards
Luca

> 
> I know the pain - I was doing exactly the same thing for ov7251 earlier
> today. I haven't run the dt schema checks or had them reviewed yet, but
> "media: dt-bindings: Convert ov7251.txt to YAML" and "media:
> dt-bindings: ov7251: Make enable-gpio optional" on [2] may be of help
> to you.
> 
>   Dave
> 
> [1]
> https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bind
> ings/media/i2c/ov2685.txt#L10 [2]
> https://github.com/6by9/linux/commits/rpi-6.2.y-ov7251
> 
> > Reviewed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> > ---
> > 
> >  drivers/media/i2c/ov2685.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
> > index a3b524f15d89..a422f4c8a2eb 100644
> > --- a/drivers/media/i2c/ov2685.c
> > +++ b/drivers/media/i2c/ov2685.c
> > @@ -734,7 +734,7 @@ static int ov2685_probe(struct i2c_client *client,
> > 
> >         if (clk_get_rate(ov2685->xvclk) != OV2685_XVCLK_FREQ)
> >         
> >                 dev_warn(dev, "xvclk mismatched, modes are based on
> >                 24MHz\n");
> > 
> > -       ov2685->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > +       ov2685->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> > GPIOD_OUT_LOW);> 
> >         if (IS_ERR(ov2685->reset_gpio)) {
> >         
> >                 dev_err(dev, "Failed to get reset-gpios\n");
> >                 return -EINVAL;
> > 
> > --
> > 2.39.1







[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux