The IMX290 module is available as either monochrome or colour and
the variant is not detectable at runtime.
Add a new compatible string for the monochrome version.
Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/sony,imx290.yaml | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
index 21377daae026..29ca4052591f 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -12,15 +12,17 @@ maintainers:
description: |-
The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
- Pixel for Color Cameras. It is programmable through I2C and 4-wire
- interfaces. The sensor output is available via CMOS logic parallel SDR
- output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
+ Pixel, available in either mono or colour variants.
+ It is programmable through I2C and 4-wire interfaces.
+ The sensor output is available via CMOS logic parallel SDR output, Low
+ voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
bus is the default. No bindings have been defined for the other busses.
properties:
compatible:
enum:
- sony,imx290
+ - sony,imx290-mono
reg:
maxItems: 1
--
2.34.1
